Geniatech HDStar DVB-S2 support for Raspberry pi

giga · December 11, 2016 at 10:56 AM

Hello,
Is there any Geniatech HDStar DVB-S2 support for Raspberry pi ithink the Ver 3 have a problem i dont know but i am tried many things but with fail i saw that there is one success here but for another device so is there any chance to make this tuner works
thanks

**CvH** · December 11, 2016 at 9:21 PM Official Post

it should be supported (also pls check our current alpha (7.90.009) )

if not pls dmesg | paste

zramth · December 20, 2016 at 3:27 AM

Quote from CvH

it should be supported (also pls check our current alpha (7.90.009) )

if not pls dmesg | paste

Hello CvH,

I tried the 7.90.009 with Geniatech HDStar V3 , but not working. (still recognised as V1 or V2 I think)
I want to know should I replace the ds3000.fw with ds300x.fw ? Cause I found the ds300X.fw md5 is match with V3 which listed by LinuxTV.

How to replace the firmware? The system is read only. I remember setup a folder and copy ds300x.fw into it ? I tried but still failed.

Could you please specify the detail steps ?

Thank you !

**CvH** · December 20, 2016 at 7:56 PM Official Post

create an the folder in /storage/.config/firmware (or via network share) an place your fw there + reboot

snailboy1 · December 21, 2016 at 12:01 AM

I've received mine with the same issues.

this thread has some info Anyone Using Geniatech Hdstar DVB-S2 help with LED Status?

this is a silly question, but - when i install libreelec, i burn the img.gz to sd/usb
what to do with .tar, as in the openelec link in that thread? - i'll be able to test if at least the adapter works or not and if it is software related by using that pre-built image.

i just tried the firmware copy/rename as above, with cvh 7.0.2, but hasn't worked
[hr]

Code

lsusb -v


Bus 001 Device 004: ID 1f4d:3000 G-Tek Electronics Group
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x1f4d G-Tek Electronics Group
  idProduct          0x3000
  bcdDevice            0.00
  iManufacturer           1 DVB-S/S2 USB Box
  iProduct                2 DVB-S/S2 USB Box
  iSerial                 3 080616
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          219
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 Default
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x13f2  3x 1010 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       2
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x12d6  3x 726 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       3
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x12ae  3x 686 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       4
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x03ca  1x 970 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       5
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x02ac  1x 684 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       6
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x03ac  1x 940 bytes
        bInterval               1
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0000
  (Bus Powered)

