Odroid H2+, Realtek RTL8125B drivers

chris256 · August 17, 2020 at 2:36 PM

smp Have you tried this build and do you have the same issue? Thanks !

**smp** · August 17, 2020 at 3:13 PM

It works fine here on my Asrock J4105 board. Did you install it on Odroid H2+ or some other device? It will not work on nvidia.

chris256 · August 17, 2020 at 4:49 PM

smp I used it with a PC X86_64 intel with an nvidia graphic card 😅 Any solution for using it with nvidia ? Thanks again!

**smp** · August 17, 2020 at 6:34 PM

Quote from chris256

Any solution for using it with nvidia

Nvidia requires an X11 build. I only do GBM builds which only work on Intel and AMD GPUs.

chris256 · August 17, 2020 at 7:27 PM

Quote from smp

Nvidia requires an X11 build. I only do GBM builds which only work on Intel and AMD GPUs.

Too bad. Thanks for your reply. Do you have another solution or idea for my case? Thanks!

**smp** · August 18, 2020 at 12:26 AM

chris256 Try this.

chris256 · August 18, 2020 at 6:47 AM

Quote from smp

chris256 Try this.

Thank you very much!... But this time it does not install. I have this error at the boot on the USB installer key:

Error in mount_flash: mount_common: could not mount UUID=1808-1038
Starting debugging shell...

I have the cursor but the keyboard is not working in the shell. Also I tried to re-download and re-burn the key but same result.
I am not lucky 😅

Thanks you for your patience!

fab233 · August 18, 2020 at 2:23 PM

I have got that previously when copying files rather than rebuilding the whole image on the usb dongle ...

chris256 · August 18, 2020 at 9:01 PM

Quote from fab233

I have got that previously when copying files rather than rebuilding the whole image on the usb dongle ...

Thanks for your reply! In fact I used the Windows libreelec utility to burn the USB key. Should I proceed differently?

chris256 · August 18, 2020 at 11:00 PM

Quote from smp

chris256 Try this.

Hello ! I don’t know if you saw my post above but I can’t install your new version, problem when booting the USB key (see details above). Could you please have a look when you have time ? Thanks !!

**smp** · August 18, 2020 at 11:13 PM

Yeah, it doesn't boot for some reason. No idea why yet.

Edit: I just tried the current nightly image, the installation USB also didn't boot. Looks like it's an issue with the current LE master.

chris256 · August 19, 2020 at 8:01 AM

Quote from smp

Yeah, it doesn't boot for some reason. No idea why yet.

Edit: I just tried the current nightly image, the installation USB also didn't boot. Looks like it's an issue with the current LE master.

Good news! So once this is corrected, that would be nice if you could do another image with nvidia 😁 Thanks !! (Unless you can already do one with older source)

**smp** · August 19, 2020 at 2:42 PM

chris256 It will probably work if you update over a working image (e.g. official 9.2.4).

chris256 · August 19, 2020 at 2:47 PM

Quote from smp

chris256 It will probably work if you update over a working image (e.g. official 9.2.4).

Ok ! I’ll try that. How can I do it? I always updated from internet...

**mglae** · August 19, 2020 at 3:43 PM

smp It's a bug in kernel 5.8 update, XHCI driver is now module in Generic and not available at boot time any more: Generic: Update linux config · LibreELEC/LibreELEC.tv@4f328a6 · GitHub

chris256 · August 19, 2020 at 3:59 PM

mglae Hi! With an update instead of FRE ash install it should work?

**smp** · August 19, 2020 at 4:07 PM

Quote from chris256

How can I do it? I

Copy the image to /storage/.update and reboot

**mglae** · August 19, 2020 at 4:15 PM

chris256 Yes, if your system is not installed on an USB device.