And what is that ?
This pre alpha test version is out of date(2017)
Read and understand
Posts by Tim_Taylor
-
-
Stupid question
-
any solution for android ?
Pls ask in Android Forum - No Andoid support here
-
3.5" Hard drives with their own power supplies will be OK.
Yes, but only fhd playback from NTFS formated hdd.
jellyfish-120-mbps-4k-uhd-hevc-10bit needs Gb network and NAS and nfs mounted share from OS(no SMB)
-
The first fresh install failed in some points - therefore I said try a new fresh install optional using another sd card.
I installed Openelec and Libreelec many times on raspberry and amlogic items - sometimes a fresh install failed.
-
Bits are also reportet by AVR - but I never saw 12 bits
-
Dose your AVR/TV actually say YcbCr 444:30bit (3*10bit) or is it just the HD/UHD(HDR) that changes?
Yes - AVR reports YcbCr 444 or 422
TV reports SDR/HDR
-
Either I´m stupid or lucky.
Checked a few min ago.
Recorded TV 720p(SDR) - OK
Recorded TV 1080p(SDR) - OK
4k 10Bit HDR - OK
My combination box-AVR-TV is working well - TV switching from SDR to HDR and back to SDR, also 420/422/444 depending on video file
Maybe some combinations are not working (my TV is from 2017, my AVR from 2016)
-
Doesn't work on my boxes, I'do some tests;)
I didn´t check every video file, but playback looks OK.
Some files checked the colour space - all OK - SDR/HDR is recognized by the TV
I´m only using my 4k TVs(connected vie AVR) to play video or music files from NAS - no live TV, IPTV, DVB-S2 tuner etc.
-
Can you explain what you mean by "automatic", and how you selected that?
I do nothing - colour space changes automatic to 444,10Bit playing video
-
I use automatic color space - Why should I change it manual
-
they all just say all you need to do is enable SSH in the menu (or during setup).
Yes - only enable SSH in settings, that´s all
You got connection refused - SSH is disabled.
Try a fresh installation and wired network connect
Another check:
netcat -vvzw1 192.168.1.133 22
Output must be something like
Connection to 192.168.1.133 22 port [tcp/ssh] succeeded!
-
Try ssh from Linux with -v option
ssh -v root@<ip> -
Just don't know what was going wrog yesterday.
Maybe wrong sequence and misunderstanding.
Without the vfd.conf corresponding to Your hardware the installation will fail.
-
LIBREELEC_DISK changed to STORAGE
You have to modify some steps
-
Any ideas?
Yes
/dev/mmcblk1p1 is the wrong partition
You are using LE 8.9 - not LE 8.2
Partition layout has been changed in LE 8.9
-
How can I achieve this?
Use the tar command to create the archive, copy the archive to destination and extract
-
I'm glad it works great for you
There has been minor issues of which I acknowledge but these are mainly introduced by the Kodi team, some I have been responsible for but nothing to the degree of what is reported.
There is too much inconsistency with testing and too much b/s from users who don't know what they are doing and cause half the problems themselves, ie dtb issues/ installing to internal/ not providing kodi and kernel logs/ changing sysfs kernel flags/ using build threads as a q&a/ telling me my decisions are bad.
It would help if developers had the ability to moderate their own threads but we don't and I can't make head or tail of things because of all the noise that is generated.
I'm burned out from it all and I'm not the only one, it's ashame because when I started I was full of enthusiasm for LE on Amlogic but the forums and past issues with how LE is run has totally drained me to the point I don't want to carry on anymore and that is why I have asked for the thread to be closed.
In my opinion some threads need more moderation, cleaning up all self created problems etc.
I´m working in IT since 1993 - I know a lot about dumbest assumable users