Display More

Code

LibreELECpi3dvb:~ # dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.13 (cvh@cvh-buildbox) (gcc version 5.3.0 (GCC) ) #1 SMP Sun Oct 2 12:30:15 CEST 2016
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] cma: Reserved 8 MiB at 0x2e400000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 192512
[    0.000000] free_area_init_node: node 0, pgdat 809298c0, node_mem_map add64000
[    0.000000]   Normal zone: 1692 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 192512 pages, LIFO batch:31
[    0.000000] [bcm2709_smp_init_cpus] enter (94c0->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 12 pages/cpu @aefae000 s17292 r8192 d23668 u49152
[    0.000000] pcpu-alloc: s17292 r8192 d23668 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 190820
[    0.000000] Kernel command line: root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img usbcore.autosuspend=-1 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa02082 bcm2709.serial=0x7d5b388f smsc95xx.macaddr=B8:27:EB:5B:38:8F bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 744204K/770048K available (5459K kernel code, 202K rwdata, 1432K rodata, 2260K init, 396K bss, 17652K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xaf800000 - 0xff800000   (1280 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xaf000000   ( 752 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x806c2ffc   (6892 kB)
[    0.000000]       .init : 0x806c3000 - 0x808f8000   (2260 kB)
[    0.000000]       .data : 0x808f8000 - 0x8092a998   ( 203 kB)
[    0.000000]        .bss : 0x8092d000 - 0x80990054   ( 397 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000023] Switching to timer-based delay loop, resolution 52ns
[    0.000200] Console: colour dummy device 80x30
[    0.000374] console [tty0] enabled
[    0.000394] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
[    0.000409] pid_max: default: 32768 minimum: 301
[    0.000532] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000545] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001350] Disabling cpuset control group subsystem
[    0.001377] Initializing cgroup subsys io
[    0.001403] Initializing cgroup subsys memory
[    0.001435] Initializing cgroup subsys devices
[    0.001449] Initializing cgroup subsys freezer
[    0.001476] CPU: Testing write buffer coherency: ok
[    0.001905] CPU0: update cpu_capacity 1024
[    0.001916] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001925] [bcm2709_smp_prepare_cpus] enter
[    0.002010] Setting up static identity map for 0x8280 - 0x82b4
[    0.003501] [bcm2709_boot_secondary] cpu:1 started (0) 17
[    0.003715] [bcm2709_secondary_init] enter cpu:1
[    0.003750] CPU1: update cpu_capacity 1024
[    0.003756] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.004111] [bcm2709_boot_secondary] cpu:2 started (0) 18
[    0.004261] [bcm2709_secondary_init] enter cpu:2
[    0.004280] CPU2: update cpu_capacity 1024
[    0.004285] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.004625] [bcm2709_boot_secondary] cpu:3 started (0) 16
[    0.004763] [bcm2709_secondary_init] enter cpu:3
[    0.004781] CPU3: update cpu_capacity 1024
[    0.004787] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.004844] Brought up 4 CPUs
[    0.004865] SMP: Total of 4 processors activated (153.00 BogoMIPS).
[    0.004872] CPU: All CPU(s) started in HYP mode.
[    0.004879] CPU: Virtualization extensions available.
[    0.005303] devtmpfs: initialized
[    0.014320] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.014511] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.015011] pinctrl core: initialized pinctrl subsystem
[    0.015519] NET: Registered protocol family 16
[    0.020627] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.030002] cpuidle: using governor ladder
[    0.040022] cpuidle: using governor menu
[    0.044480] Serial: AMBA PL011 UART driver
[    0.044600] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.044744] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.088557] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[    0.089002] SCSI subsystem initialized
[    0.089315] usbcore: registered new interface driver usbfs
[    0.089395] usbcore: registered new interface driver hub
[    0.089480] usbcore: registered new device driver usb
[    0.090230] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-06-20 18:18
[    0.117250] clocksource: Switched to clocksource arch_sys_counter
[    0.125363] NET: Registered protocol family 2
[    0.126032] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.126158] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.126345] TCP: Hash tables configured (established 8192 bind 8192)
[    0.126437] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.126483] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.126702] NET: Registered protocol family 1
[    0.126969] RPC: Registered named UNIX socket transport module.
[    0.126978] RPC: Registered udp transport module.
[    0.126985] RPC: Registered tcp transport module.
[    0.126993] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.272105] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.285361] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.287020] NFS: Registering the id_resolver key type
[    0.287069] Key type id_resolver registered
[    0.287078] Key type id_legacy registered
[    0.287103] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.290424] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.290444] io scheduler noop registered (default)
[    0.290461] io scheduler deadline registered
[    0.290499] io scheduler cfq registered
[    0.292842] BCM2708FB: allocated DMA memory ee800000
[    0.292866] BCM2708FB: allocated DMA channel 0 @ f3007000
[    0.297924] Console: switching to colour frame buffer device 82x26
[    1.237701] bcm2835-rng 3f104000.rng: hwrng registered
[    1.237843] vc-cma: Videocore CMA driver
[    1.237853] vc-cma: vc_cma_base      = 0x00000000
[    1.237861] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.237869] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.238040] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    1.249657] brd: module loaded
[    1.249790] loop: module loaded
[    1.251775] nbd: registered device at major 43
[    1.259441] vchiq: vchiq_init_state: slot_zero = 0xae880000, is_master = 0
[    1.260894] usbcore: registered new interface driver rtsx_usb
[    1.260910] Loading iSCSI transport class v2.0-870.
[    1.261290] iscsi: registered transport (tcp)
[    1.261548] tun: Universal TUN/TAP device driver, 1.6
[    1.261557] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.261804] usbcore: registered new interface driver dm9601
[    1.261896] usbcore: registered new interface driver smsc95xx
[    1.261960] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.462202] Core Release: 2.80a
[    1.462214] Setting default values for core params
[    1.462241] Finished setting default values for core params
[    1.662584] Using Buffer DMA mode
[    1.662593] Periodic Transfer Interrupt Enhancement - disabled
[    1.662601] Multiprocessor Interrupt Enhancement - disabled
[    1.662609] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.662626] Dedicated Tx FIFOs mode
[    1.662882] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xae814000 dma = 0xee814000 len=9024
[    1.662910] FIQ FSM acceleration enabled for :
[    1.662910] Non-periodic Split Transactions
[    1.662910] Periodic Split Transactions
[    1.662910] High-Speed Isochronous Endpoints
