[SOLVED] Bluetooth MXIII


  • if we want to go back to official 006 after these test builds do we just put the zip/tar in the upgrade folder?

    Yes, simple upgrade in this case works. But I would prefer if you told me whether RAM management on devel version is any better or not.

  • will try the second devel release.

    EDIT

    Bluetooth still not working, however RAM is better. With 006 after a few minutes i was able to use up about 49%, with the second devel I'm currently at 34% which is much better. I'm trying to keep my test conistant as possible. So w/e changes you made you are for sure on the right track.

    Edited once, last by JonSnow (August 21, 2016 at 8:16 PM).


  • Did you try enabling CONFIG_RFKILL_GPIO in kernel config, and adding OBDA8723 to the rfkill-gpio acpi list, as specified here ?

    Amlogic platform uses a different RFKILL driver and there's no need to enable this.

    Can you try this with both dev versions (first one and second one if possible):

    Code
    echo 0 > /sys/class/rfkill/rfkill0/state && sleep 2 && echo 1 > /sys/class/rfkill/rfkill0/state && /usr/bin/rtk_hciattach -n -s 115200 /dev/ttyS1 rtk_h5

  • Code
    echo 0 > /sys/class/rfkill/rfkill0/state && sleep 2 && echo 1 > /sys/class/rfkill/rfkill0/state && /usr/bin/rtk_hciattach -n -s 115200 /dev/ttyS1 rtk_h5

    For the second devel release:

    And it just keeps on going with the retries.

    Edited once, last by WileCoyote (August 22, 2016 at 4:49 PM).

  • Thank you. Is it the same for the first test build? I'm asking as I don't have a device with 8723BS.

    First test build (I may have concatenated my pastings, but I'll leave as is):

    Edited once, last by WileCoyote (August 22, 2016 at 7:49 PM).

  • Kszaq, what BT firmware are you using for the driver?

    I can see on lwfinger's github a new firmware uploaded a month ago that supposedly is working better for some users. Can you try making a test build with this firmware, please?

    Enviat des del meu D5803 usant Tapatalk