Add dtoverlay=w1-gpio,gpiopin=4 to config.txt instead of using the dtoverlay command in autostart.sh if this still fails upload a full dmesg log.
You're right, passing this option through config.txt fixes the problem, thanks!
However, IMHO support for dtoverlay command should be fixed in a future release.
Add dtoverlay=w1-gpio,gpiopin=4 to config.txt instead of using the dtoverlay command in autostart.sh if this still fails upload a full dmesg log.
But I've already checked the dtoverlay -l output, its output was the one expected under the circumstances:
rpi:~ # dtoverlay -l
Overlays (in load order):
0: w1-gpio gpiopin=4
Hi,
The latest RR build (20190221) has an issue with w1-gpio support. My .config/autostart.sh contains the following commands:
dtoverlay w1-gpio gpiopin=4
modprobe w1-gpio
modprobe w1-therm
In this build loading w1-gpio module fails with the following errors:
[ 6.854425] w1-gpio onewire@4: prop pinctrl-0 index 0 invalid phandle
[ 6.854453] w1-gpio: probe of onewire@4 failed with error -22
I've discovered the way to fix $subj problem and is quite simple:
echo 0 > /sys/module/hid_apple/parameters/fnmode
This Chinese device pose as an Apple item (vendor ID 0x5ac), hence the usage of hid_apple driver:
Nov 06 09:18:36 rpi kernel: apple 0005:05AC:022C.0012: unknown main item tag 0x0
Nov 06 09:18:36 rpi kernel: input: Bluetooth 3.0 Macro Keyboard as /devices/platform/soc/3f201000.serial/tty/ttyAMA0/hci0/hci0:11/0005:05AC:022C.0012/input/input19
Nov 06 09:18:36 rpi kernel: apple 0005:05AC:022C.0012: input,hidraw0: BLUETOOTH HID v1.1b Keyboard [Bluetooth 3.0 Macro Keyboard] on b8:27:eb:4f:ff:99
Nov 06 09:18:36 rpi systemd-logind[11943]: Watching system buttons on /dev/input/event0 (Bluetooth 3.0 Macro Keyboard)
Just to give you a "warning" cputemp: give RPi SoC sensor priority by MilhouseVH · Pull Request #3073 · LibreELEC/LibreELEC.tv · GitHub your problem lead to some updates for the cputemp script so once it's merged might you have to check it first if something is broken
Turns out the problem it is not located in the /usr/bin/cputemp script, the current version of this script correctly reports the CPU temperature as it is read from /sys/class/thermal/thermal_zone0/temp. It seems that Kodi does not use this script, probably reads the temperature directly from /sys/class/hwmon/hwmon0/temp1_input.
Can you check if you have more devices in /sys/class/thermal/thermal_zone0/temp or /sys/class/thermal/thermal_zone1/temp or something like this? Also check if /sys/class/hwmon/hwmon0/device/temp1_input exists.
I've connected a temperature sensor and used /sys/bus/w1/devices/*/w1_slave to read its value, but now I see there is another way to read it via /sys/class/hwmon/hwmon0/temp1_input.
I've fixed it with an advancedsettings.xml like this:
<advancedsettings>
<cputempcommand>sed -e 's/\([0-9]*\)[0-9]\{3\}.*/\1 C/' /sys/class/thermal/thermal_zone0/temp</cputempcommand>
</advancedsettings>Thanks a bunch!
LE: For Confluence skin fans, here is a favourites.xml file that would allow you to run RetroArch and EmulationStation:
<favourites>
<favourite name="EmulationStation">RunScript(/usr/bin/frontend-emulationstation.py)</favourite>
<favourite name="RetroArch">RunScript(/usr/bin/frontend-retroarch.py)</favourite>
</favourites>First of all kudos for keeping this distro up and running, it contains everything I want.
I encountered a minor annoyance. I use RR on a rpi3 B+ and I noticed that CPU temperature displayed in Kodi's system info is utterly wrong, it says CPU is at 18-19 C degrees while vcgencmd measure_temp and /sys/class/thermal/thermal_zone0/temp correctly report a temperature above 55 degrees.
This issue appeared the moment I placed this command in my /storage/.config/autostart.sh:
dtoverlay w1-gpio gpiopin=4
I grepped for "cputemp" in .kodi and found nothing relevant. Any idea how to fix this?
kszaq beta5b solved my issue with am-h264 hardware decoding, thanks!
kszaq Sorry about that, this is the output of "tail -f ~/kodi/temp/kodi.log"
16:58:52.023 T:4114358272 ERROR: Control 50 in window 10025 has been asked to focus, but it can't
16:58:55.165 T:3555980192 WARNING: Attempt to use invalid handle -1
16:58:55.423 T:4114358272 NOTICE: VideoPlayer: Opening: c3RvcmFnZTA3dHJhbnNjb2Rlci5y
Y3Mt/cmRzLnJvJTJGc3RvcmFnZSUyRjIwMTcl/MkYwMiUyRjA0JTJGNzM3MjM3XzczNzIz/N18wNDAyLUwtc3RhcmVhLm1wNCZmcj0x/Jmhhc2g9ZDQ5MDE1ZDk4ZmE4YmUwZWRjZDJhNG
YwMjE2ZDYyMzU=.mp4
16:58:55.423 T:4114358272 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
16:58:55.477 T:3555980192 NOTICE: Creating InputStream
16:58:55.847 T:3555980192 NOTICE: Creating Demuxer
16:58:56.641 T:3555980192 NOTICE: Opening stream: 0 source: 256
16:58:56.642 T:3555980192 NOTICE: Creating video codec with codec id: 28
16:58:56.645 T:3555980192 ERROR: Unable to load libamplayer.so, reason: libamplayer.so: cannot open shared object file: No such file or dire
ctory
16:58:56.645 T:3555980192 WARNING: CAMLCodec::CAMLCodec libamplayer.so not found, trying libamcodec.so instead
16:58:56.651 T:3555980192 NOTICE: Creating video thread
16:58:56.651 T:3555980192 NOTICE: Opening stream: 1 source: 256
16:58:56.651 T:3652182944 NOTICE: running thread: video_thread
16:58:56.652 T:3555980192 NOTICE: Finding audio codec for: 86018
16:58:56.654 T:3555980192 NOTICE: Creating audio thread
16:58:56.654 T:3606311840 NOTICE: running thread: CVideoPlayerAudio::Process()
16:58:56.665 T:3606311840 NOTICE: Creating audio stream (codec id: 86018, channels: 2, sample rate: 48000, no pass-through)
16:58:57.666 T:3555980192 WARNING: VideoPlayer::Sync - stream player video does not start, flushing buffers
16:59:08.826 T:4114358272 WARNING: Previous line repeats 6 times.