[    1.662910] Interrupt/Control Split Transaction hack enabled
[    1.662931] dwc_otg: Microframe scheduler enabled
[    1.662972] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x803d4d44
[    1.662984] WARN::hcd_init_fiq:414: FIQ ASM at 0x803d50a8 length 36
[    1.662997] WARN::hcd_init_fiq:439: MPHI regs_base at 0xaf92e000
[    1.663051] dwc_otg 3f980000.usb: DWC OTG Controller
[    1.663094] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    1.663125] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    1.663173] Init: Port Power? op_state=1
[    1.663180] Init: Power Port (0)
[    1.663342] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.663356] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.663367] usb usb1: Product: DWC OTG Controller
[    1.663378] usb usb1: Manufacturer: Linux 4.4.13 dwc_otg_hcd
[    1.663389] usb usb1: SerialNumber: 3f980000.usb
[    1.663995] hub 1-0:1.0: USB hub found
[    1.664035] hub 1-0:1.0: 1 port detected
[    1.664401] dwc_otg: FIQ enabled
[    1.664409] dwc_otg: NAK holdoff enabled
[    1.664416] dwc_otg: FIQ split-transaction FSM enabled
[    1.664445] Module dwc_common_port init
[    1.664615] usbcore: registered new interface driver uas
[    1.664740] usbcore: registered new interface driver usb-storage
[    1.664911] mousedev: PS/2 mouse device common for all mice
[    1.665037] i2c /dev entries driver
[    1.665978] bcm2835-cpufreq: min=600000 max=1200000
[    1.667720] sdhci: Secure Digital Host Controller Interface driver
[    1.667724] sdhci: Copyright(c) Pierre Ossman
[    1.667872] sdhost: log_buf @ ae813000 (ee813000)
[    1.733929] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    1.735947] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    1.735953] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    1.780623] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.780793] ledtrig-cpu: registered to indicate activity on CPUs
[    1.780862] hidraw: raw HID events driver (C) Jiri Kosina
[    1.781962] usbcore: registered new interface driver usbhid
[    1.781966] usbhid: USB HID core driver
[    1.782844] NET: Registered protocol family 10
[    1.783255] NET: Registered protocol family 17
[    1.783309] Key type dns_resolver registered
[    1.783553] Registering SWP/SWPB emulation handler
[    1.783884] vc-sm: Videocore shared memory driver
[    1.783891] [vc_sm_connected_init]: start
[    1.784129] [vc_sm_connected_init]: end - returning 0
[    1.785270] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    1.785407] console [netcon0] enabled
[    1.785411] netconsole: network logging started
[    1.785420] of_cfs_init
[    1.785459] of_cfs_init: OK
[    1.787454] Freeing unused kernel memory: 2260K (806c3000 - 808f8000)
[    1.787552] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.789521] mmc0: new high speed SDHC card at address 59b4
[    1.790809] mmcblk0: mmc0:59b4 USD   15.0 GiB
[    1.791971]  mmcblk0: p1 p2
[    1.809163] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.810680] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.812210] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.814934] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.863977] Indeed it is in host mode hprt0 = 00021501
[    1.900928] mmc1: new high speed SDIO card at address 0001
[    2.030626] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.030759] Indeed it is in host mode hprt0 = 00001101
[    2.210840] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    2.210858] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.211484] hub 1-1:1.0: USB hub found
[    2.211575] hub 1-1:1.0: 5 ports detected
[    2.490616] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.584155] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.584169] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.586739] smsc95xx v1.0.4
[    2.630199] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:38:8f
[    2.867275] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
[    2.961218] usb 1-1.3: New USB device found, idVendor=1f4d, idProduct=3000
[    2.961233] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.961244] usb 1-1.3: Product: DVB-S/S2 USB Box
[    2.961255] usb 1-1.3: Manufacturer: DVB-S/S2 USB Box
[    2.961266] usb 1-1.3: SerialNumber: 080616
[    3.160612] usb 1-1.4: new full-speed USB device number 5 using dwc_otg
[    3.265098] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=3451
[    3.265113] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.265124] usb 1-1.4: Product: Airmouse
[    3.265135] usb 1-1.4: Manufacturer: AliTV Remote V1
[    3.273265] input: AliTV Remote V1 Airmouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0C45:3451.0001/input/input0
[    3.324824] hid-generic 0003:0C45:3451.0001: input,hidraw0: USB HID v1.01 Keyboard [AliTV Remote V1 Airmouse] on usb-3f980000.usb-1.4/input0
[    3.328531] input: AliTV Remote V1 Airmouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:0C45:3451.0002/input/input1
[    3.328930] hid-generic 0003:0C45:3451.0002: input,hidraw1: USB HID v1.01 Mouse [AliTV Remote V1 Airmouse] on usb-3f980000.usb-1.4/input1
[    3.333390] hid-generic 0003:0C45:3451.0003: hiddev0,hidraw2: USB HID v1.10 Device [AliTV Remote V1 Airmouse] on usb-3f980000.usb-1.4/input2
[    3.339081] input: AliTV Remote V1 Airmouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.3/0003:0C45:3451.0004/input/input2
[    3.339554] hid-generic 0003:0C45:3451.0004: input,hidraw3: USB HID v1.01 Gamepad [AliTV Remote V1 Airmouse] on usb-3f980000.usb-1.4/input3
[    3.715753] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    3.716520] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    3.791565] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.353471] systemd[1]: System time before build time, advancing clock.
[    4.357630] random: systemd urandom read with 110 bits of entropy available
[    4.368564] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    4.369154] systemd[1]: Detected architecture arm.
[    4.369603] systemd[1]: Set hostname to <LibreELEC>.
[    4.525694] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.621866] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.622112] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.622461] systemd[1]: Listening on Journal Socket.
[    4.622717] systemd[1]: Listening on udev Control Socket.
[    4.622804] systemd[1]: Reached target Paths.
[    4.624132] systemd[1]: Created slice User and Session Slice.
[    4.624319] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.624476] systemd[1]: Listening on udev Kernel Socket.
[    4.624920] systemd[1]: Created slice System Slice.
[    4.625040] systemd[1]: Reached target Slices.
[    4.641115] systemd[1]: Starting Load Kernel Modules...
[    4.643602] systemd[1]: Starting Setup machine-id...
[    4.647127] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.650125] systemd[1]: Starting Show Version...
[    4.653698] systemd[1]: Mounting Temporary Directory...
[    4.656718] systemd[1]: Starting Mounting swapfile...
[    4.659970] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.663397] systemd[1]: Mounting POSIX Message Queue File System...
[    4.667051] systemd[1]: Mounting Debug File System...
[    4.670137] systemd[1]: Mounting Variable Directory...
[    4.677055] systemd[1]: Started Load Kernel Modules.
[    4.678068] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    4.681313] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.684280] systemd[1]: Mounting Configuration File System...
[    4.687294] systemd[1]: Starting Apply Kernel Variables...
