Problem with boot Libreelec on usb stick

  • Hello everyone !

    I created a LibreElec boot key from the live usb-SD Creator.

    I then restarted my Windows PC which boots on my usb key and I arrive on a page with 3 choices: install, live and run.

    After 5 seconds the page closes and the PC restarts and boots again on the USB key.

    I arrive on the same page and I write RUN then I validate by ENTER

    Again the PC restarts, boot on my usb stick and come back to this same page.

    I tried all the options (RUN, INSTALL and LIVE) but it restarts the PC each time.

    Where can the problem come from?

    By default if you don't touch anything, LibreElec is supposed to be installed on the HDD / SSD or in RUN mode?

    Are the performances in RUN mode good?

    Thank you in advance for your answers.

  • I then restarted my Windows PC

    Some more details would be nice, such as which graphics card / GPU is in your Windows machine.

    Also: be careful running the LibreELEC onto your pc. Should you choose to install, EVERYTHING WILL BE WIPED from the selected target device.

  • I apologize for the lack of information.

    I solved my problem.

    In my bios I had selected boot on usb but there were several options (Legacy, UEFI) and I had not selected the correct one.

    Thank you for everything.