Kodi won‘t react to IR Remote after a while/some sleep cycles (since LE 8.2)

ApexDE · December 16, 2017 at 12:37 PM

Hi!

Maybe someone has a better/more comfortable idea to solve my issue:

Kodi stops reacting to IR commands after some hours of use, or after some system sleep cycles. I use a mce usb compatible USB Receiver which worked just fine since LE 8.2.

„irw“ on the console gives proper feedback and keypresses show just fine, when the problem occurs. I even tried to reload the mceusb kernel modul to no avail.

BUT: „systemctl restart kodi“ via ssh console brings back full remote functionality!

Any Ideas?

Thanks in advance

PS: Kodi Box is x86 64bit Intel based CoreDuo

**blueribb** · December 16, 2017 at 2:19 PM

Hardware ?

**HiassofT** · December 16, 2017 at 2:26 PM

please also post output of

Code

journalctl -a | paste

plus a kodi debug log after this has happened.

Ah, and make sure lirc is disabled in libreelec settings.

so long,

Hias

ApexDE · December 30, 2017 at 3:22 PM

Here is a log snippet when it happened again. No IR Control possible after sleep.

Code

Dez 30 08:17:34 LibreELEC kernel: Freezing user space processes ... (elapsed 0.001 seconds) done.
Dez 30 08:17:34 LibreELEC kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Dez 30 08:17:34 LibreELEC kernel: PM: Suspending system (mem)
Dez 30 08:17:34 LibreELEC kernel: Suspending console(s) (use no_console_suspend to debug)
Dez 30 08:17:34 LibreELEC kernel: mceusb 2-1:1.0: suspend
Dez 30 08:17:34 LibreELEC kernel: sd 2:0:1:0: [sdb] Synchronizing SCSI cache
Dez 30 08:17:34 LibreELEC kernel: sd 2:0:1:0: [sdb] Stopping disk
Dez 30 08:17:34 LibreELEC kernel: sd 2:0:0:0: [sda] Synchronizing SCSI cache
Dez 30 08:17:34 LibreELEC kernel: sd 2:0:0:0: [sda] Stopping disk
Dez 30 08:17:34 LibreELEC kernel: serial 00:02: disabled
Dez 30 08:17:34 LibreELEC kernel: PM: suspend of devices complete after 1519.271 msecs
Dez 30 08:17:34 LibreELEC kernel: PM: suspend devices took 1.520 seconds
Dez 30 08:17:34 LibreELEC kernel: PM: late suspend of devices complete after 0.356 msecs
Dez 30 08:17:34 LibreELEC kernel: pcieport 0000:00:1c.1: System wakeup enabled by ACPI
Dez 30 08:17:34 LibreELEC kernel: uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
Dez 30 08:17:34 LibreELEC kernel: uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
Dez 30 08:17:34 LibreELEC kernel: uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
Dez 30 08:17:34 LibreELEC kernel: uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
Dez 30 08:17:34 LibreELEC kernel: PM: noirq suspend of devices complete after 189.737 msecs
Dez 30 08:17:34 LibreELEC kernel: ACPI: Preparing to enter system sleep state S3
Dez 30 08:17:34 LibreELEC kernel: PM: Saving platform NVS memory
Dez 30 08:17:34 LibreELEC kernel: Disabling non-boot CPUs ...
Dez 30 08:17:34 LibreELEC kernel: smpboot: CPU 1 is now offline
Dez 30 08:17:34 LibreELEC kernel: ACPI: Low-level resume complete
Dez 30 08:17:34 LibreELEC kernel: PM: Restoring platform NVS memory
Dez 30 08:17:34 LibreELEC kernel: Suspended for 33741.934 seconds
Dez 30 08:17:34 LibreELEC kernel: Enabling non-boot CPUs ...
Dez 30 08:17:34 LibreELEC kernel: x86: Booting SMP configuration:
Dez 30 08:17:34 LibreELEC kernel: smpboot: Booting Node 0 Processor 1 APIC 0x1
Dez 30 08:17:34 LibreELEC kernel:  cache: parent cpu1 should not be sleeping
Dez 30 08:17:34 LibreELEC kernel: CPU1 is up
Dez 30 08:17:34 LibreELEC kernel: ACPI: Waking up from system sleep state S3
Dez 30 08:17:34 LibreELEC kernel: uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
Dez 30 08:17:34 LibreELEC kernel: uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
Dez 30 08:17:34 LibreELEC kernel: uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
Dez 30 08:17:34 LibreELEC kernel: uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