[    4.696630] systemd[1]: Started Remount Root and Kernel File Systems.
[    4.705727] systemd[1]: Starting udev Coldplug all Devices...
[    4.801929] systemd[1]: Started Apply Kernel Variables.
[    4.853343] systemd[1]: Mounted Debug File System.
[    4.853678] systemd[1]: Mounted Configuration File System.
[    4.853896] systemd[1]: Mounted POSIX Message Queue File System.
[    4.854203] systemd[1]: Mounted Variable Directory.
[    4.854438] systemd[1]: Mounted Temporary Directory.
[    4.875147] systemd[1]: Started Show Version.
[    4.878259] systemd[1]: Started Create Static Device Nodes in /dev.
[    4.879574] systemd[1]: Started Setup machine-id.
[    4.883066] random: nonblocking pool is initialized
[    4.970095] systemd[1]: Started Mounting swapfile.
[    5.100014] systemd[1]: Started udev Coldplug all Devices.
[    5.252816] systemd[1]: Reached target Swap.
[    5.271078] systemd[1]: Starting Journal Service...
[    5.271201] systemd[1]: Reached target Local File Systems (Pre).
[    5.273774] systemd[1]: Starting Setup Timezone data...
[    5.274014] systemd[1]: Reached target Local File Systems.
[    5.305229] systemd[1]: Started Setup Timezone data.
[    5.360306] systemd[1]: Started Journal Service.
[    5.429657] systemd-journald[217]: Received request to flush runtime journal from PID 1
[    6.305482] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    6.312637] Console: switching to colour dummy device 80x30
[    6.493425] cfg80211: World regulatory domain updated:
[    6.493443] cfg80211:  DFS Master region: unset
[    6.493449] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    6.493456] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    6.493463] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    6.493469] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    6.493476] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    6.493485] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    6.493491] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    6.493497] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    6.493503] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    6.507775] media: Linux media interface: v0.10
[    6.509796] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    6.610983] WARNING: You are using an experimental version of the media stack.
[    6.610983]  As the driver is backported to an older kernel, it doesn't offer
[    6.610983]  enough quality for its usage in production.
[    6.610983]  Use it with care.
[    6.610983] Latest git patches (needed if you report a bug to [email protected]):
[    6.610983]  c3b809834db8b1a8891c7ff873a216eac119628d [media] pulse8-cec: fix compiler warning
[    6.610983]  34b27b13a2cd43e0d27e3ce13b96119efbbbedbc [media] pxa_camera: merge soc_mediabus.c into pxa_camera.c
[    6.610983]  8a5a2ba86ab8fc12267fea974b9cd730ad2dee24 [media] v4l: vsp1: Add R8A7792 VSP1V support
[    6.694949] WARNING: You are using an experimental version of the media stack.
[    6.694949]  As the driver is backported to an older kernel, it doesn't offer
[    6.694949]  enough quality for its usage in production.
[    6.694949]  Use it with care.
[    6.694949] Latest git patches (needed if you report a bug to [email protected]):
[    6.694949]  c3b809834db8b1a8891c7ff873a216eac119628d [media] pulse8-cec: fix compiler warning
[    6.694949]  34b27b13a2cd43e0d27e3ce13b96119efbbbedbc [media] pxa_camera: merge soc_mediabus.c into pxa_camera.c
[    6.694949]  8a5a2ba86ab8fc12267fea974b9cd730ad2dee24 [media] v4l: vsp1: Add R8A7792 VSP1V support
[    6.747403] usbcore: registered new interface driver brcmfmac
[    6.795572] dw2102: su3000_identify_state
[    6.795588] dvb-usb: found a 'SU3000HD DVB-S USB2.0' in warm state.
[    6.795603] dw2102: su3000_power_ctrl: 1, initialized 0
[    6.796223] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    6.796364] DVB: registering new adapter (SU3000HD DVB-S USB2.0)
[    6.796379] usb 1-1.3: media controller created
[    6.800847] dvb-usb: MAC address: 00:af:78:66:69:86
[    6.801822] dvb_create_media_entity: media entity 'dvb-demux' registered.
[    7.009206] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
[    7.033242] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[    7.136205] DS3000 chip version: 0.208 attached.
[    7.209555] ts2020 3-0060: Montage Technology TS2022 successfully identified
[    7.209596] dw2102: Attached DS3000/TS2020!
[    7.209617] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Montage Technology DS3000)...
[    7.209649] dvb_create_media_entity: media entity 'Montage Technology DS3000' registered.
[    7.247359] Registered IR keymap rc-su3000
[    7.247848] input: IR-receiver inside an USB DVB receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0/input3
[    7.248083] rc rc0: IR-receiver inside an USB DVB receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0
[    7.248097] dvb-usb: schedule remote query interval to 150 msecs.
[    7.248113] dw2102: su3000_power_ctrl: 0, initialized 1
[    7.248122] dvb-usb: SU3000HD DVB-S USB2.0 successfully initialized and connected.
[    7.248254] usbcore: registered new interface driver dw2102
[    7.489185] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    7.489559] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.752034] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
[    7.752057] brcmfmac: brcmf_add_if: ignore IF event
[    7.756623] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    7.756645] brcmfmac: power management disabled
[    7.880524] uart-pl011 3f201000.uart: no DMA platform data
[    8.705458] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    8.723221] cfg80211: Regulatory domain changed to country: GB
[    8.723240] cfg80211:  DFS Master region: ETSI
[    8.723248] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    8.723262] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.723275] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    8.723290] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    8.723302] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[    8.723313] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[    8.964841] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.973627] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[    8.988946] 8021q: 802.1Q VLAN Support v1.8
[   10.493088] dw2102: su3000_power_ctrl: 1, initialized 1
[   10.498210] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[   10.503060] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[   11.555453] usb 1-1.3: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
[   11.558466] dw2102: su3000_power_ctrl: 0, initialized 1
[   12.270521] Bluetooth: Core ver 2.21
[   12.270576] NET: Registered protocol family 31
[   12.270581] Bluetooth: HCI device and connection manager initialized
[   12.270593] Bluetooth: HCI socket layer initialized
[   12.270601] Bluetooth: L2CAP socket layer initialized
[   12.270618] Bluetooth: SCO socket layer initialized
[   12.285836] Bluetooth: HCI UART driver ver 2.3
[   12.285852] Bluetooth: HCI UART protocol H4 registered
[   12.285857] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   12.285966] Bluetooth: HCI UART protocol BCM registered
[  105.386069] TCP: request_sock_TCP: Possible SYN flooding on port 9981. Dropping request.  Check SNMP counters.
[  230.403594] dw2102: su3000_power_ctrl: 1, initialized 1
[  230.411727] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[  230.411882] ds3000_firmware_ondemand: Waiting for firmware upload(2)...

