v0.2?? Maybe v2.2?
Use this binary:
Releases · Portisch/u-boot · GitHub
In future the fixes will move to:
GitHub - CoreELEC/u-boot: U-Boot for Khadas
Wiki:
Remote power trouble
-
tyrol_gangster -
January 24, 2018 at 8:54 PM -
Thread is Unresolved
-
-
Display More
v0.2?? Maybe v2.2?
Use this binary:
Releases · Portisch/u-boot · GitHub
In future the fixes will move to:
GitHub - CoreELEC/u-boot: U-Boot for Khadas
Wiki:
Sounds interesting. What exactly fix this patch?
Is this applicable to all s912? I read the commit yesterday in CoreELEC github but I don’t know if is applicable to all s912.
If I compile last CoreELEC I will have cec fix?
Thanks
-
These fixes should apply to gxl/gxm (S905/S912) boards.
If you have one board where you have problems...
It will fix:
Enter suspend mode null reference crash
CEC crash and wakeup
On H96Pro+ board also the IR remote wakeup and the LEDs.
I do have a not branded H96Pro+ where nothing was working in u-boot.
-
v0.2?? Maybe v2.2?
My board is DDR4 v0.2!
I want to make another bootloader to make it work with other firmware (and fix some bags), since the standard bootloader only works on native firmware (x64 version)...
bootloader works corectly (on/off, suspend with red indicator) only on this firmware aml_7.1.2_s912_q9377-H96PROPLUS_mac-20171120.7z (Wisdom )
I would also like to find more information about the installed RAM chips (clk frequence, timing)...
I can be a beta tester, I need to correct the bootloader for my board, help me please
Screenshots of my board:
-
The release should already working:
u-boot_q201_v2.2_green_pcb.tar.gz
This is for DDR3/DDR4, Auto size and speed.
-
Hello
i had installed CoreELEC-S912.arm-8.95.3.img on my H96 Pro+ with a Black Mainboard.
Rename gxm_q200_3g.dtb to dtb.img
Installation was fine, but my remote do nothing. only 2 buttons work.
UP Button ---> Down in CoreELEC
Volume Up --> Shutdown System
any idea?
thx / regard
-
-
Works, thx. But I can't start the machine via remote. Power On doesn't work.
-
- Official Post
i had installed CoreELEC-S912.arm-8.95.3.img on my H96 Pro+ with a Black Mainboard.
You're asking questions to the wrong forum then. We stopped supporting their stuff when they fcuked off to do their own thing and stopped contributing to our codebase (not necessarily a bad thing).
-
Works, thx. But I can't start the machine via remote. Power On doesn't work.
You tried the new u-boot?
u-boot_q201_v5_v6_blue_pcb.tar.gz
See in the Wiki how to flash a new u-boot.
The risk to brick your device is on your side
-
thx. no, i dont had try it.
but, my board is black, not blue or green.
-
Blue/black... how cares. You have V6.1 and LPDDR3. So the u-boot_q201_v5_v6_blue_pcb.tar.gz should work.
-
ok, i will try it.
is this the right manual to install it?
Kodi is installed on my SD Card.
-
is this the right manual to install it?
Yes.
Also here are some information:
-
after a brick i will give it a new attempt.
is there a u-boot file available which i can install with USB BURNING TOOL or Burn_Card_Marker Tool ?
Download Amlogic USB Burning Tool v2.1.6 - China Gadgets Reviews
Download Amlogic Burn_Card_Maker v2.0.2 - China Gadgets Reviews
-
You find the u-boot files at the GitHub release. I used every time the method with the second bootable SD card.
-
I'll leave everything as it is. Hope that with a CoreElec update the bug is fixed. I do not want to break anything. -
You find the u-boot files at the GitHub release. I used every time the method with the second bootable SD card.
Hi! I have
- inject patched u-boot to firmware - u-boot_q201_v5_v6_blue_PCB.tar.gz1.38 MB
- burn it to my H96Pro+ by USB_Burning_Tool
- start Coreelec 8.95.4.2 from SD (was installed already)
- open SSH and enable full cec support - fw_setenv cecconfig cecf and reboot
- try to switch off the kodi by power off menu
- try to wake up by LG and Samsung TV also BUT I can't (((
P.S. wake up by IR remote works
P.P.S when I power off kodi - I can see that HDMI device switched from "kodi" to "MBox" than disappear.
Should I do something else?