16:59:08.826 T:4114358272 NOTICE: CVideoPlayer::CloseFile()
16:59:08.826 T:4114358272 NOTICE: VideoPlayer: waiting for threads to exit
16:59:08.828 T:3555980192 NOTICE: CVideoPlayer::OnExit()
16:59:08.828 T:3555980192 NOTICE: Closing stream player 1
16:59:08.828 T:3606311840 ERROR: Got MSGQ_ABORT or MSGO_IS_ERROR return true
16:59:08.828 T:3606311840 NOTICE: thread end: CVideoPlayerAudio::OnExit()
16:59:08.828 T:3555980192 NOTICE: Waiting for audio thread to exit
16:59:08.828 T:3555980192 NOTICE: Closing audio device
16:59:08.835 T:3555980192 NOTICE: Deleting audio codec
16:59:08.835 T:3555980192 NOTICE: Closing stream player 2
16:59:08.835 T:3652182944 ERROR: Got MSGQ_ABORT or MSGO_IS_ERROR return true
16:59:08.835 T:3652182944 NOTICE: thread end: video_thread
16:59:08.835 T:3555980192 NOTICE: waiting for video thread to exit
16:59:08.836 T:3555980192 NOTICE: deleting video codec
16:59:08.871 T:4114358272 NOTICE: VideoPlayer: finished waiting
16:59:08.882 T:4114358272 NOTICE: CVideoPlayer::CloseFile()
16:59:08.883 T:4114358272 NOTICE: VideoPlayer: waiting for threads to exit
16:59:08.883 T:4114358272 NOTICE: VideoPlayer: finished waiting
16:59:08.883 T:4114358272 NOTICE: CVideoPlayer::CloseFile()
16:59:08.883 T:4114358272 NOTICE: VideoPlayer: waiting for threads to exit
16:59:08.883 T:4114358272 NOTICE: VideoPlayer: finished waiting
16:59:18.092 T:3385848736 ERROR: Unable to find plugin
16:59:18.092 T:4114358272 ERROR: GetDirectory - Error getting plugin://
16:59:18.095 T:4114358272 ERROR: CGUIMediaWindow::GetDirectory(plugin://) failed
Please let me know if you need other traces or you need me to test something else.
I'm using 7.95.beta5 and I have problems with hardware acceleration of am-h264 decoder on a 1280x720 25 fps video stream. If I'm using h264 acceleration the screen remains black and there is no sound. My box has a S905X SoC (A95x 2/16GB) and this is what I see in the kodi logs:
08:55:53.765 T:3652187040 WARNING: CAMLCodec::CAMLCodec libamplayer.so not found, trying libamcodec.so instead
08:55:53.765 T:3652187040 NOTICE: Creating video thread
08:55:53.765 T:3652187040 NOTICE: Opening stream: 1 source: 256
08:55:53.765 T:3693704096 NOTICE: running thread: video_thread
08:55:53.765 T:3652187040 NOTICE: Finding audio codec for: 86018
08:55:53.766 T:3652187040 NOTICE: Creating audio thread
08:55:53.767 T:3625182112 NOTICE: running thread: CVideoPlayerAudio::Process()
08:55:53.783 T:3625182112 NOTICE: Creating audio stream (codec id: 86018, channels: 2, sample rate: 48000, no pass-through)
08:55:54.453 T:3652187040 WARNING: VideoPlayer::Sync - stream player video does not start, flushing buffers
08:59:47.338 T:4111384576 WARNING: Previous line repeats 123 times.
08:59:47.338 T:4111384576 NOTICE: CVideoPlayer::CloseFile()
08:59:47.338 T:4111384576 NOTICE: VideoPlayer: waiting for threads to exit
08:59:47.343 T:3652187040 NOTICE: CVideoPlayer::OnExit()
08:59:47.343 T:3652187040 NOTICE: Closing stream player 1
08:59:47.343 T:3625182112 ERROR: Got MSGQ_ABORT or MSGO_IS_ERROR return true
Thanks!
7.0.3.012f supports both my bluetooth input devices, Rii i8+ keyboard and Logitech MX 2 Anywhere mouse.
I have Bluetooth issues on 7.0.3.012d build, bluetooth service (or driver) does not run properly on A95x 2/16GB TV box (S905X).
The 7.0.3.012c build was able to detect and pair with my Rii i8+ BT keyboard, but not with my Logitech MX Anywhere 2 mouse. Here are the bluetoothd logs related to this issue:
Jan 25 08:44:59 nexbox bluetoothd[2785]: No cache for E5:1F:0F:F9:9F:80
Jan 25 08:45:04 nexbox bluetoothd[2785]: input-hog profile probe failed for E5:1F:0F:F9:9F:80