Can't get LibreElec to load onto R-BOX Pro

1st Official Post

    I installed the image onto a 32gb micro SD using Rufus,

    powered down the box

    inserted Micro SD into slot on box

    held the reset button down and powered it on

    The R-Box Pro screen displays and just stays there.

    What am I doing wrong?

    Using 8.2.4.1

    Okay. switched around and used a USB port since the micro SD port isn't working for the sideload.

    I'm at the android recovery screen and can't seem to figure which to use.

    Menu says:

    Reboot system now

    Reboot to bootloader

    apply update from EXT

    apply update from cache

    apply update from ABD

    wipe data/factory reset

    wipe cache partition

    mount/system

    view recovery logs

    power off

    What is ABD?

    Apparently from what I ready from the last release saying that a new dbt wasn't need.

    I was using a micro SD USB adapter and trying all the dbt files and it would bring me up to the android recovery screen.

    so I pulled out the micro SD and shoved it in the card slot on the box, rebooted and Libre ELEC loaded up.

    Only issue now is I do not have any type of remote control or usb mouse to get through the setup.

    The DBT file I used was gxm_kvim2.dtb

    Got the remote to work.

    Copy and replaced the Remote.conf file with this one:

    remote.conf repository

    It matches the remote that came with my R-BOX Pro so I figured I give a try and Viola. works enough to get through the setup menu.

    I'll try and get some free time to play with LibreELEC later on and update.

    The micro SD card I am using if it matters is a UNIREX 32gb. supposedly with a 50mb max speed. Hopefully it doesn't cause me problems with playback.