[RPi3] Freeze during stream

SlaSerX · February 19, 2019 at 6:41 PM

Hello i use last version of LibreELEC but Kodi Freeze during stream with tvheadend services. When freeze need only to restart kodi services and all its work again but freeze after 5-10 min

kodi log

Code

18:28:53.229 T:1608500080   ERROR:   File "/usr/lib/python2.7/SocketServer.py", line 318, in process_request
18:28:53.229 T:1608500080   ERROR:   File "/usr/lib/python2.7/SocketServer.py", line 331, in finish_request
18:28:53.230 T:1608500080   ERROR:   File "/usr/lib/python2.7/SocketServer.py", line 654, in __init__
18:28:53.230 T:1608500080   ERROR:   File "/usr/lib/python2.7/SocketServer.py", line 713, in finish
18:28:53.230 T:1608500080   ERROR:   File "/usr/lib/python2.7/socket.py", line 283, in close
18:28:53.230 T:1608500080   ERROR:   File "/usr/lib/python2.7/socket.py", line 307, in flush
18:28:53.230 T:1608500080   ERROR: error: [Errno 32] Broken pipe
18:28:55.928 T:1649693552   ERROR: OpenConnection - could not opening a connection to the CEC adapter
18:29:01.710 T:1908941680  NOTICE: CAESinkPi:AddPackets Underrun (delay:0.00 frames:2205)
18:29:15.938 T:1649693552   ERROR: OpenConnection - could not opening a connection to the CEC adapter

**Klojum** · February 19, 2019 at 6:49 PM Official Post

Wow... 10 whole log line entries.

We prefer to receive the complete log puzzle, via a pastebin website near you.

cmb · February 19, 2019 at 7:49 PM

Along with a log it might be beneficial to know a few other things.

When the stream freezes, do you have control of LibreElec with a keyboard, mouse or a remote control device or are they frozen too? That is, do you have to remove power from the Raspberry Pi to revive LibreElec?

When the stream freezes, is there any activity of the green OK/ACT LED on the Raspberry Pi? That's the SD card activity indicator. Any toggling of that light-emitting diode shows that there is some process still running. LibreElec isn't completely frozen.

If you have an Ethernet connection to the Internet, take a look at the two LEDs at the RJ45 connector on the Raspberry Pi. The yellow 10M/100 indicator is probably on showing a valid connection. Is the green LNK LED flashing? That indicates some data transmission in progress.

SlaSerX · February 20, 2019 at 7:22 PM

How i can enable debug on kodi via ssh

SlaSerX · February 20, 2019 at 7:34 PM

When i edit guisettings.xml and i set true restart kodi and again in .xml is still false

**Klojum** · February 20, 2019 at 7:43 PM Official Post

You probably need to stop Kodi, make your edits, and restart Kodi.

systemctl stop kodi

-- edit stuff and save it

systemctl stop kodi

SlaSerX · February 20, 2019 at 8:06 PM

i make it

Code

  <setting id="debug.extralogging" default="true">true</setting>
    <setting id="debug.screenshotpath" default="true">/storage/screenshots/</setting>
    <setting id="debug.setextraloglevel" default="true">1</setting>

save and start kodi but when i check again still false

**Klojum** · February 20, 2019 at 8:20 PM Official Post

You can also use the advancedsettings.xml file for enabling debugging, by setting the <loglevel> tag to 1. Then reboot LibreELEC.

Gizi · April 27, 2019 at 8:50 AM

Hi,

I have exact the same problem.

When I stream something I get a complete freeze.

Sometimes it lasts 5 minutes. And sometimes it lasts 20 minutes till the freeze.

I attempt to turn logging on but the devices is freezing so hard that there is no error.

I already changed the power device to a original. I already changed the SD card and I implemented a fan for cooling. No change

Gizi · April 27, 2019 at 7:27 PM

OK, I have fixed the problem, running now 2 hours without problems.

Changed the SD card to a new one.