means your device can't get an IP address.
If your other devices can get an Ip address from the dhcp's router it means that my images doesn't support a x8-plus.
Your image supports my X8. I see no reason why it should not support an X8 Plus.
means your device can't get an IP address.
If your other devices can get an Ip address from the dhcp's router it means that my images doesn't support a x8-plus.
Your image supports my X8. I see no reason why it should not support an X8 Plus.
witch image do you have golden avatar maybe i trie that one
well i got the x8 x8h arm image and i boot with tootpic method then the following happen it says
invalid argument
fat,3.0.282015-05-16}
read -only file system
1.43.9 {8-feb-2018}
ext4:read-only file system while tryingto open /dev/...cblk8p2
write -protected;use the -n option to do a read- only
of the device.
fsck failed. your system is brokenbeyond repair
re-install libreelec
enter to shutdown now
could not read all the letters for the lines because my tv could not display them and i deblok the rar file tot trust so that is not the case someone got a solution for this
well i tried that but it wont work i think there is something corrupt in the image because i cant connect to the internet i tried a lot of versions but no luck maybe someone has an answer for my device
Display Morewell i got the x8 x8h arm image and i boot with tootpic method then the following happen it says
invalid argument
fat,3.0.282015-05-16}
read -only file system
1.43.9 {8-feb-2018}
ext4:read-only file system while tryingto open /dev/...cblk8p2
write -protected;use the -n option to do a read- only
of the device.
fsck failed. your system is brokenbeyond repair
re-install libreelec
enter to shutdown now
could not read all the letters for the lines because my tv could not display them and i deblok the rar file tot trust so that is not the case someone got a solution for this
you boot from SD?
does it decompress the image => format/write partition on the SD?
is your SD locked?
well i tried that but it wont work i think there is something corrupt in the image because i cant connect to the internet
No, there ist something wrong with Your network, maybe router isn´t configured properly or network-cable is broken.
Your box gets 169.x.x.x IP - network interface is working, but no connect to Your network.
You have to fix it.
no the cable is ok because if i boot in minix all works fine and yes i boot librelec from sd card that is not locked so it is a mirakel what happens here but it is something with the image
well got it running used an new sd card only problem is if i put kodi off i can not start it with power button so if i always let kodi on will it still update my movie addons automaticly or not
if i put kodi off i can not start it with power button
it a know problem
if i always let kodi on will it still update my movie addons automaticly or not
not sure but i guess it's a setting.
Anyway, as there's no more support for devices running linux 3.10 , someone has to compiled the addons new version .
(in my todo list but time is missing...)
well found a bug wen i push the stop button wen playing a movie all device freeze only thing i can do is put out the power plug and restart maybe there is a solution
well found a bug wen i push the stop button wen playing a movie all device freeze only thing i can do is put out the power plug and restart maybe there is a solution
I really don't think it's a bug. I suspect your 'bug' is related to the other problems you have been experiencing with your box.
My advice is to go back to the basics (that is, a working Android device) and restart from there.
- flash a working firmware on the internal memory of your Minix box (that could either be an official firmware (Android 4.4) or Finless Rom 1.0 (Android 5.1, and my recommendation).
(Minix XH8 - Finless Lollipop ROM 1.0 - FreakTab)
- once that is working properly, download datrhs final Libreelec 9 firmware for your device, unpack that file and burn the img file on a new or otherwise proven sd-card.
(Installation of LibreELEC [LibreELEC.wiki])
- patch the bootloader (to get dualboot)
(LibreELEC 9 / Kodi 18 for Minix X8,X8H,X8H+ and U1 (S905/X/D/W))
yes that is the best for me because its an old box i tried to get the stock firmware on it but if i connect the box by usb burning tool my pc doesnt see the box very frustrated but thanks for help i will try that finless rom you provided i come back with hopely a good result
yes that is the best for me because its an old box i tried to get the stock firmware on it but if i connect the box by usb burning tool my pc doesnt see the box very frustrated but thanks for help i will try that finless rom you provided i come back with hopely a good result
Do you use the USB on-the-go (OTG) cable that came with the Minix box? If not, are you at least using a USB cable that is capable of transferring data (recognizable by 4 instead of 2 tiny metal strips in the mini USB connector)?
Then follow the instructions at How to Use the Amlogic USB Burning Tool to Manually Update Firmware 2019.
well it workt i put the image finless rom on it that golden avator providet the link for ant it works well so i think i stay with this on this box because i think the box isnt good for librelec i better get a new box with a better cpu and put librelec on that box
well it workt i put the image finless rom on it that golden avator providet the link for ant it works well so i think i stay with this on this box because i think the box isnt good for librelec i better get a new box with a better cpu and put librelec on that box
LibreElec runs on your box. There's no harm in trying a dual boot with LibreElec on an SD-card.
woow... I had my Minix X8-H completely forgotten and now thanks to you I can it life again. I m wondering also if it works with UHD 4K.
I m managed to follow procedure and install libreelec directly in the main partition. Now I have question. When new updates will come out, will I get the updates directly from libreelec program addon, as I do in the raspberrypi or I need to do some manual procedure.
Can I for example just copy the target files in the update folder?
Minix X8-H
it's a "community" image so you will have to put the .tar or gz in the update folder.
Speaking about LibreELEC add-ons, i was using the wetek's one.(3.10)
Now that these devices aren't supported anymore, i will have to take care myself.
anybody with Minix X8-H and Libreelec playing 4K videos?
I just tried but they are far from smooth. I did not touch the settings but I don't think there much that can be done. I guess the X8-H is not really done for 4K, though they were advertising it as supporting 4k UHD videos