Hi,
i have some problems to get the IQAudio-DigiAmp+ to work on a Raspberry.
I added the Overlay in config.txt and can select the Audio-Output
but there is no sound on Playback.
Is there somthing more configuration to do?
Thanks
Thomas
IQAudio DigiAmp+
-
kordi -
January 20, 2019 at 4:52 PM -
Thread is Resolved
-
-
- Official Post
What version of LE are you using and on what Raspberry PI?
-
Hardware is a Raspberry 3B and I tried some versions of LE 8.2,5; 8.95.003
also an OpenElec all with the same result.
With Testimage from IQAudio the Hardware is working and sounds good.
-
- Official Post
Try removing the dtoverlay and use the latest LE version. Also try commenting out dtparam=audio=on in config.txt
If that doesn't work, a lot more information will be required. See Here
-
Hi Iridium,
when i remove the dtoverlay from config.txt then the IQAudio Device is not present in Audio settings.
With the dtoverlay the Device is selectabel in Audio settings but no Sound when playing a file.
Tried this with different versions of LE and also OE, all with the same result.
There is no dtparam=audio=on in my config.txt to edit.
What i have added to config.txt is this
dtoverlay=iqaudio-dacplus
dtparam=i2s=on
Here is the KODI.log
Greetings
-
According to the IQaudio guide Raspberry Pi Audio - IQaudIO Limited you have to add the unmute_amp or auto_mute_amp options to the dtoverlay line (see page 5)
so long,
Hias
-
Thanks Hias,
now its playing great.
Reading the whole manual would be good idea next time,
i directly jumped to the OpenElec part.
