Core2Udo , after "Reboot from internal" use "Reboot" button.
Posts by boot2k3
-
-
serjy, attach your rc_maps.cfg and your keymaps file to check what is wrong
-
The volume is cut off in the channels change in dolby.
Yes, I have the same problem.
I thought it's my avr, but not, the same problem on different avr too.
GDPR-2 is it possible to collect some logs for this issue? Or is it a question to kodi team?
The sound becomes quieter and and quieter after some time
-
autostart.sh should work, but it' be better to create a udev rule for that. Copy /utsr/lib/udev/rules.d/70-input-repeat.rules to /storage/.config/udev.rules.d, and then add this line at the end (all in a single line, after the LABEL="end" line):
CodeACTION=="add|change", KERNEL=="lirc*[0-9]", DRIVERS=="meson-ir", RUN+="/usr/bin/ir-ctl -d $devnode -t 50000"Thank you, HiassofT. Now my remote works almost beautiful with ir-ctl -t 33000
-
Yes and also HOME button does not work
Prevous with remote.conf file I could map all buttons in keymap editor app. And remote repeats is very bad now. Before it was working good . Now I adjusted it little bit but still sometimes "jumping"Did you assign this buttons as KEY_FAVORITES and KEY_HOME?
you can try to add only this buttons in Lircmap.xls as in my example LE9.0 remote configs ir-keytable Amlogic devices
-
This image is the first with that kernel.
The LE kernel uses a newer nougat source than the kszaq 8.2 one so I would not be surprised if this is true.
Just compiled S912 build from your last branch.
Looks like GUI became smoother.
IPTV and 4k video works good as in 8.90.4
-
Still the problem with CEC if I press shutdown button while looking for TV (PVR IPTV.Simple). My AVR doesn't go to standby and process take a lot of time.
I tried to add kodi-send --action "Stop" in shutdown.sh to stop working TV or video before shutdown, but it doesn't work.
As a working solution I assign a script on power button:
Bash#!/bin/sh kodi-send --action "Stop" kodi-send --action "Shutdown()"And now CEC works and shutdown process goes much faster.
GDPR-2, is it possible to add this action in the code to stop any video/PVR process before shutdown process starts?
-
What file system does it have?
Is it visible in windows/Linux?
Also check this message
-
sabre6, in that case check your TV settings, it's TV fault. X92 never had this problem.
-
sabre6 ,
cat /sys/class/display/mode
If it's wrong you can try command bellow and shutdown and test again
fw_setenv hdmimode 1080p60hz fw_setenv outputmode 1080p60hz
-
sabre6 , I have the same box, but doesn't have this problem. Try to switch manually on correct hdmi port before powering on the box and check if it found. And also check the CEC settings
And check the resolution via ssh, may be it wrong
-
I made a file to operate the remote from the old box GoClever Android Box (up to version 8.90.4 I had it as a second remote control along with the default one entered in the system).
Unfortunately, the keyboard does not want to work with the letter keys. I wrote in /storage/.config/rc_maps.cfg
following line "meson-ir * my_file" and I entered the command "ir-keytable -a /storage/.config/rc_maps.cfg -s rc0" via ssh. I'm not happy about the pilot's work. When I delete the line that I added in rc_maps_cfg I have no new or old remote control. How can I return to the remote installed by default in the system (K1 plus S2 T2 from China s905).
Thank you in advance for your help in solving the problem
Did you try to switch it in keyboard mode?
LE9.0 remote configs ir-keytable Amlogic devices -
What service is responsible for IR remote?
Is it possible to start it manually after returning from suspend mode? -
Then how to make sense of the version numbers...?
Since this version is [8.90.4] LibreELEC 9.0 Alpha for S905/S912 devices
And the other topic is [8.90.11a] LibreELEC 9.x for S912kszaq , Could you change the link for S912 devices in [INDEX] LibreELEC community builds for Amlogic to this thread to exclude confusing?
-
GDPR-2, could you also add ir-keytable delay and period values too to left autostart.sh empty?
ir-keytable -D xxx -P yyy
Because various remotes have different values for best work
-
Thank you
reinstalled 8 90 4
remote control works very badly
kiii pro
You can change buttons functionality as you wish
-
>98-eventlircd.rules: why blank?
LE9.0 remote configs ir-keytable Amlogic devices
>Lircmap.xml: is to define relations between key definition in X92 and LIRC keys?
To redefine default values(some of default can be wrong)
>keymaps.xml: is to define relations between LIRC keys and KODI commands?
Yes, to redefine default values. You can use only those that are wrong. I made a copy from somewhere and made changes only in places what I need.
About shutdown and all other buttons it's true.
I found something on Kodi wiki and did a tests on windows that I need.
They names are almost the same that they mean.
You can ignore most of them or delete section and try the defaults.
I don't have any guide, I spent a lot of time to find examples and correct keys
Actions you can find on Kodi wiki too, they good described there.
But something sometimes doesn't work)
Also some info can be found here:
Infrared Remotes [LibreELEC.wiki]
I don't use TVRecordings and TVTimers, so I left them without changes. Possible it's pvr related section.
-
Hello guys,
I have a Goo Bangdoo XB-II and I was able to create my keymap file (many thanks @kostaman).
I would like to handle the longpress of some key but I didn't understand how do it. Can someone help me?
Check my example:
