Posts by sab

hi CHV that seems to have also worked for me, getting rid of the dvb_usb_v2nd dvb_core

thanks

still have same issue with 8.2.1 update. can anyone help? thanks

i have done a clean install of 8.2.0. but no i no long record TV.

if i press record in EPG or as immediate start rec it starts then immediately stops say finished recording but there is nothing in the recordings are.

i have tried forcing an ATO epg update.

deleted all channels and rescanned

tvheadend client is set to get all info from backend.

anyone know where i can start looking for issues?

thanks

Ok so ive fixed it but not sure why it had the issue.

what i did was tested the record in tvheadend backend, also failed.

i them mount the recordings share, copied a file into it to see if it was a permission issue. file copied ok.

deleted file.

then tried record from tvheadend backend, now it works?

tested kodi, now records?

here is the link BbJa

to help? here is the lsmod when it works

RaBX

here is the lsmod from 7.0.3(sorry lsmod | paste doesnt seem to work in 7.0.3, curl: (6) Could not resolve host: sprunge.us)

Module Size Used by

8021q 15457 0

ir_xmp_decoder 2705 0

ir_lirc_codec 4141 0

lirc_dev 7691 1 ir_lirc_codec

ir_sharp_decoder 2069 0

ir_mce_kbd_decoder 3655 0

ir_sanyo_decoder 2261 0

ir_sony_decoder 2067 0

ir_jvc_decoder 2065 0

ir_rc6_decoder 2802 0

ir_nec_decoder 321 0

ir_rc5_decoder 2065 0

fc0012 4348 4

rtl2832 10841 4

i2c_mux 2422 1 rtl2832

rc_imon_pad 1709 0

snd_hda_codec_hdmi 31862 1

imon 19306 1

intel_powerclamp 6919 0

intel_rapl 8800 0

iosf_mbi 2778 1 intel_rapl

dvb_usb_rtl28xxu 16217 4

dvb_usb_v2 11931 1 dvb_usb_rtl28xxu

dvb_core 72343 2 rtl2832,dvb_usb_v2

snd_hda_codec_realtek 51436 1

snd_hda_codec_generic 43541 1 snd_hda_codec_realtek

snd_hda_intel 20100 1

snd_hda_codec 70076 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel

snd_hda_core 28290 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel

snd_hwdep 4819 1 snd_hda_codec

nuvoton_cir 11542 0

rc_core 14638 21 ir_sharp_decoder,imon,ir_xmp_decoder,lirc_dev,nuvoton_cir,ir_lirc_codec,dvb_usb_rtl28xxu,ir_rc5_decoder,ir_nec_decoder,ir_sony_decoder,rc_imon_pad,ir_mce_kbd_decoder,ir_jvc_decoder,dvb_usb_v2,ir_rc6_decoder,ir_sanyo_decoder

sorry noticed and issue with the client was set to 127 have changed it to the correct ip, but still showing same issue. attached new log.

hi sorry. Yes can login to tvheadend no issues. and yes can see dvb device.

hi here is the url

JGXE

ok thanks for that. i tried it, but it still would connect after suspend?

message on screen says something like "tvheadend ths client cannot connect"?

this is the forum link Tv Guide not closing after channel selection

sorry, my mistake. i did report it with kodi and it is fixed for Kodi Leia(18) this is using kodi Krypton(17.4). again sorry.

8.1.1 also has this same issue.

ok this seems to have worked. not errors. and didnt freeze. tv working.

systemctl stop service.tvheadend42

rmmod dvb_usb_rtl28xxu

rmmod rtl2832

rmmod dvb_usb_v2

rmmod dvb_core

wait some sec

modprobe dvb_usb_v2

modprobe rtl2832

modprobe dvb_usb_rtl28xxu

systemctl start service.tvheadend42

can you help me with what i do now? thanks.

here is the info

UXXI

ok so doing

systemctl stop service.tvheadend42

rmmod dvb_usb_rtl28xxu

rmmod rtl2832

no errors

modprobe rtl2832

modprobe dvb_usb_rtl28xxu

systemctl start service.tvheadend42

system froze. had to reboot.

if i do

systemctl stop service.tvheadend42

rmmod dvb_usb_v2

rmmod: ERROR: Module dvb_usb_v2 is in use by: dvb_usb_rtl28xxu

rmmod dvb_core

rmmod: ERROR: Module dvb_core is in use by: dvb_usb_v2 rtl2832

change order do first

rmmod rtl2832

rmmod: ERROR: Module rtl2832 is in use

IJBU

ok so it gave me

Module Size Used by

8021q 24576 0

ir_lirc_codec 16384 0

lirc_dev 20480 1 ir_lirc_codec

fc0012 16384 4

rtl2832 20480 4

i2c_mux 16384 1 rtl2832

snd_hda_codec_hdmi 45056 1

rc_imon_pad 16384 0

snd_hda_codec_realtek 65536 1

intel_powerclamp 16384 0

dvb_usb_rtl28xxu 28672 14

intel_rapl 20480 0

snd_hda_codec_generic 65536 1 snd_hda_codec_realtek

dvb_usb_v2 24576 1 dvb_usb_rtl28xxu

dvb_core 86016 2 dvb_usb_v2,rtl2832

imon 32768 0

snd_hda_intel 28672 3

snd_hda_codec 90112 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek

snd_hda_core 49152 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek

snd_hwdep 16384 1 snd_hda_codec

nuvoton_cir 20480 0

rc_core 24576 12 imon,ir_lirc_codec,rc_imon_pad,lirc_dev,dvb_usb_v2,nuvoton_cir,dvb_usb_rtl28xxu

thank you for all your help.

im all for "add support", but for me moving to v8 seems to be less functional maybe my HW? it not that new? even the epg guide open close function doesnt seem to work the same anymore.(Tv Guide not closing after channel selection) not sure if you can help there?

but happy to try the unload dvb modules. but not sure how i find what im ment to put in it? ive read the link above but still not sure what to put in? are you able provide another link or more info on how? sorry as the it says "beginner". we all got to start somewhere.

so what mite have changed from v7 to v8? if this is happening doesn't that indicate something is now broken/or removed in v8? thanks