No audio when resume from suspend

zorrua · October 31, 2016 at 10:00 PM

Hello,

I have 7.0.2 image in a PC with ATI Radeon HD 5400 GPU card. It works well, the only problem is that audio is not working when resume from suspend.

I must go to settings -> system and it automatically start playing well. It looks like it activate something when I go to settings->system.

How could I debug it?

I have audio output to HDMI in my TV.

I will really appreciate your help.

Kind regards.

**lrusak** · October 31, 2016 at 10:40 PM Official Post

Update to the latest alpha build and post back if it is still happening.

zorrua · November 4, 2016 at 3:39 PM

Quote from lrusak

Update to the latest alpha build and post back if it is still happening.

Hello,

Same happens in v7.90.007

Do you need some logs?

Regards

ekalin · November 6, 2016 at 11:22 AM

I'm having the same issue, on v7.90.008. My hardware is similar:

Code

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Caicos [Radeon HD 6450/7450/8450 / R5 230 OEM]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Caicos HDMI Audio [Radeon HD 6400 Series]

There are many reports about no sound after resume, with possible workarounds, but generally they're for cases where it's not possible at all to get sound unless a reboot is done. In our case, simply entering the "Settings->System" screen is enough to get audio back.

It's quite possible this is a kernel problem, but since audio comes back after display the settings screen, something is done that makes audio work again. If this could be isolated, then perhaps it could be automated to happen at every resume.

I found another report of this problem also: LibreELEC

sakos · November 6, 2016 at 12:10 PM

Hi,

I have the same problem. See my topic here: LibreELEC
I also registered a bug here: LibreELEC
Very annoying fault but no progress so far, absolutely nothing.

I found that the problem occurs only if the display refresh rate is set to 50Hz and works fine with 60Hz., however 60Hz does not fit to my needs.

ekalin · December 31, 2016 at 7:12 PM

This problem still exists on v.7.90.010.