[SOLVED] Bluetooth MXIII

trogggy · August 21, 2016 at 3:31 PM

Quote from kszaq

What is result of ls /dev/ttyS??

Code

Beelink:~ # ls /dev/ttyS?
/dev/ttyS0  /dev/ttyS1

**kszaq** · August 21, 2016 at 3:53 PM

Please try this build, update only from 7.0.2.006!
2016-08-21-4K-RTLWiFi

WileCoyote · August 21, 2016 at 5:34 PM

Quote from kszaq

Please try this build, update only from 7.0.2.006!
2016-08-21-4K-RTLWiFi

Doesn't work for me I'm afraid

**kszaq** · August 21, 2016 at 5:57 PM

2nd try: 2016-08-21-4K-RTLWiFi-2

WileCoyote · August 21, 2016 at 6:08 PM

Quote from kszaq

2nd try: 2016-08-21-4K-RTLWiFi-2

Still nothing. Sorry.

dcervi · August 21, 2016 at 6:54 PM

Quote from kszaq

2nd try: 2016-08-21-4K-RTLWiFi-2

Hi kszaq,

Did you try enabling CONFIG_RFKILL_GPIO in kernel config, and adding OBDA8723 to the rfkill-gpio acpi list, as specified here ?

JonSnow · August 21, 2016 at 7:38 PM

if we want to go back to official 006 after these test builds do we just put the zip/tar in the upgrade folder?

**kszaq** · August 21, 2016 at 7:45 PM

Quote from JonSnow

if we want to go back to official 006 after these test builds do we just put the zip/tar in the upgrade folder?

Yes, simple upgrade in this case works. But I would prefer if you told me whether RAM management on devel version is any better or not.

JonSnow · August 21, 2016 at 7:57 PM

will try the second devel release.

EDIT

Bluetooth still not working, however RAM is better. With 006 after a few minutes i was able to use up about 49%, with the second devel I'm currently at 34% which is much better. I'm trying to keep my test conistant as possible. So w/e changes you made you are for sure on the right track.

**kszaq** · August 22, 2016 at 2:05 PM

Quote from dcervi

Did you try enabling CONFIG_RFKILL_GPIO in kernel config, and adding OBDA8723 to the rfkill-gpio acpi list, as specified here ?

Amlogic platform uses a different RFKILL driver and there's no need to enable this.

Can you try this with both dev versions (first one and second one if possible):

Code

echo 0 > /sys/class/rfkill/rfkill0/state && sleep 2 && echo 1 > /sys/class/rfkill/rfkill0/state && /usr/bin/rtk_hciattach -n -s 115200 /dev/ttyS1 rtk_h5

WileCoyote · August 22, 2016 at 4:47 PM

Quote from kszaq

Code

echo 0 > /sys/class/rfkill/rfkill0/state && sleep 2 && echo 1 > /sys/class/rfkill/rfkill0/state && /usr/bin/rtk_hciattach -n -s 115200 /dev/ttyS1 rtk_h5

For the second devel release:

Code

LibreELEC (community) Version: devel-20160821184509-r23281-gc0127b4
LibreELEC git: c0127b46cdfcf166217c7c05c1e3cb8e243241ff
LibreELEC:~ # echo 0 > /sys/class/rfkill/rfkill0/state && sleep 2 && echo 1 > /s
ys/class/rfkill/rfkill0/state && /usr/bin/rtk_hciattach -n -s 115200 /dev/ttyS1
rtk_h5
Realtek Bluetooth init uart with init speed:115200, final_speed:115200, type:HCI                               UART H5
Realtek Bluetooth :Realtek hciattach version 2.5


Realtek Bluetooth :3-wire sync pattern resend : 1, len: 8


Realtek Bluetooth :3-wire sync pattern resend : 2, len: 8


Realtek Bluetooth ERROR: h5 hdr checksum error!!!
Realtek Bluetooth :3-wire sync pattern resend : 3, len: 8


Realtek Bluetooth :3-wire sync pattern resend : 4, len: 8


Realtek Bluetooth :3-wire sync pattern resend : 5, len: 8


Realtek Bluetooth :3-wire sync pattern resend : 6, len: 8


Realtek Bluetooth ERROR: short h5 packet
Realtek Bluetooth :3-wire sync pattern resend : 7, len: 8