Display More

note - this is after swapping the .fw around

--

edited:
i've updated to 7.9 - not sure if it rectifies the .fw i swapped earlier, but it does the same thing.
I can see the signal bar sometimes go up and down.

on the ones I can see a signal, i get >

Code

2016-12-21 01:31:52.565 linuxdvb: Montage Technology DS3000 : DVB-S #0 - poll TIMEOUT2016-12-21 01:31:53.443 linuxdvb: Montage Technology DS3000 : DVB-S #0 - retune nodata

here cvh commented OpenELEC Mediacenter - OpenELEC Forum - OE 6.95.3 with Geniatech HDSTAR V3 patch. (1/1)

zramth · December 21, 2016 at 3:06 AM

Quote from CvH

create an the folder in /storage/.config/firmware (or via network share) an place your fw there + reboot

Hello CvH,

I created an folder /storage/.config/firmware,place dvb-fe-ds300X.fw into it and renamed to dvb-fe-ds3000.fw , then reboot .

7.90.009 with Geniatech HDStar V3

dmesg | grep dvb
[ 6.486861] dvb-usb: found a 'SU3000HD DVB-S USB2.0' in warm state.
[ 6.487597] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 6.494388] dvb-usb: MAC address: 00:af:78:68:3a:21
[ 6.960669] dvb-usb: schedule remote query interval to 150 msecs.
[ 6.960687] dvb-usb: SU3000HD DVB-S USB2.0 successfully initialized and connected.
[ 11.046515] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[ 12.139517] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...

lsusb
Bus 001 Device 004: ID 1f4d:3000 G-Tek Electronics Group
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Still no signal like before

snailboy1 · December 21, 2016 at 4:11 PM

Hi,

try this OpenELEC Mediacenter - OpenELEC Forum - OE 6.95.3 with Geniatech HDSTAR V3 patch. (1/1)

install openelec, then update with that one.

i'm scanning now - found no channels BUT i'm seeing good SNR etc when it tunes in. so something works better..

CvH, i just sent some beer tokens

if you PM me, i will send you one of these HDStar dvb-s2 v3 adapters for free if you have a satellite to test it on. or anyone else if theyhave the skills to make this work.

some info here >

External Content gist.github.com

Content embedded from external sources will not be displayed without your consent.

Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

LibreELEC afl intergrated with amilogic build but i don't have this particular hardware

Openelec build from the link i posted earlier, with apparent patch for v3 HDstar >

Code

login as: root
[email protected]'s password:
##############################################
#                  OpenELEC                  #
#             http://openelec.tv             #
##############################################


