Early community images for H3, H6 and A64

**jernej** · Mar 23rd 2019

mr_d

that is normal serial output. But please test my update without that video=HDMI-A-1:[email protected]

mr_d · Mar 23rd 2019

jernej

with the new update and without that video=HDMI-A-1:[email protected]i get now also a picture.

Many thanks at all who helped to get a solution.

The config file is now changed from the original. Should I add something or should I use the original?

**jernej** · Mar 23rd 2019

mr_d

thanks for confirmation. Regarding config file, as you wish. If you plan to use serial console, you can leave it as it is. However, in any case I suggest that you remove drm.debug part if you still have it.

mr_d · Mar 23rd 2019

jernej

If it will not interfere with the function I leave it as is. So I can do debuging later, if it is necessary.

goosh · Mar 23rd 2019

Quote from mmad11

I launched on Orange Pi One Plus, but built-in ethernet card not working. External ethernet card worked wery liked! Mali 720 worked, but 1024x768

Could you please advise me on how did you manage to launch the update on Orange Pi One Plus? Thanks in adv.

mr_d · Mar 23rd 2019

goosh

You have to download the tar file, expand it, copy the 4 files into the folder "update" (smb share of libreelec) and do a reboot.

mr_d · Mar 23rd 2019

Next problem. The gui is visible but if I start playing a video from NAS i can hear the sound but I see no picture. I tried 1080p/24 and 1080i.

**jernej** · Mar 23rd 2019

mr_d

does it work from local storage?

mr_d · Mar 23rd 2019

jernej

the same from local storage. The title of the file and the clock is visible nothing else.

**jernej** · Mar 23rd 2019

mr_d can you upload sample video which will demonstrate the issue? which codec it needs?

mr_d · Mar 23rd 2019

jernej

one of the videos is a 1080i recording from a VU+ sat receiver. Nothing exotic.

Where should I upload bigger files like videos? I could try to cut a file to reduce size.

goosh · Mar 23rd 2019

Quote from mr_d

goosh

You have to download the tar file, expand it, copy the 4 files into the folder "update" (smb share of libreelec) and do a reboot.

Right, thanks. But how have you installed it in the first place (in order to get "update" folder)?

mr_d · Mar 23rd 2019

goosh

See here: Accessing LibreELEC [LibreELEC.wiki]

Libreelec should be up and runing.

goosh · Mar 23rd 2019

Quote from mr_d

goosh

See here: Accessing LibreELEC [LibreELEC.wiki]

Libreelec should be up and runing.

Sorry, where do I get an image for OrangePi One plus? Could see just Pine image.

**jernej** · Mar 23rd 2019

Quote from goosh

Sorry, where do I get an image for OrangePi One plus? Could see just Pine image.

There isn't one. Even if you use PineH64 image, half things will not work. With a bit of luck, I'll get OrangePi 3 soon. That one should be close enough to "transplant" changes in OrangePi One Plus image. Ping me in about a week or two.

mr_d I noticed that quick fix I used for monitor actually corrupts video playback. I guess it's time for a proper fix. I'll notify you when I have a proper solution. Just tell me which board you have because fix will be in a U-Boot.