Dez 30 08:17:34 LibreELEC kernel: PM: noirq resume of devices complete after 206.743 msecs
Dez 30 08:17:34 LibreELEC kernel: PM: early resume of devices complete after 0.102 msecs
Dez 30 08:17:34 LibreELEC kernel: usb usb2: root hub lost power or was reset
Dez 30 08:17:34 LibreELEC kernel: usb usb3: root hub lost power or was reset
Dez 30 08:17:34 LibreELEC kernel: usb usb4: root hub lost power or was reset
Dez 30 08:17:34 LibreELEC kernel: usb usb5: root hub lost power or was reset
Dez 30 08:17:34 LibreELEC kernel: pcieport 0000:00:1c.1: System wakeup disabled by ACPI
Dez 30 08:17:34 LibreELEC kernel: rtc_cmos 00:01: System wakeup disabled by ACPI
Dez 30 08:17:34 LibreELEC kernel: serial 00:02: activated
Dez 30 08:17:34 LibreELEC kernel: sd 2:0:0:0: [sda] Starting disk
Dez 30 08:17:34 LibreELEC kernel: sd 2:0:1:0: [sdb] Starting disk
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: reset full-speed USB device number 2 using uhci_hcd
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: device descriptor read/64, error -71
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: device descriptor read/64, error -71
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: reset full-speed USB device number 2 using uhci_hcd
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: device descriptor read/64, error -71
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: device descriptor read/64, error -71
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: reset full-speed USB device number 2 using uhci_hcd
Dez 30 08:17:34 LibreELEC kernel: ata3.01: ACPI cmd ef/03:45:00:00:00:b0 (unknown) filtered out
Dez 30 08:17:34 LibreELEC kernel: ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 (unknown) filtered out
Dez 30 08:17:34 LibreELEC kernel: ata3.01: ACPI cmd c6/00:10:00:00:00:b0 (unknown) succeeded
Dez 30 08:17:34 LibreELEC kernel: ata3.01: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
Dez 30 08:17:34 LibreELEC kernel: ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (unknown) filtered out
Dez 30 08:17:34 LibreELEC kernel: ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (unknown) filtered out
Dez 30 08:17:34 LibreELEC kernel: ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (unknown) succeeded
Dez 30 08:17:34 LibreELEC kernel: ata3.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
Dez 30 08:17:34 LibreELEC kernel: ata3.00: configured for UDMA/133
Dez 30 08:17:34 LibreELEC kernel: ata3.01: configured for UDMA/133
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: device not accepting address 2, error -71
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: reset full-speed USB device number 2 using uhci_hcd
Dez 30 08:17:34 LibreELEC kernel: sky2 0000:03:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: device not accepting address 2, error -71
Dez 30 08:17:34 LibreELEC kernel: PM: resume of devices complete after 3052.996 msecs
Dez 30 08:17:34 LibreELEC kernel: PM: resume devices took 3.053 seconds
Dez 30 08:17:34 LibreELEC kernel: PM: Finishing wakeup.
Dez 30 08:17:34 LibreELEC kernel: Restarting tasks ... 
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: USB disconnect, device number 2
Dez 30 08:17:34 LibreELEC kernel: done.
Dez 30 08:17:34 LibreELEC systemd[1]: Time has been changed
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {RX} 29686211 packets 2250718364 bytes
Dez 30 08:17:34 LibreELEC systemd[1]: Started /bin/sh /storage/.kodi/addons/service.webgrabplus/bin/webgrabplus.run.
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {TX} 1310945 packets 129157181 bytes
Dez 30 08:17:34 LibreELEC systemd-sleep[7960]: System resumed.
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {update} flags 36867 <UP>
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {newlink} index 2 address 00:01:6C:58:4C:74 mtu 1500
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {RX} 29686211 packets 2250718364 bytes
