Posts by envagyok
-
-
I have latest LE8 installed on sdcard and latest LE7 installed to nand.
I noticed every movie with subtitle has microstutter with LE8 especially when subtitle displayed.
With LE7 I never see that.
It can fix simple, or it is problem with kodi 17?
Is any hope to correct this in future?
I see many movie with subtitle and high quality original language, and this error makes watching quality of movies to unacceptable -
Update in #1.
[hr]
Have you installed tvheadend42 8.1.113?I tried now with 113 too.
When tvheadend gabbing epg, then isn't switch to other tuner.
Now grabbing dvb-t epg, and I cannot watch dvb-s because no signal
log :
no input source available for subscription.
I think already tvh started grab epg then isn't stop at tuner type changeedit:
interest, when grab dvb-t epg then no signal at dvb-s channels
when grab dvb-s then work switching to dvb-t -
Tried again with completely new install - same result. I have a KII Pro here. Looks like it chooses DVB-T as default if both tuners have been enabled. To switch to DVB-S I have to disable DVB-T.
Try enable power save at configuration/dvb inputs at all device what you used
-
Ok, I revert to 8.0.0.D
And change turn off lnb when idle to ticked.
seems working dvb-t and dvb-s2 too.thank you afl1!
A question: the dvb-t tuner work as dvb-t2 with libreelec too, or just with Android?
Further testing...
when dvb-s epggrap make,then dvb-t channel choose= no free adapter -
For me internal dvb-t not work.
I disable attached usb dvb-t tuner, the antenna cable put to dvb-t.
Enable internal dvb-t tuner, and set up network to dvb-t
When i choose dvb-t channel, says no signal
And when dvb-s epggrap make, the no free adapterWhen you want, tomorrow morning i make log.
Ok, I revert to 8.0.0.D
And change turn off lnb when idle to ticked.
seems working dvb-t and dvb-s2 too.thank you afl1!
A question: the dvb-t tuner work as dvb-t2 with libreelec too, or just with Android?
-
Updated version with OTA EPG fix:
service.tvheadend42-8.1.112a.zip
Pls, test tuner sharing among standards.For me internal dvb-t not work.
I disable attached usb dvb-t tuner, the antenna cable put to dvb-t.
Enable internal dvb-t tuner, and set up network to dvb-t
When i choose dvb-t channel, says no signal
And when dvb-s epggrap make, the no free adapterWhen you want, tomorrow morning i make log.
-
Hy,
how can I read CPU temperature over SSH?
-
I mostly use K1plus as TV server.
Now I watched a movie with high bitrate 40MBit.
After 1.5hour the playing has every 2-3 sec a stutter.
Maybe overheating problem?
When idle, the team is 68 celsius degree.
How can I see over SSH the temperature when I play movie? -
Guys, afl1 said many times that it's a hardware limitation that the tuners cannot work at the same time...Better write to your signature, or to the first post
-
Enable hardware decoding
-
I use minimx 1/8 with libreelec 7 12h version at nand, and 8.0.0.c with sd.
I observed still 8.0.0c seems not so smooth play video files as older version. -
There is dual audio version of libreelec to wetek play, core, x86/64,imx6, rpi:
Index of /LibreELEC-DualAudio
and a kodi forum:
[Project] Dual Audio Output support (Krypton/Jarvis/Isengard/Helix/Gotham/Frodo)
[PATCH] Dual Audio Output support for XBMC (Eden Updated)Possible it build to S905?
Can it implement to main version, or can someone make it?
I never compile, so when no one make it, after little help I can make too. -
With libreelec 7 and 8 deinterlacing and upsampling not the best vq due limitation of S905 chipset with driver/kernel now (I think Amlogic can better deinterlacing, scaling, but yet not good implemented)
So, when I need watch 576i DVD or dvcam record, I think the best solution to switch output to 576I, and give the deinterlacing and scaling job to TV, what I think make it better vq.
The same job can make with 1080i sources too.maybe good idea make at libreelec control panel or at video setting a possibility to enable or disable deinterlacing, with/without 1080i 576i video output.
possible make it?
Thanks -
+1 :R
Not normal oscam protocol use. Use net protocol with 127.0.0.1 or own ip adress.
-
Hi,I am using KII pro with Malaysk fw in internal flash - its working good.
On SD card I have latest image LibreELEC-S905.arm-8.0-devel-7.95.beta6a-20170214112050.img.gz with replaced dtb.img for KII pro.
I am using TVHeadend service.tvheadend42-8.1.110.zip + pvr.hts-3.4.17.zip . Everything is working well except of powering ON the box:1. When I power off the box by remote, box powering off, led switch to red, but I cant power on box with remote, it doesnt do anything.
2. To power on box I always need to make toothpick method. If I power on box with only pushing power button I get this errorWhy it cant boot normaly from sd card? Any idea?
Set up kodi at settings to switch off with power button, not standby
-
Depending on the type of subtitle, it has to be rendered as a graphic to be displayed. As I wrote before, especially with subtitles in ASS format (which allows for a lot of effects, colors and other fluff) this will lead to CPU usage spikes that interfere with the video rendering. It is very easy to notice with software decoded videos, but can also be seen with hardware decoding. You can try downloading subtitles in other formats for your files and check if it gets better.In my opinion, the root cause for this is that kodi apparently uses just-in-time rendering for the subtitles. This is no problem on PCs with lots of CPU power, but the arm SoCs do not have much power to spare. Pre-rendering subtitles in advance could help with the spikes, but would delay the start of video playback and is most likely a significant change in the kodi player code.
I noticed with movie MKV with srt subtitle mixed in.
and with libreelec 7.0.2.12h I isn't see this problem, just with LE8 beta -
I noticed movies with subtitles little stutter when new text subtitled to screen.
Other's noticed this too?
I don't know with log it can I show?