Posts by Zatserkovnyy

I have installed the img of the official LE on the Khadas VIM1. It works without complaints, except if you turn on the sound track of the DTS/Dolby, then turn on mp3/aac/flac, then the sound disappears. Does it make sense to upgrade to this version? What are the advantages over the official one? What's the difference?

---

У меня установлен образ LE официальный, приставка Khadas VIM1. Работает без нареканий, за исключением, если включить звуковую дорожку DTS/Dolby, потом включить mp3/aac/flac, то звук пропадает. Есть ли смысл переходить на эту версию? Какие она дает преимущества перед официальной? В чем отличие?

The problem is not solved

LE 9.0.0, Khadas VIM1, Nexbox A95X

Same problem, .008

Hi, datrh. Firmware for s905x is .008 version? Where do you download the original image, which then modify? In the version .007 I downloaded the image from the USB/SD Creator. But in .008 version of the Amlogic devices is missing from the list (on the left tab).

Can I install the beta version KVIM (8.90.008) on the Nexbox A95X (s905x)?

Hi. Tabs "Amlogic s905x/w..." will not be in the USB/SD Creator? Why was the Amlogic s905-devices removed from the releases .008?

Download the dtb-file from here.

Quote from hAZAR

Ive been using libre for ages on a raspberry. However I wanted hevc support, so after reading the forums, I bought a Mecool M8S pro + (S905x) as this was recommened. This one does not have a reset button in the AV hole.

Whilst this box does have a sort of kodi it’s not to my liking, so I wanted to boot libre of the sd card.

I used LibreELEC-S905.arm-8.2.4.2-S905Test-1529136339 and tried LibreELEC-S905.arm-8.2-8.2.3.1.

But all I got was the Mecool banner and then it just stayed there.

I’m sure it should run as other people have it running on M8S boxes, so I must be doing something wrong.

Can anyone point me in the right direction.

Thank you.

Display More

Look towards the device tree. It must match your box.

Quote from Emerson

Yes, clean installation will be fine.

Login SSH and type touch /storage/.update/.nocompat

First I enter the code via SSH. Then I copy the *.tar and *.dtb files into the "Update" folder and restart. All right?

Forgive me for stupid questions, I don't want to break down what works

Quote from Emerson

This version is bad, use this, or look at ext4 version.

Thanks. And clean installation and recovery settings from backup can solve the problem?

I don't quite understand the code "touch /storage/.update/.nocompat"

Nexbox A95X (s905x).

ERROR: LibreELEC-S905.arm-8.2.4.2-S905Test-1529136339.tar is not compatible with S905.arm hardware - update cancelled.

Current system: S905.arm

Update system: S912.arm

Hi. Can I make a backup LE (from settings menu) in the s905x-box and restore it to the s912-box?

Vontar Z5 Supermax (analogue Yoka KB2, Mecool BB2) 2/16 Gb: everything works well, sometimes it reboots. Thank you, kszaq!

LE 8.0.0b -> Nexbox A95X (2/16) from SD Card -> HDMI 2.0 -> Onkyo TX-NR727 = DTS-HD MA/HRA working fine.

Thanks, her!
There is no other way to see the internal memory? Why this code can not be included in the firmware to always see the internal memory?

Should the internal memory of the box will see, if the LE is installed on the SD Card?

Quote from RayW

Not had chance to check the WiFi / Ethernet fix yet but was never really a problem for me. Does any one know if there is a fix in this build for that weird problem when enabling the Update Channels and it leaving a totally no content options panel on the Libreelec settings main screen ??

thread-3588-post-29937.html#pid29937

Quote

If internal memory of your box is not visible, try a device tree with _nand suffix.

Does this mean that if the LE is installed on the SD Card, I can see the internal memory of box?
Or, the x_nand.dtb needs to be installed to the internal memory?