OpenELEC (community) Version: 6.95.3
OpenELEC:~ # dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.8 (root@PlexMediaServer) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Jul 23 09:54:28 CEST 2016
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] cma: Reserved 8 MiB at 0x2e400000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 192512
[    0.000000] free_area_init_node: node 0, pgdat 80949800, node_mem_map add64000
[    0.000000]   Normal zone: 1692 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 192512 pages, LIFO batch:31
[    0.000000] [bcm2709_smp_init_cpus] enter (94c0->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 12 pages/cpu @aefaf000 s17292 r8192 d23668 u49152
[    0.000000] pcpu-alloc: s17292 r8192 d23668 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 190820
[    0.000000] Kernel command line: root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img usbcore.autosuspend=-1 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa02082 bcm2709.serial=0x7d5b388f smsc95xx.macaddr=B8:27:EB:5B:38:8F bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 744080K/770048K available (5459K kernel code, 202K rwdata, 1428K rodata, 2392K init, 396K bss, 17776K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xaf800000 - 0xff800000   (1280 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xaf000000   ( 752 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x806c1ffc   (6888 kB)
[    0.000000]       .init : 0x806c2000 - 0x80918000   (2392 kB)
[    0.000000]       .data : 0x80918000 - 0x8094a8d8   ( 203 kB)
[    0.000000]        .bss : 0x8094d000 - 0x809b0054   ( 397 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000023] Switching to timer-based delay loop, resolution 52ns
[    0.000192] Console: colour dummy device 80x30
[    0.000370] console [tty0] enabled
[    0.000395] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
[    0.000412] pid_max: default: 32768 minimum: 301
[    0.000535] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000547] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001357] Disabling cpuset control group subsystem
[    0.001384] Initializing cgroup subsys io
[    0.001408] Initializing cgroup subsys memory
[    0.001439] Initializing cgroup subsys devices
[    0.001455] Initializing cgroup subsys freezer
[    0.001480] CPU: Testing write buffer coherency: ok
[    0.001901] CPU0: update cpu_capacity 1024
[    0.001912] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001922] [bcm2709_smp_prepare_cpus] enter
[    0.002007] Setting up static identity map for 0x8280 - 0x82b4
[    0.003507] [bcm2709_boot_secondary] cpu:1 started (0) 18
[    0.003722] [bcm2709_secondary_init] enter cpu:1
[    0.003758] CPU1: update cpu_capacity 1024
[    0.003764] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.004118] [bcm2709_boot_secondary] cpu:2 started (0) 17
[    0.004268] [bcm2709_secondary_init] enter cpu:2
[    0.004287] CPU2: update cpu_capacity 1024
[    0.004293] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.004630] [bcm2709_boot_secondary] cpu:3 started (0) 15
[    0.004769] [bcm2709_secondary_init] enter cpu:3
[    0.004787] CPU3: update cpu_capacity 1024
[    0.004793] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.004850] Brought up 4 CPUs
[    0.004872] SMP: Total of 4 processors activated (153.00 BogoMIPS).
[    0.004879] CPU: All CPU(s) started in HYP mode.
[    0.004886] CPU: Virtualization extensions available.
[    0.005313] devtmpfs: initialized
[    0.013995] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.014171] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.014674] pinctrl core: initialized pinctrl subsystem
[    0.015187] NET: Registered protocol family 16
[    0.020303] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.030019] cpuidle: using governor ladder
[    0.040037] cpuidle: using governor menu
[    0.044295] bcm2709: Mini UART enabled
[    0.044440] Serial: AMBA PL011 UART driver
[    0.044560] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.044704] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.087649] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[    0.088769] SCSI subsystem initialized
[    0.089071] usbcore: registered new interface driver usbfs
[    0.089150] usbcore: registered new interface driver hub
[    0.089234] usbcore: registered new device driver usb
[    0.090241] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-04-27 11:10
[    0.117254] clocksource: Switched to clocksource arch_sys_counter
[    0.125372] NET: Registered protocol family 2
[    0.126039] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.126155] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.126343] TCP: Hash tables configured (established 8192 bind 8192)
[    0.126432] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.126477] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.126693] NET: Registered protocol family 1
[    0.126967] RPC: Registered named UNIX socket transport module.
[    0.126977] RPC: Registered udp transport module.
[    0.126984] RPC: Registered tcp transport module.
[    0.126992] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.277281] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.290472] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.292146] NFS: Registering the id_resolver key type
[    0.292186] Key type id_resolver registered
[    0.292195] Key type id_legacy registered
[    0.292219] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.295442] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.295463] io scheduler noop registered (default)
[    0.295479] io scheduler deadline registered
[    0.295517] io scheduler cfq registered
[    0.297859] BCM2708FB: allocated DMA memory ee800000
[    0.297900] BCM2708FB: allocated DMA channel 0 @ f3007000
[    0.302943] Console: switching to colour frame buffer device 82x26
[    0.306033] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.306821] 3f215040.uart: ttyS0 at MMIO 0x3f215040 (irq = 59, base_baud = 50000000) is a 16550
[    1.249985] bcm2835-rng 3f104000.rng: hwrng registered
[    1.250127] vc-cma: Videocore CMA driver
[    1.250137] vc-cma: vc_cma_base      = 0x00000000
[    1.250145] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.250153] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.250319] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    1.261967] brd: module loaded
[    1.262100] loop: module loaded
[    1.264120] nbd: registered device at major 43
[    1.271816] vchiq: vchiq_init_state: slot_zero = 0xae880000, is_master = 0
[    1.273279] usbcore: registered new interface driver rtsx_usb
[    1.273301] Loading iSCSI transport class v2.0-870.
[    1.273677] iscsi: registered transport (tcp)
[    1.273976] tun: Universal TUN/TAP device driver, 1.6
[    1.273985] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.274230] usbcore: registered new interface driver dm9601
[    1.274322] usbcore: registered new interface driver smsc95xx
[    1.274386] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.474625] Core Release: 2.80a
[    1.474637] Setting default values for core params
[    1.474664] Finished setting default values for core params
[    1.675002] Using Buffer DMA mode
[    1.675012] Periodic Transfer Interrupt Enhancement - disabled
[    1.675019] Multiprocessor Interrupt Enhancement - disabled
[    1.675028] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.675056] Dedicated Tx FIFOs mode
[    1.675350] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xae814000 dma = 0xee814000 len=9024
[    1.675379] FIQ FSM acceleration enabled for :
[    1.675379] Non-periodic Split Transactions
[    1.675379] Periodic Split Transactions
[    1.675379] High-Speed Isochronous Endpoints
[    1.675379] Interrupt/Control Split Transaction hack enabled
[    1.675401] dwc_otg: Microframe scheduler enabled
[    1.675442] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x803d46f0
[    1.675453] WARN::hcd_init_fiq:414: FIQ ASM at 0x803d4a54 length 36
[    1.675467] WARN::hcd_init_fiq:439: MPHI regs_base at 0xaf92e000
[    1.675520] dwc_otg 3f980000.usb: DWC OTG Controller
[    1.675555] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    1.675586] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    1.675633] Init: Port Power? op_state=1
[    1.675640] Init: Power Port (0)
[    1.675802] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.675816] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.675828] usb usb1: Product: DWC OTG Controller
[    1.675839] usb usb1: Manufacturer: Linux 4.4.8 dwc_otg_hcd
[    1.675850] usb usb1: SerialNumber: 3f980000.usb
[    1.676447] hub 1-0:1.0: USB hub found
[    1.676484] hub 1-0:1.0: 1 port detected
[    1.676838] dwc_otg: FIQ enabled
[    1.676846] dwc_otg: NAK holdoff enabled
[    1.676853] dwc_otg: FIQ split-transaction FSM enabled
[    1.676881] Module dwc_common_port init
[    1.677049] usbcore: registered new interface driver uas
[    1.677174] usbcore: registered new interface driver usb-storage
[    1.677368] mousedev: PS/2 mouse device common for all mice
[    1.677488] i2c /dev entries driver
[    1.678439] bcm2835-cpufreq: min=600000 max=1200000
[    1.680145] sdhci: Secure Digital Host Controller Interface driver
[    1.680149] sdhci: Copyright(c) Pierre Ossman
[    1.680298] sdhost: log_buf @ ae813000 (ee813000)
[    1.743911] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    1.745938] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    1.745944] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    1.790613] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.790779] ledtrig-cpu: registered to indicate activity on CPUs
[    1.790846] hidraw: raw HID events driver (C) Jiri Kosina
[    1.791951] usbcore: registered new interface driver usbhid
[    1.791955] usbhid: USB HID core driver
[    1.792828] NET: Registered protocol family 10
[    1.793229] NET: Registered protocol family 17
[    1.793283] Key type dns_resolver registered
[    1.793527] Registering SWP/SWPB emulation handler
[    1.793852] vc-sm: Videocore shared memory driver
[    1.793859] [vc_sm_connected_init]: start
[    1.794087] [vc_sm_connected_init]: end - returning 0