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {TX} 1310945 packets 129157181 bytes
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {newlink} index 2 address 00:01:6C:58:4C:74 mtu 1500
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {newlink} index 2 operstate 6 <UP>
Dez 30 08:17:34 LibreELEC connmand[318]: Skipping disconnect of carrier, network is connecting.
Dez 30 08:17:34 LibreELEC avahi-daemon[343]: Withdrawing address record for 192.168.178.19 on eth0.
Dez 30 08:17:34 LibreELEC avahi-daemon[343]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.178.19.
Dez 30 08:17:34 LibreELEC avahi-daemon[343]: Interface eth0.IPv4 no longer relevant for mDNS.
Dez 30 08:17:34 LibreELEC avahi-daemon[343]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.178.19.
Dez 30 08:17:34 LibreELEC avahi-daemon[343]: New relevant interface eth0.IPv4 for mDNS.
Dez 30 08:17:34 LibreELEC avahi-daemon[343]: Registering new address record for 192.168.178.19 on eth0.IPv4.
Dez 30 08:17:34 LibreELEC connmand[318]: ipconfig state 3 ipconfig method 1
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {del} route 0.0.0.0 gw 192.168.178.1 scope 0 <UNIVERSE>
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {del} route 192.168.178.1 gw 0.0.0.0 scope 253 <LINK>
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {del} address 192.168.178.19/24 label eth0
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {del} route 192.168.178.0 gw 0.0.0.0 scope 253 <LINK>
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {add} address 192.168.178.19/24 label eth0 family 2
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {add} route 192.168.178.0 gw 0.0.0.0 scope 253 <LINK>
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {add} route 192.168.178.1 gw 0.0.0.0 scope 253 <LINK>
Dez 30 08:17:34 LibreELEC connmand[318]: eth0 {add} route 0.0.0.0 gw 192.168.178.1 scope 0 <UNIVERSE>
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: new full-speed USB device number 3 using uhci_hcd
Dez 30 08:17:34 LibreELEC Boot[8079]: ### running sleep script 99-suspend-modules.sh (post)... ###
Dez 30 08:17:34 LibreELEC Boot[8082]: ### running sleep script 20-custom-sleep.sh (post)... ###
Dez 30 08:17:34 LibreELEC sh[8047]: User defined pre-processing
Dez 30 08:17:34 LibreELEC sh[8047]: Nothing to do
Dez 30 08:17:34 LibreELEC Boot[8089]: ### running sleep script 10-addon-sleep.sh (post)... ###
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: device descriptor read/64, error -71
Dez 30 08:17:34 LibreELEC Boot[8096]: ### running addon sleep script /storage/.kodi/addons/service.tvheadend42/sleep.d/tvheadend.power (post)... ###
Dez 30 08:17:34 LibreELEC xorg-launch[565]: [dix] couldn't enable device 8
Dez 30 08:17:34 LibreELEC systemd[1]: Started TVHeadend42 Service.
Dez 30 08:17:34 LibreELEC systemd[1]: Started Suspend.
Dez 30 08:17:34 LibreELEC systemd[1]: sleep.target: Unit not needed anymore. Stopping.
Dez 30 08:17:34 LibreELEC systemd[1]: Stopped target Sleep.
Dez 30 08:17:34 LibreELEC systemd[1]: intel-fullrange-resume.service: Unit not needed anymore. Stopping.
Dez 30 08:17:34 LibreELEC systemd[1]: kodi-lirc-suspend.service: Unit not needed anymore. Stopping.
Dez 30 08:17:34 LibreELEC systemd[1]: Stopping LIRC sleep hook...
Dez 30 08:17:34 LibreELEC systemd[1]: Stopping Restore full range after suspend...
Dez 30 08:17:34 LibreELEC systemd[1]: Reached target Suspend.
Dez 30 08:17:34 LibreELEC systemd-logind[276]: Operation 'sleep' finished.
Dez 30 08:17:34 LibreELEC systemd[1]: suspend.target: Unit is bound to inactive unit systemd-suspend.service. Stopping, too.
Dez 30 08:17:34 LibreELEC systemd[1]: Stopped target Suspend.
Dez 30 08:17:34 LibreELEC systemd[1]: Stopped Restore full range after suspend.
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: device descriptor read/64, error -71
