Posts by avd

Tested with laptop connected via Ethernet and beebox connected to homeplug transfer speed is 8mb/s.

Tested with a rpi 3b+ connected to homeplug speed is 16mb/s.

I can only assume that there is driver issue with beebox I know homeplug is not ideal.

Just remembered I have a ugreen usb gigabit network adapter at home somewhere. If on-board etherent is no gd I will try adapter.

Yeah it's n3150. I will try with ethernet cable tomorrow and see if that is any better. Would a bios update help?

Hey guys.

Just installed libreelec on an asrock beebox nuc which has a Intel Celeron n1350 with 8gm ram and 60gb ssd msata hard drive, with a powered usb external sata hard drive 1.5tb.

I can access the external hard drive from my Windows 10 laptop to view files but the problem is transferring files to the hard drive from the laptop. The speed is 150kb/s which goes up and down. I have the laptop connected to network with Ethernet cable. Libreelec nuc is wifi. I know wifi is not ideal but I had Windows 10 on nuc and transfer speeds were 25mb/s.

Is this normal?

Hey guys I'm using asrock Beebox n3150 and would really like working bluetooth so I can use my fire tv bluetooth remote. Is this possible? Thanks

Anyone got a tanix tx92? There is one on amazon but has tx92 on the top of the box not tanix. Could this be a clone? Thanks

Does 4k playback work on this build properly? I have a h96 pro tv dongle and 4k playback is stuttering.

hey guys I have this running on the h96 pro dongle. My Bluetooth does not work. Is this down to the device tree I have downloaded?

so basically ya don't know what ya getting lol. Might just stick with android and get the tanix tx3 mini s905w

I had a look through that thread the other day. I'm just looking for a cheap box for a friend so I basically take my chances and hope it has the hardware required. I like the mini m8s ii might try that.

hey guys what is the best box out of list that is gonna work? What I mean is no matter where I buy it from its still gonna have the same hardware in.

Thanks

Hi guys.

I'm running libreelec off a sdcard on a mxqpro 4k box. Everything works fine but my storage partition is only 32mb, along with the 511 mb partition for system files. I then have an unallocated partion of 14.2gb (sd card is 16gb). I thought libreelec would use the rest of the sd card for storage? I did try deleting the 32mb partition and just setup an ext4 partition but now i get a cant access tty error. How can i setup the rest of the card for storage if libreelec is not doing this? Or could i just extend the 32mb partition?

You should be able to select different display rate.

It's where you adjust display resolution. You got 4k tv. ?

Hey guys i have an mxq pro 4k, i ran libreelec from memory card fine then attempted to installtointernal, now i have nothing when i power on the box. Does anyone have a link to android firmware that will work from sd card?
Also has anyone successfully installed to internal?

Will this work for 24p out of sync in krypton? Where is advancedxml ?

When I have adjust display refresh rate on. I have noticed an audio sync issue when playing content with 24fps

Quote from Klojum

If you upgrade from 7 to 8, those settings will remain.
And no, LibreELEC is not that smart (unfortunately) that ALL settings will be correct by default.

I have libreelec 8 from Demetris running on an android s802 which must have the auto framerate set to on.

Can I just upgrade my libreelec 7 to 8 via update folder or is a fresh install best?
[hr]

Quote from S80_UK

Was the SD material that had the issue interlaced? I think that the driver for the Intel graphics hardware improved in this respect in LibreELEC 8. Certainly I have a small number of 1080i Blu-rays that I ripped which had issues with LE 7 which were solved with LE 8. I am running LE on an N3060, but the graphics hardware on the N3150 is the same as far as I know.

I'm not sure it was a tv show. I will upgrade to libreelec 8.