Realtek Bluetooth :3-wire sync pattern resend : 8, len: 8


Realtek Bluetooth :3-wire sync pattern resend : 9, len: 8


Realtek Bluetooth :3-wire sync pattern resend : 10, len: 8


Realtek Bluetooth :Get SYNC Pkt


Realtek Bluetooth :Get SYNC Resp Pkt


Realtek Bluetooth :3-wire config pattern resend : 1 , len: 10
Realtek Bluetooth :Get CONFG pkt-active mode


Realtek Bluetooth :Get CONFG resp pkt-active mode


Realtek Bluetooth :H5 init finished


Realtek Bluetooth :config offset(f4),length(8)
Realtek Bluetooth :config baud rate to :4928002, hwflowcontrol:5f, 1
Realtek Bluetooth :config offset(27),length(1)
Realtek Bluetooth :config offset(fe),length(1)
Realtek Bluetooth :config offset(15b),length(4)
Realtek Bluetooth :config offset(1e3),length(1)
Realtek Bluetooth :Get config baud rate from config file:4928002
Realtek Bluetooth :Load FW OK
Realtek Bluetooth :RTK send HCI_VENDOR_READ_RTK_ROM_VERISION_Command


Realtek Bluetooth :Received reliable seqno 0 from card
Realtek Bluetooth :receive hci command complete event with command:1001


Realtek Bluetooth :Read RTK LMP version with Status:0
Realtek Bluetooth :gLmpVersion = 0x8723
Realtek Bluetooth :RTK send HCI_VENDOR_READ_RTK_ROM_VERISION_Command


Realtek Bluetooth ERROR: short h5 packet
Realtek Bluetooth :RTK get HCI_VENDOR_READ_RTK_ROM_VERISION_Command


Realtek Bluetooth :rtk get eversion timerout, retry:0


Realtek Bluetooth ERROR: short h5 packet
Realtek Bluetooth :RTK get HCI_VENDOR_READ_RTK_ROM_VERISION_Command


Realtek Bluetooth :rtk get eversion timerout, retry:1


Realtek Bluetooth :RTK get HCI_VENDOR_READ_RTK_ROM_VERISION_Command


Realtek Bluetooth :rtk get eversion timerout, retry:2

Display More

And it just keeps on going with the retries.

**kszaq** · August 22, 2016 at 6:40 PM

Quote from WileCoyote

For the second devel release:

Thank you. Is it the same for the first test build? I'm asking as I don't have a device with 8723BS.

WileCoyote · August 22, 2016 at 7:16 PM

Quote from kszaq

Thank you. Is it the same for the first test build? I'm asking as I don't have a device with 8723BS.

First test build (I may have concatenated my pastings, but I'll leave as is):

Code

LibreELEC (community) Version: devel-20160821164516-r23280-g6f0336b
LibreELEC git: 6f0336b8b62ad538b5ca1f24b4c1f24346e3d0b4
LibreELEC:~ # echo 0 > /sys/class/rfkill/rfkill0/state && sleep 2 && echo 1 > /s
ys/class/rfkill/rfkill0/state && /usr/bin/rtk_hciattach -n -s 115200 /dev/ttyS1
rtk_h5
Realtek Bluetooth init uart with init speed:115200, final_speed:115200, type:HCI UART H5
Realtek Bluetooth :Realtek hciattach version 2.5


Realtek Bluetooth :3-wire sync pattern resend : 1, len: 8


Realtek Bluetooth :3-wire sync pattern resend : 2, len: 8


Realtek Bluetooth :Get SYNC Resp Pkt


Realtek Bluetooth :3-wire config pattern resend : 1 , len: 10
Realtek Bluetooth :Get SYNC pkt-active mode


Realtek Bluetooth :Get SYNC pkt-active mode


Realtek Bluetooth :Get CONFG pkt-active mode


Realtek Bluetooth :3-wire config pattern resend : 2 , len: 10
Realtek Bluetooth :Get CONFG resp pkt-active mode