Dez 30 08:17:34 LibreELEC kodi-send[8112]: Sending action: LIRC.Start
Dez 30 08:17:34 LibreELEC systemd[1]: Stopped LIRC sleep hook.
Dez 30 08:17:34 LibreELEC sh[8047]:              WebGrab+Plus/w MDB & REX Postprocess -- version  V1.57
Dez 30 08:17:34 LibreELEC sh[8047]:                                 Jan van Straaten
Dez 30 08:17:34 LibreELEC sh[8047]:                              Francis De Paemeleere
Dez 30 08:17:34 LibreELEC sh[8047]:             thanks to Paul Weterings and all the contributing users
Dez 30 08:17:34 LibreELEC sh[8047]: --------------------------------------------------------------------------------
Dez 30 08:17:34 LibreELEC sh[8047]: WebGrab+Plus  V1.57
Dez 30 08:17:34 LibreELEC sh[8047]: Usage: WebGrab+Plus [OPTIONS...] [CONFIG_FOLDER]
Dez 30 08:17:34 LibreELEC sh[8047]: OPTIONS:
Dez 30 08:17:34 LibreELEC sh[8047]: CONFIG_FOLDER:
Dez 30 08:17:34 LibreELEC sh[8047]:   This is the absolute path to the configuration folder.
Dez 30 08:17:34 LibreELEC sh[8047]:   The configuration folder must contain at least a WebGrab++.config.xml file.
Dez 30 08:17:34 LibreELEC kernel: usb 2-1: new full-speed USB device number 4 using uhci_hcd
Dez 30 08:17:35 LibreELEC sh[8047]: Job started at 30/12/2017 08:17:34
Dez 30 08:17:35 LibreELEC kernel: usb 2-1: device descriptor read/64, error -71
Dez 30 08:17:35 LibreELEC connmand[318]: ntp: adjust (jump): +0.777161 sec
Dez 30 08:17:36 LibreELEC systemd[1]: Time has been changed
Dez 30 08:17:36 LibreELEC connmand[318]: eth0 {add} route 212.227.81.55 gw 192.168.178.1 scope 0 <UNIVERSE>
Dez 30 08:17:36 LibreELEC kernel: usb 2-1: device descriptor read/64, error -71
Dez 30 08:17:36 LibreELEC connmand[318]: eth0 {del} route 212.227.81.55 gw 192.168.178.1 scope 0 <UNIVERSE>
Dez 30 08:17:36 LibreELEC connmand[318]: ntp: adjust (jump): -0.478336 sec
Dez 30 08:17:35 LibreELEC systemd[1]: Time has been changed
Dez 30 08:17:35 LibreELEC sh[8047]: found: siteini.pack/Germany/tvtv.de.ini -- Revision 09
Dez 30 08:17:35 LibreELEC sh[8047]: timezone=UTC+01:00 mapped with timezone_id "Europe/Paris"
Dez 30 08:17:35 LibreELEC sh[8047]: found: siteini.pack/Germany/tvinfo.de.ini -- Revision 06
Dez 30 08:17:35 LibreELEC kernel: usb 2-1: new full-speed USB device number 5 using uhci_hcd
Dez 30 08:17:36 LibreELEC tvheadend[8110]: main: Log started
Dez 30 08:17:36 LibreELEC tvheadend[8110]: http: Starting HTTP server 0.0.0.0:9981
Dez 30 08:17:36 LibreELEC tvheadend[8110]: htsp: Starting HTSP server 0.0.0.0:9982
Dez 30 08:17:36 LibreELEC tvheadend[8110]: config: loaded
Dez 30 08:17:36 LibreELEC tvheadend[8110]: config: scanfile (re)initialization with path <none>
Dez 30 08:17:36 LibreELEC tvheadend[8110]: dvr: Creating new configuration ''
Dez 30 08:17:36 LibreELEC tvheadend[8110]: descrambler: adding CAID 2600 as constant crypto-word (BISS)
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epggrab: module eit created
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epggrab: module uk_freesat created
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epggrab: module uk_freeview created
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epggrab: module nz_freeview created
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epggrab: module viasat_baltic created
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epggrab: module Bulsatcom_39E created
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epggrab: module psip created
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epggrab: module opentv-ausat created
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epggrab: module opentv-skyuk created
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epggrab: module opentv-skynz created
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epggrab: module opentv-skyit created
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epggrab: module pyepg created