[    1.795213] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    1.795355] console [netcon0] enabled
[    1.795359] netconsole: network logging started
[    1.795367] of_cfs_init
[    1.795407] of_cfs_init: OK
[    1.797481] Freeing unused kernel memory: 2392K (806c2000 - 80918000)
[    1.797539] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.799514] mmc0: new high speed SDHC card at address 59b4
[    1.800746] mmcblk0: mmc0:59b4 USD   15.0 GiB
[    1.801645]  mmcblk0: p1 p2
[    1.820809] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.822354] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.823881] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.826634] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.873973] Indeed it is in host mode hprt0 = 00021501
[    1.912598] mmc1: new high speed SDIO card at address 0001
[    2.040614] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.040748] Indeed it is in host mode hprt0 = 00001101
[    2.220723] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    2.220734] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.221082] hub 1-1:1.0: USB hub found
[    2.221129] hub 1-1:1.0: 5 ports detected
[    2.500673] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.523959] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    2.524736] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    2.594194] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.594213] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.596893] smsc95xx v1.0.4
[    2.603206] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.640084] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:38:8f
[    2.877311] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
[    2.971286] usb 1-1.3: New USB device found, idVendor=1f4d, idProduct=3000
[    2.971308] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.971320] usb 1-1.3: Product: DVB-S/S2 USB Box
[    2.971331] usb 1-1.3: Manufacturer: DVB-S/S2 USB Box
[    2.971343] usb 1-1.3: SerialNumber: 080616
[    3.102426] systemd[1]: System time before build time, advancing clock.
[    3.106525] random: systemd urandom read with 73 bits of entropy available
[    3.122585] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    3.123110] systemd[1]: Detected architecture arm.
[    3.123310] systemd[1]: Running with unpopulated /etc.
[    3.123541] systemd[1]: Set hostname to <OpenELEC>.
[    3.123733] systemd[1]: Initializing machine ID from random generator.
[    3.247975] systemd[1]: Populated /etc with preset unit settings.
[    3.353342] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.353750] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.355061] systemd[1]: Created slice User and Session Slice.
[    3.355227] systemd[1]: Listening on udev Kernel Socket.
[    3.355647] systemd[1]: Created slice System Slice.
[    3.355975] systemd[1]: Reached target Slices.
[    3.356580] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.356775] systemd[1]: Listening on udev Control Socket.
[    3.356987] systemd[1]: Listening on Journal Socket.
[    3.374450] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.376930] systemd[1]: Mounting Temporary Directory...
[    3.383052] systemd[1]: Starting Load Kernel Modules...
[    3.385738] systemd[1]: Mounting POSIX Message Queue File System...
[    3.388825] systemd[1]: Starting Setup machine-id...
[    3.391734] systemd[1]: Mounting Variable Directory...
[    3.395006] systemd[1]: Starting Mounting swapfile...
[    3.398333] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.401309] systemd[1]: Mounting Debug File System...
[    3.401790] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.401972] systemd[1]: Reached target Paths.
[    3.404918] systemd[1]: Starting Show Version...
[    3.599908] systemd[1]: Mounted Debug File System.
[    3.600093] systemd[1]: Mounted POSIX Message Queue File System.
[    3.600209] systemd[1]: Mounted Variable Directory.
[    3.600326] systemd[1]: Mounted Temporary Directory.
[    3.601294] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.602543] systemd[1]: Started Load Kernel Modules.
[    3.603734] systemd[1]: Started Setup machine-id.
[    3.605401] systemd[1]: Started Remount Root and Kernel File Systems.
[    3.606866] systemd[1]: Started Show Version.
[    3.687387] systemd[1]: Started Mounting swapfile.
[    3.882775] systemd[1]: Reached target Swap.
[    3.897728] systemd[1]: Starting udev Coldplug all Devices...
[    3.900301] systemd[1]: Starting Journal Service...
[    3.903061] systemd[1]: Mounting Configuration File System...
[    3.906448] systemd[1]: Starting Apply Kernel Variables...
[    3.910542] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.914426] systemd[1]: Starting Setup Timezone data...
[    3.921083] systemd[1]: Mounted Configuration File System.
[    3.962560] systemd[1]: Started Setup Timezone data.
[    4.000535] systemd[1]: Started Apply Kernel Variables.
[    4.020839] systemd[1]: Started Create Static Device Nodes in /dev.
[    4.053672] systemd[1]: Started Journal Service.
[    4.214521] systemd-journald[198]: Received request to flush runtime journal from PID 1
[    4.701371] random: nonblocking pool is initialized
[    5.673406] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    5.687169] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    5.779805] cfg80211: World regulatory domain updated:
[    5.779826] cfg80211:  DFS Master region: unset
[    5.779832] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    5.779839] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    5.779846] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    5.779852] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    5.779858] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    5.779865] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    5.779870] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    5.779876] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    5.779882] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    5.914076] dw2102: su3000_identify_state
[    5.914076]
[    5.914089] dvb-usb: found a 'SU3000HD DVB-S USB2.0' in warm state.
[    5.914099] dw2102: su3000_power_ctrl: 1, initialized 0
[    5.914099]
[    5.914428] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    5.914527] DVB: registering new adapter (SU3000HD DVB-S USB2.0)
[    5.918475] dvb-usb: MAC address: 00:af:78:66:69:86
[    5.947107] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24
[    5.947658] usbcore: registered new interface driver brcmfmac
[    6.049623] Console: switching to colour dummy device 80x30
[    6.221052] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
[    6.239170] DS3000 chip version: 0.208 attached.
[    6.241244] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[    6.349287] ts2020 3-0060: Montage Technology TS2022 successfully identified
[    6.349316] dw2102: Attached DS3000/TS2020!
[    6.349316]
[    6.349329] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Montage Technology DS3000)...
[    6.378581] Registered IR keymap rc-su3000
[    6.378854] input: IR-receiver inside an USB DVB receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0/input0
[    6.378996] rc0: IR-receiver inside an USB DVB receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0
[    6.379004] dvb-usb: schedule remote query interval to 150 msecs.
[    6.379016] dw2102: su3000_power_ctrl: 0, initialized 1
[    6.379016]
[    6.379022] dvb-usb: SU3000HD DVB-S USB2.0 successfully initialized and connected.
[    6.379097] usbcore: registered new interface driver dw2102
[    6.511486] uart-pl011 3f201000.uart: no DMA platform data
[    6.768503] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    6.768616] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.883508] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
[    6.883524] brcmfmac: brcmf_add_if: ignore IF event
[    6.887400] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.887419] brcmfmac: power management disabled
[    7.655945] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    7.658070] brcmfmac: brcmf_sdio_hdparse: seq 101: sequence number error, expect 100
[    7.658164] brcmfmac: brcmf_sdio_hdparse: seq 100: sequence number error, expect 102
[    7.658540] brcmfmac: brcmf_sdio_hdparse: seq 102: sequence number error, expect 101
[    7.674170] cfg80211: Regulatory domain changed to country: GB
[    7.674190] cfg80211:  DFS Master region: ETSI
[    7.674199] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    7.674212] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    7.674226] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    7.674239] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    7.674251] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[    7.674262] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[    8.315087] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.316486] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[    8.348997] 8021q: 802.1Q VLAN Support v1.8
[   10.117248] dw2102: su3000_power_ctrl: 1, initialized 1
[   10.117248]
[   10.124069] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[   10.138908] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[   11.003525] Bluetooth: Core ver 2.21
[   11.003575] NET: Registered protocol family 31
[   11.003580] Bluetooth: HCI device and connection manager initialized
[   11.003594] Bluetooth: HCI socket layer initialized
[   11.003602] Bluetooth: L2CAP socket layer initialized
[   11.003620] Bluetooth: SCO socket layer initialized
[   11.007153] Bluetooth: HCI UART driver ver 2.3
[   11.007167] Bluetooth: HCI UART protocol H4 registered
[   11.007172] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   11.007291] Bluetooth: HCI UART protocol BCM registered
[   11.191384] usb 1-1.3: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
[   11.195404] dw2102: su3000_power_ctrl: 0, initialized 1
[   11.195404]
[   11.195499] dw2102: su3000_power_ctrl: 1, initialized 1
[   11.195499]
[   11.203556] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[   11.203660] ds3000_firmware_ondemand: Waiting for firmware upload(2)...

