Interesting but not sure what you changed with that..Do you mean the temp LE was showing on UI didn't match the one from ssh "vcgencmd measure_temp"
Fan control should measure internal temp with that command in script..
Posts by Mario77
-
-
It's already default and enabled and confirm not working.
Will report back. Is this what I need to type in my daughter RPi3: \\enter_ip_address_here\HD
smb://enter_ip_address_here/HD
-
Have a look at the Flirc USB Receiver
-
Looks like a network issue...did you try to plug your rpi network cable directly in your main router or even change the cable..
Even try to check your network settings on Libreelec settings addon...check dns1/dns2 and so on..
Try to avoid unnecessary addons and create your own playlist with radio channel links
Try to load this small playlist from file manager and see they play ,,,just rename .txt to .m3u radio.txt
-
So I was trying PVR Simple Client and encountered a strange issue..it's even occuring with Tv headened Client streams...When I start playback minimized picture is turning black and get a "no signal" msg from TV...it's only occuring with 1080 streams....the rest work fine and can see the stream on PVR menu window...When the screen is black and I press stop on my remote it returns back to PVR so Kodi is not freezed...
If I untick the start playback minimized and streams start on full screen it all works perfectly...
I m using RPI2 with latest LE 8.2.1
Thanks
-
Hi,
I have RPi3 and LibreElec installed. How do I add either VLC or MXPlayer as a default player for kodi?
MxPlayer might be a no go...that's an android apk as far as I can tell...VLC is not gonna work directly with Libreelec but there is a kind of a workaround to make it work via docker (not tested)...that means no HW accelaration..
You don't really need any other players on LE as available players work fine...why would you need VLC on LE?
-
Thanks again vpeter
What's the difference between the last 2 builds?
-
I have installed this on my RPI3 after having used your standalone addon which I was very happy with.
Now I use Emulation Station but for some games (Lion King on the SNES for example) the screen just turns black and goes back to the ES screen. I can only get it working by going via Retroarch and loading it through that. Strangely ES works fine for (most ) other games.
If they work in RA but not in ES try to unzip the roms...for some reason some zipped roms don't work in ES or try to setup AEL...I never used ES again since setting up AEL...but never uninstalled it...ES is pointing to same assets as AEL so you don't have to keep 2 copies of artwork,it's easier to have roms within Kodi UI..
-
I'll try this.
What I mean is that you might be able to change some behaviour in the way your connected devices communicate....At the moment you are trying to switch off the TV by suspending Kodi when you can do it the other way round...when you switch off the Tv it will suspend Kodi/or turn off kodi/or just pause or stop any media playing and other connected devices...it's all in peripheral settings
-
To what? I've tried changing the settings to say, stop the system from turning off the TV on shutdown, but this not the behaviour I want.
can't you do it the other way round for standby mode...screensaver activate standbye...wake up screensaver wake up tv...
-
It seems the problem I am encountering is different from the one in this thread.
What is happening in my case is that, when the power button command is set to "suspend", after pressing the button Kodi powers off but doesn't send the CEC command to the TV and Receiver. Upon waking the system, the command to turn off the TV and receiver is sent followed shortly by the command to wake.
So the behavior is as follows:
Kodi On --> Press Power --> System Powers down, TV and receiver remain on --> Press Power --> PC Powers On --> TV and receiver power off --> TV and receiver power back on immediately.
I suppose I should open a separate thread on this.
Did you try to change the cec/peripheral settings?
-
Not suitable for my provider's streams. That's why I have to use PVR Simple with the pause function.
Uncheck "scan after creation" and set "Service ID" to 1
You will get all services ready to be mapped
The content cannot be displayed because it is no longer available. pic not loading
-
Ok managed to do it..thanks..Don't think is working ok tough with my setup...pvr.simple works better despite harder to organize channels..had few errors with tvheadened like "no free adaptor" and "no signal" but not on all channels...also noticed that there is no working wheel before the start of a stream..the rest works fine.anyway removed it now and back to simple client.
I think tvheadened is more for those who use tuners..
-
Create 'IPTV auto network', enter your m3u URL as the source of muxes for this network.
Like file:///location/of/file.m3u
it must be only one line!
Yeah that's what I always done...but after that it still needs scanning for services?and only channels showing in services show up
-
What about to try tvheadend. There is support for ip tv networks, you can add multiple networks. There is support for timeshift.
Would be a good choice if there was an option to add playlist without scanning for services...scanning is a pain
-
Not sure what you mean..Is it not working for you?
-
LE9.0 builds come up with the pause right from the box.
Just checked it out and it's working pretty damn good, chaching to all available RAM.
But lots of other bugs scare me away)
Might need few space for hd streams tough..not sure for how long it may pause..
If you want to try the multi version here is the repo..they are ready to install depending of your hardware pvr.simple.multi
-
Can you share your build? I'm interested in "the pause button" function.
Don't think the pause button function is working with all streams..perhaps would have to cache the stream to hdd or something similar..never worked for me anyway even with the PVR.iptv simple patch mentioned above..