Dez 30 08:17:36 LibreELEC kernel: usb 2-1: device not accepting address 5, error -71
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epggrab: module xmltv created
Dez 30 08:17:36 LibreELEC tvheadend[8110]: spawn: Executing "/storage/.kodi/addons/service.tvheadend42/bin/tv_grab_file"
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epggrab: module /storage/.kodi/addons/service.tvheadend42/bin/tv_grab_file created
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epgdb: gzip format detected, inflating (ratio 24.5% deflated size 3997091)
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epgdb: parsing 16312330 bytes
Dez 30 08:17:36 LibreELEC kernel: usb 2-1: new full-speed USB device number 6 using uhci_hcd
Dez 30 08:17:36 LibreELEC nmbd[448]: [2017/12/30 08:17:36.609989,  0] ../source3/nmbd/nmbd_namequery.c:109(query_name_response)
Dez 30 08:17:36 LibreELEC nmbd[448]:   query_name_response: Multiple (2) responses received for a query on subnet 192.168.178.19 for name WORKGROUP<1d>.
Dez 30 08:17:36 LibreELEC nmbd[448]:   This response was from IP 192.168.178.1, reporting an IP address of 192.168.178.1.
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epgdb: loaded v2
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epgdb:   config     1
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epgdb:   brands     0
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epgdb:   seasons    0
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epgdb:   episodes   12018
Dez 30 08:17:36 LibreELEC tvheadend[8110]: epgdb:   broadcasts 11660
Dez 30 08:17:36 LibreELEC tvheadend[8110]: dvr: unable to stat file '/storage/recordings/SpiegelTV/SpiegelTV-2017-06-18-22_05-RTL2017-06-1822-05-1.ts'
Dez 30 08:17:36 LibreELEC tvheadend[8110]: dvr: unable to stat file '/storage/recordings/SpiegelTV/SpiegelTV-2017-06-18-22_05-RTL2017-06-1822-05-2.ts'
Dez 30 08:17:36 LibreELEC tvheadend[8110]: dvr: unable to stat file '/storage/recordings/SpiegelTV/SpiegelTV-2017-06-18-22_05-RTL2017-06-1822-05.ts'
Dez 30 08:17:36 LibreELEC tvheadend[8110]: dvr: failed to add inotify watch to /storage/recordings/SpiegelTV (err=No such file or directory)
Dez 30 08:17:36 LibreELEC tvheadend[8110]: dvr: failed to add inotify watch to /storage/recordings/SpiegelTV (err=No such file or directory)
Dez 30 08:17:36 LibreELEC tvheadend[8110]: dvr: failed to add inotify watch to /storage/recordings/SpiegelTV (err=No such file or directory)
Dez 30 08:17:36 LibreELEC kernel: usb 2-1: device not accepting address 6, error -71
Dez 30 08:17:36 LibreELEC kernel: usb usb2-port1: unable to enumerate USB device
Dez 30 08:17:36 LibreELEC tvheadend[8110]: dvr: delete entry f9710e65f6b0c262e5bb4b9f3a58d8b8 "Hessenschau-2017-12-30-19:29" on "HR" start time 1514658540, scheduled for recording by "127.0.0.1" (duplicate with f9710e65f6b0c262e5bb4b9f3a58d8b8)
Dez 30 08:17:37 LibreELEC tvheadend[8110]: START: HTS Tvheadend version 4.2.3-20 ~ LibreELEC Tvh-addon v8.2.112 started, running as PID:8110 UID:0 GID:39, CWD:/ CNF:/storage/.kodi/userdata/addon_data/service.tvheadend42
Dez 30 08:17:37 LibreELEC tvheadend[8110]: htsp: Got connection from 192.168.178.19
Dez 30 08:17:37 LibreELEC tvheadend[8110]: htsp: 192.168.178.19: Welcomed client software: Kodi Media Center (HTSPv25)
Dez 30 08:17:37 LibreELEC tvheadend[8110]: htsp: 192.168.178.19 [ Kodi Media Center ]: Identified as user ''
Dez 30 08:17:37 LibreELEC tvheadend[8110]: scanfile: DVB-S - loaded 1 regions with 112 networks
Dez 30 08:17:37 LibreELEC tvheadend[8110]: scanfile: DVB-T - loaded 44 regions with 1112 networks
Dez 30 08:17:37 LibreELEC tvheadend[8110]: scanfile: DVB-C - loaded 17 regions with 57 networks
Dez 30 08:17:37 LibreELEC tvheadend[8110]: scanfile: ATSC-T - loaded 2 regions with 11 networks
Dez 30 08:17:37 LibreELEC tvheadend[8110]: scanfile: ATSC-C - loaded 1 regions with 5 networks