Display More

Code

Bus 001 Device 004: ID 1f4d:3000 G-Tek Electronics Group
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x1f4d G-Tek Electronics Group
  idProduct          0x3000
  bcdDevice            0.00
  iManufacturer           1 DVB-S/S2 USB Box
  iProduct                2 DVB-S/S2 USB Box
  iSerial                 3 080616
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          219
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 Default
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x13f2  3x 1010 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       2
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x12d6  3x 726 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       3
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x12ae  3x 686 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       4
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x03ca  1x 970 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       5
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x02ac  1x 684 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       6
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x03ac  1x 940 bytes
        bInterval               1

Display More

Code

Module                  Size  Used by
hci_uart               14478  1
btbcm                   5379  1 hci_uart
bluetooth             282086  3 btbcm,hci_uart
8021q                  16074  0
rc_su3000                934  0
ts2020                  5416  1
regmap_i2c              2817  1 ts2020
ds3000                  9935  1
brcmfmac              172747  0
dvb_usb_dw2102         39542  10
dvb_usb                15019  1 dvb_usb_dw2102
brcmutil                4893  1 brcmfmac
rc_core                14740  4 dvb_usb,rc_su3000,dvb_usb_dw2102
cfg80211              229385  1 brcmfmac
dvb_core               75506  2 dvb_usb,dvb_usb_dw2102
bcm2835_gpiomem         2652  0
bcm2835_wdt             2777  0

Display More

snailboy1 · December 22, 2016 at 12:37 AM

Update:

AFL's patched version here LibreELEC

Works - i didn't realize my TX3 amlogic box was compatible. So the hardware is not completely dead..

just need on x86 and ARM (pi3) .. and not on beta builds. s905 none beta build would be a bonus too.

my offer to send one for free still stands if they can make it happen.

giga · January 2, 2017 at 11:53 PM

Quote from snailboy1

Update:

AFL's patched version here LibreELEC

Works - i didn't realize my TX3 amlogic box was compatible. So the hardware is not completely dead..

just need on x86 and ARM (pi3) .. and not on beta builds. s905 none beta build would be a bonus too.

my offer to send one for free still stands if they can make it happen.

So does it work with raspberry pi 3
[hr]

Quote from CvH

it should be supported (also pls check our current alpha (7.90.009) )

if not pls dmesg | paste

Still not working v3 need a spicial driver

Jefken · January 3, 2017 at 3:17 PM

Hello,

Anyone had risked to use this box with rotor (diseqc 1.2, usals) trough tvheadend, the manufacturer says it would damage the device...?

**CvH** · January 3, 2017 at 7:46 PM Official Post

Quote from giga

Still not working v3 need a spicial driver

for RPi2/3 I have a "special" image here LibreELEC-RPi2.arm-7.90.010-4.9.0-TBS-T230C-0.2.img.gz

should support the tuner (not too sure ofc)

giga · January 14, 2017 at 9:23 PM

Quote from CvH

for RPi2/3 I have a "special" image here LibreELEC-RPi2.arm-7.90.010-4.9.0-TBS-T230C-0.2.img.gz

should support the tuner (not too sure ofc)

Yes it's working ????
The system had some problem and freeze some time but it's working and there is a big delay on the channel switching
Thanks allot

**CvH** · January 15, 2017 at 10:46 AM Official Post

It should work with the Official LE 8.0 Beta1 and newer (if released).

giga · January 28, 2017 at 2:31 PM

Quote from CvH

It should work with the Official LE 8.0 Beta1 and newer (if released).

tested with the LibreELEC (Krypton) v7.95.1 BETA
but not working

if you don't mind you can tell me how to replace the driver on the img so i can do it myself
thanks

andiewill · January 28, 2017 at 2:56 PM

Quote from CvH

for RPi2/3 I have a "special" image here LibreELEC-RPi2.arm-7.90.010-4.9.0-TBS-T230C-0.2.img.gz

should support the tuner (not too sure ofc)

Just wondering if this image can be uploaded again...... trying desperatly to get my hdstar v3 working......

**CvH** · January 28, 2017 at 5:54 PM Official Post

Quote from giga

but not working

dmesg | paste

Quote from giga

if you don't mind you can tell me how to replace the driver on the img so i can do it myself

there is nothing you can add, there is not patch or something we could include and i still haven't seen a dmesg so i completely out of options

Quote from andiewill

Just wondering if this image can be uploaded again

official LE8 Beta1 has support for that (most likely), it uses the same driver as in the linked image

andiewill · January 29, 2017 at 6:51 PM

Thanks CVH, i got the HDstar dvb s2 pulling in services and channels with this version of libreElec, for some reason when i tried it previously two days ago, it could not pull in / detect the dvb s2 tuner, but now all is ok with this download, i did change my sd card so maybe that was the issue ? now i have a picture showing etc, anyway now to set it up and configure the raspberry Pi 3 like i want it ..... Cheers once again............

**CvH** · January 29, 2017 at 9:12 PM Official Post

no idea but if it works