Realtek Bluetooth :H5 init finished


Realtek Bluetooth :config offset(f4),length(8)
Realtek Bluetooth :config baud rate to :4928002, hwflowcontrol:5f, 1
Realtek Bluetooth :config offset(27),length(1)
Realtek Bluetooth :config offset(fe),length(1)
Realtek Bluetooth :config offset(15b),length(4)
Realtek Bluetooth :config offset(1e3),length(1)
Realtek Bluetooth :Get config baud rate from config file:4928002
Realtek Bluetooth :Load FW OK
Realtek Bluetooth :RTK send HCI_VENDOR_READ_RTK_ROM_VERISION_Command


Realtek Bluetooth :Received reliable seqno 0 from card
Realtek Bluetooth :receive hci command complete event with command:1001


Realtek Bluetooth :Read RTK LMP version with Status:0
Realtek Bluetooth :gLmpVersion = 0x8723
Realtek Bluetooth :RTK send HCI_VENDOR_READ_RTK_ROM_VERISION_Command


Realtek Bluetooth :Received reliable seqno 1 from card
Realtek Bluetooth :receive hci command complete event with command:fc6d


Realtek Bluetooth :Read RTK rom version with Status:0
Realtek Bluetooth :rtk_hw_cfg.eversion = 1
Realtek Bluetooth :rtk_get_fw_project_id: opcode 0, len 1, data 1
Realtek Bluetooth :fw_ver 0x1e3d5f61, patch_num 2
Realtek Bluetooth :patch length is 0x579c
Realtek Bluetooth [img]https://forum.libreelec.tv/images/smilies/confused.png[/img]tart offset is 0x4f00
Realtek Bluetooth :fw: exists, config file: exists
Realtek Bluetooth :baudrate in change speed command: 0x2 0x80 0x92 0x4


Realtek Bluetooth :Received reliable seqno 2 from card
Realtek Bluetooth :receive hci command complete event with command:fc17


Realtek Bluetooth :Change BD Rate with status:0
Realtek Bluetooth :final_speed 1500000


Realtek Bluetooth :hw flow control enable
Realtek Bluetooth :iEndIndex:89  iLastPacketLen:55 iAdditionpkt:3


Realtek Bluetooth :hci_download_patch tx_index:0 rx_index: -1


Realtek Bluetooth ERROR: patch timerout, retry:


Realtek Bluetooth :3-wire download patch re send:0
Realtek Bluetooth ERROR: patch timerout, retry:


Realtek Bluetooth :3-wire download patch re send:1
Realtek Bluetooth ERROR: patch timerout, retry:


Realtek Bluetooth :3-wire download patch re send:2
Realtek Bluetooth ERROR: patch timerout, retry:


Realtek Bluetooth :3-wire download patch re send:3
Realtek Bluetooth ERROR: patch timerout, retry:


Realtek Bluetooth :3-wire download patch re send:4
^C
LibreELEC:~ # LibreELEC (community) Version: devel-20160821164516-r23280-g6f0336
b
-sh: syntax error: unexpected word (expecting ")")
LibreELEC:~ # LibreELEC git: 6f0336b8b62ad538b5ca1f24b4c1f24346e3d0b4
-sh: LibreELEC: not found
LibreELEC:~ # LibreELEC:~ # echo 0 > /sys/class/rfkill/rfkill0/state && sleep 2
&& echo 1 > /s
-sh: LibreELEC:~: not found
LibreELEC:~ # ys/class/rfkill/rfkill0/state && /usr/bin/rtk_hciattach -n -s 1152
00 /dev/ttyS1
-sh: ys/class/rfkill/rfkill0/state: not found


Realtek Bluetooth ERROR: patch timerout, retry:


Realtek Bluetooth :3-wire download patch re send:0
Realtek Bluetooth ERROR: patch timerout, retry:


Realtek Bluetooth :3-wire download patch re send:1
Realtek Bluetooth ERROR: patch timerout, retry:


Realtek Bluetooth :3-wire download patch re send:2
Realtek Bluetooth ERROR: patch timerout, retry:


Realtek Bluetooth :3-wire download patch re send:3
Realtek Bluetooth ERROR: patch timerout, retry:


Realtek Bluetooth :3-wire download patch re send:4
LibreELEC:~ # rtk_h5
-sh: rtk_h5: not found
LibreELEC:~ # Realtek Bluetooth init uart with init speed:115200, final_speed:11
5200, type:HCI UART H5
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :Realtek hciattach version 2.5
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :3-wire sync pattern resend : 1, len: 8
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :3-wire sync pattern resend : 2, len: 8
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :Get SYNC Resp Pkt
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :3-wire config pattern resend : 1 , len: 10
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :Get SYNC pkt-active mode
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :Get SYNC pkt-active mode
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :Get CONFG pkt-active mode
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :3-wire config pattern resend : 2 , len: 10
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :Get CONFG resp pkt-active mode
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :H5 init finished
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :config offset(f4),length(8)
-sh: syntax error: unexpected "("
LibreELEC:~ # Realtek Bluetooth :config baud rate to :4928002, hwflowcontrol:5f,
 1
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :config offset(27),length(1)
-sh: syntax error: unexpected "("
LibreELEC:~ # Realtek Bluetooth :config offset(fe),length(1)
-sh: syntax error: unexpected "("
LibreELEC:~ # Realtek Bluetooth :config offset(15b),length(4)
-sh: syntax error: unexpected "("
LibreELEC:~ # Realtek Bluetooth :config offset(1e3),length(1)
-sh: syntax error: unexpected "("
LibreELEC:~ # Realtek Bluetooth :Get config baud rate from config file:4928002
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :Load FW OK
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :RTK send HCI_VENDOR_READ_RTK_ROM_VERISION_Comma
nd
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :Received reliable seqno 0 from card
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :receive hci command complete event with command
:1001
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :Read RTK LMP version with Status:0
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :gLmpVersion = 0x8723
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :RTK send HCI_VENDOR_READ_RTK_ROM_VERISION_Comma
nd
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :Received reliable seqno 1 from card
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :receive hci command complete event with command
:fc6d
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :Read RTK rom version with Status:0
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :rtk_hw_cfg.eversion = 1
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :rtk_get_fw_project_id: opcode 0, len 1, data 1
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :fw_ver 0x1e3d5f61, patch_num 2
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :patch length is 0x579c
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth [img]https://forum.libreelec.tv/images/smilies/confused.png[/img]tart offset is 0x4f00
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :fw: exists, config file: exists
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :baudrate in change speed command: 0x2 0x80 0x92
 0x4
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :Received reliable seqno 2 from card
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :receive hci command complete event with command
:fc17
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :Change BD Rate with status:0
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :final_speed 1500000
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :hw flow control enable
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth :iEndIndex:89  iLastPacketLen:55 iAdditionpkt:3
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :hci_download_patch tx_index:0 rx_index: -1
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth ERROR: patch timerout, retry:
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :3-wire download patch re send:0
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth ERROR: patch timerout, retry:
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :3-wire download patch re send:1
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth ERROR: patch timerout, retry:
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :3-wire download patch re send:2
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth ERROR: patch timerout, retry:
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :3-wire download patch re send:3
-sh: Realtek: not found
LibreELEC:~ # Realtek Bluetooth ERROR: patch timerout, retry:
-sh: Realtek: not found
LibreELEC:~ #
LibreELEC:~ # Realtek Bluetooth :3-wire download patch re send:4
-sh: Realtek: not found

Display More

WileCoyote · August 29, 2016 at 9:17 PM

Anything of interest in those logs kszaq?

**kszaq** · August 29, 2016 at 9:44 PM

They unfortunately don't give me any idea on how to make it work.

dcervi · August 29, 2016 at 10:03 PM

Kszaq, what BT firmware are you using for the driver?

I can see on lwfinger's github a new firmware uploaded a month ago that supposedly is working better for some users. Can you try making a test build with this firmware, please?

Enviat des del meu D5803 usant Tapatalk

JonSnow · August 30, 2016 at 12:03 AM

Anything else we can get you?
What usb BT dongle would you recommand instead?

I would be nice to use headphones during the night

**kszaq** · August 30, 2016 at 3:29 PM

Please try this build with Bluetooth firmware updated from MXIII's Android image: LibreELEC-S905.aarch64-7.0-devel-20160830160706-r23311-g51fe9ae.img.gz

[SOLVED] Bluetooth MXIII

Similar Threads

S802/S812-Libreelec images for 7/8/9