Can't get LibreElec to load onto R-BOX Pro

I installed the image onto a 32gb micro SD using Rufus,

powered down the box

inserted Micro SD into slot on box

held the reset button down and powered it on

The R-Box Pro screen displays and just stays there.

What am I doing wrong?

Using 8.2.4.1

Okay. switched around and used a USB port since the micro SD port isn't working for the sideload.

I'm at the android recovery screen and can't seem to figure which to use.

Menu says:

Reboot system now

Reboot to bootloader

apply update from EXT

apply update from cache

apply update from ABD

wipe data/factory reset

wipe cache partition

mount/system

view recovery logs

power off

What is ABD?

I failed to note at the bottom of the screen it says

Api: 3

Recovery is listening abd sideload...

Waiting abd sideload command...

E: cannot load volume /misc!

Apparently from what I ready from the last release saying that a new dbt wasn't need.

I was using a micro SD USB adapter and trying all the dbt files and it would bring me up to the android recovery screen.

so I pulled out the micro SD and shoved it in the card slot on the box, rebooted and Libre ELEC loaded up.

Only issue now is I do not have any type of remote control or usb mouse to get through the setup.

The DBT file I used was gxm_kvim2.dtb

Got the remote to work.

Copy and replaced the Remote.conf file with this one:

remote.conf repository

It matches the remote that came with my R-BOX Pro so I figured I give a try and Viola. works enough to get through the setup menu.

I'll try and get some free time to play with LibreELEC later on and update.

The micro SD card I am using if it matters is a UNIREX 32gb. supposedly with a 50mb max speed. Hopefully it doesn't cause me problems with playback.