Hi i have tried installing the latest version of LibreElec but when it boots into kodi the screen just flickers and freezes the pc. older versions worked ok. Any help would be great, Thanks
Hi i have tried installing the latest version of LibreElec
-
waferteer -
October 29, 2017 at 12:55 PM -
Thread is Unresolved
-
-
- Official Post
It's hard to comment without any information on the hardware you're using (including the GPU type, which is probably pertinent). Most times when people claim their box is frozen the OS is running fine and there is some other reason that graphics didn't start. If you know the IP address of the box try logging in and running "dmesg | paste" so we can see something about the boot.
-
Hi chewitt. This is the spec of the media pc. Processor
AMD Athlon™ II Dual Core K325
NVIDIA® nForce® 9200 Chipset,
Memory
2GB DDR3 RAM
2 x SODIMM slot
Hard Drive
250GB SATA
Optical Drive
None
Graphics
NVIDIA® GeForce® 9200 Graphics
Networking
WLAN: 802.11 B/G/N
Interfaces Front
Two USB 2.0 ports
Headphone and microphone-in jack
Back
Two USB 2.0 ports
DC-in jack
Audio - S/PDIF out port (S/PDIF digital audio output port)
HDMI™ port with HDCP support
External display (VGA) port
Ethernet (RJ-45) port -
- Official Post
The nvidia 340.xx legacy driver we embed should support the GeForce 9200 but it wouldn't be the first time that something on the edge of the driver support list doesn't work; i.e. really old cards that are on the trailing edge of the list.
SSH into the box and run "dmesg | paste" and "cat /var/log/Xorg.0.log | paste" and share the URL(s) here.
-
Sorry i dont understand what to do m8.i can install your software but not great with pc's
-
- Official Post
accessing_libreelec [LibreELEC] connect to your LE box via ssh
BUT I am not sure that will work at all as no ssh is enabled per default at LE.
Afaik the Geforce 9200 is too old and is not supported anymore at the Nivida drivers.
have a look here
-
Thanks for all the help i have downloaded a build so will give it a go