Dez 30 08:17:37 LibreELEC tvheadend[8110]: scanfile: ISDB-T - loaded 2 regions with 1297 networks
Dez 30 08:17:40 LibreELEC sh[8047]: processing /storage/downloads/guide_wgp.xml ...
Dez 30 08:17:40 LibreELEC sh[8047]: Could find existing channel (xmltv_id=3sat) in the config file
Dez 30 08:17:40 LibreELEC sh[8047]: Could find existing channel (xmltv_id=ZDFneo) in the config file
Dez 30 08:17:40 LibreELEC sh[8047]: Could find existing channel (xmltv_id=ZDF) in the config file
Dez 30 08:17:40 LibreELEC sh[8047]: Could find existing channel (xmltv_id=ZDFinfo) in the config file
Dez 30 08:17:40 LibreELEC sh[8047]: Could find existing channel (xmltv_id=Phoenix) in the config file
Dez 30 08:17:40 LibreELEC sh[8047]: Could find existing channel (xmltv_id=KiKa) in the config file
Dez 30 08:17:40 LibreELEC sh[8047]: Could find existing channel (xmltv_id=arte) in the config file
Dez 30 08:17:40 LibreELEC sh[8047]: Could find existing channel (xmltv_id=ARD - Das Erste) in the config file
Dez 30 08:17:40 LibreELEC sh[8047]: Could find existing channel (xmltv_id=HR) in the config file
Dez 30 08:17:40 LibreELEC sh[8047]: Could find existing channel (xmltv_id=ONE) in the config file
Dez 30 08:17:40 LibreELEC sh[8047]: Could find existing channel (xmltv_id=SR) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=Sat1) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=RTL) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=Pro7) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=Kabel1) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=RTL Nitro) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=VOX) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=tagesschau24) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=WDR) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=BR) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=NDR) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=SWR) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=MDR) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=RBB) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=n-tv) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=sixx) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=RTL2) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=ProSieben MAXX) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=SRTL) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=Kabel1-Doku) in the config file
Dez 30 08:17:41 LibreELEC sh[8047]: Could find existing channel (xmltv_id=RTLplus) in the config file
Dez 30 08:17:43 LibreELEC sh[8047]: .................................
Dez 30 08:17:43 LibreELEC sh[8047]:       i=index  .=same  c=change  g=gab  r=replace  n=new
Dez 30 08:17:43 LibreELEC sh[8047]: Group (0) :
Dez 30 08:17:43 LibreELEC sh[8047]: update requested for - 31 - out of - 31 - channels for 14 day(s)
Dez 30 08:17:43 LibreELEC sh[8047]: (   1/31  ) TVTV.DE -- chan. (xmltv_id=3sat) -- mode Smart
Dez 30 08:18:22 LibreELEC crond[295]: time disparity of 563 minutes detected

Display More

**HiassofT** · December 30, 2017 at 3:40 PM

Please don't cut down logs, always upload full logs to a paste site (eg using the "paste" command in LE).

There are quite a lot of USB errors in the snippet you posted, but without having the full log it's impossible to know if they are related to your USB IR receiver or not.

If irw is showing button presses after resume but you don't get them in kodi you could also try disabling the kodi-lirc-suspend systemd service and see if this helps:

Code

systemctl mask kodi-lirc-suspend.service

If it didn't help or made things worse use "unmask" instead of "mask" in the above command to re-enable it again.

so long,

Hias

ApexDE · April 16, 2018 at 9:02 AM

I just noticed that LE 8.2.5 is out including MCE remote fixes.

I‘ll test the new release and report back