Posts by thoradia

**thoradia** · Thoradia Add-ons **thoradia** June 19, 2019 at 6:22 PM

I have rebuilt the add-ons for 9.1, except qbittorrent

You might have to force update from Kodi (check for updates then update add-ons)

**thoradia** · Thoradia Add-ons **thoradia** June 19, 2019 at 6:21 PM

Quote from witek666

I tested Transmision clean installation on every millhouse version and still only works on # 301

On clean 9.1 I can not even install the repository from the THORADIA file

GENERIC version

Please be more descriptive

Why can you not even install the repository?

Could you provide me with a log, eg in a private conversation?

**thoradia** · Thoradia Add-ons **thoradia** June 19, 2019 at 6:59 AM

~~jhdgghost witek666~~

~~I have rebuilt the add-ons for 9.1, except qbittorrent~~

~~You might have to force update from Kodi (check for updates then update add-ons)~~

Meh... I forgot to merge master

Rebuilding now

**thoradia** · Thoradia Add-ons **thoradia** June 18, 2019 at 10:52 PM

Quote from Sanya

I have a similar issue with Deluge. I've updated whatever I can in coreelec and addons. Deluge Web-UI works but the daemon does not. I can't get it to work even with the sleep nor starting it manually with deluge.start or deluged.start. Not sure what to do here, had been working fine for a while until just a few days ago, not sure what changed, automatic update maybe? *shrugs*

I have updated Deluge to version 2.0.3

I have no hardware to test CoreELEC

Please provide the output of journalctl -u service.deluged, so that I can try to fix

To revert to Deluge version 1.3.15, manually install the add-on from here

Make sure to disable auto-updating the add-on to avoid installing Deluge version 2.0.3

**thoradia** · Thoradia Add-ons **thoradia** June 18, 2019 at 6:10 AM

Quote from jhdgghost

Going back to 9.1 build #415. I observe that transmission is not working. Last working version is #301. Transmission version is 9.1.16. Should work or still not adapted to openssl new version?

I will rebuild add-ons against latest master soon

**thoradia** · Thoradia Add-ons **thoradia** June 16, 2019 at 10:36 AM

Quote from hazz

Hi.

It's very likely I've done something to cause this, but I notice that after my system auto updated to deluge 2.0.2 (now 2.0.3) both couch potato and medusa are failing to send torrents to deluge. For medusa I was able to switch to webui method and it's ok, but couchpotato doesn't have that option so It's still failing.

I've tried removing and reinstalling couchpotato from the repository but that hasn't solved it.

Any ideas?

Couchpotato log from an attempted add below:

Code

06-15 12:43:33 INFO [o.core.downloaders.deluge] Sending "[redacted]" (torrent_magnet) to Deluge.
06-15 12:43:33 ERROR [o.core.downloaders.deluge] Failed to add torrent magnet magnet:[redacted]: EOF occurred in violation of protocol (_ssl.c:726) Traceback (most recent call last):
  File "/storage/.kodi/addons/service.couchpotato/couchpotato/couchpotato/core/downloaders/deluge.py", line 237, in add_torrent_magnet
    self.connect()
  File "/storage/.kodi/addons/service.couchpotato/couchpotato/couchpotato/core/downloaders/deluge.py", line 225, in connect
    self.client.connect(self.host, int(self.port), self.username, self.password)
  File "/storage/.kodi/addons/service.couchpotato/couchpotato/libs/synchronousdeluge/client.py", line 143, in connect
    self.transfer.connect((host, port))
  File "/storage/.kodi/addons/service.couchpotato/couchpotato/libs/synchronousdeluge/transfer.py", line 22, in connect
    self.conn = ssl.wrap_socket(self.sock, None, None, False, ssl.CERT_NONE, ssl.PROTOCOL_TLSv1)
  File "/usr/lib/python2.7/ssl.py", line 949, in wrap_socket
  File "/usr/lib/python2.7/ssl.py", line 617, in __init__
  File "/usr/lib/python2.7/ssl.py", line 846, in do_handshake
SSLEOFError: EOF occurred in violation of protocol (_ssl.c:726)

06-15 12:43:33 ERROR [o.core.downloaders.deluge] Failed sending torrent to Deluge
06-15 12:43:33 INFO [tato.core.plugins.release] Tried to download, but the "torrent_magnet" downloader gave an error

Display More

I have updated Deluge to the latest version, 2.0.3

Couchpotato and Medusa probably do not support this version of Deluge yet

You may revert to version Deluge version 1.3.15 by manually installing add-in version x.y.26, eg 9.0.26, and disabling auto-update

Deluge 9.0.26 for LibreELEC 9.0 is here

In any case, users should inform Couchpotato, Deluge and Medusa developers of the issue

**thoradia** · Thoradia Add-ons **thoradia** June 13, 2019 at 5:16 PM

Quote from jhdgghost

Yes I was in Millhouse testbuilds before install last official release. How do i manually install the medusa 9.05? Do I rewrite the files manually? Because i try install directly from zip file option and no work. If not always i can move back to 9.1.

Try to install this from zip

**thoradia** · Thoradia Add-ons **thoradia** June 13, 2019 at 6:58 AM

Quote from jhdgghost

Hello.

Yes i give to check updates. Little more info. I have a rpi 3b+ and libreelec 9.02 last stable version. The thoradia addon is 9.0.5 and the medusa 9.05. As i commented medusa not work after update to 9.02. If i try to reinstall or update medusa the error "The dependency os.libreelec.tv 9.1 could not be found" is shown. Sounds strange. Also tried install directly the service.medusa-9.0.5.zip from zip file and also show the 9.1 dependency error.

For some reason, add-ons for LibreELEC 9.1 are installed on your LibreELEC 9.0.2 system

Did you downgrade LibreELEC 9.1 to 9.0.2?

Add-on auto-update only upgrades add-ons (eg from 9.0.x to 9.1.y) but does not downgrade them (eg from 9.1.y to 9.0.x)

Therefore, you have to manually update all you add-ons, eg medusa, to downgrade them

In general, add-ons are built for a specific version of LibreELEC, eg 9.1, and are unlikely to run on other versions of LibreELEC, eg 9.0, 8.2

**thoradia** · Thoradia Add-ons **thoradia** June 11, 2019 at 11:07 PM

Quote from jhdgghost

I update to last stable version 9.02 and medusa is not working. When try to update Medusa there is an error saying the "dependency of os.libreelec.tv not found". Other addons are working properly and in previous test version of libreelec medusa was working properly. No sure if is a problem with the addon or a libreelec bug. Someway of bypass the issue?

Have you tried using 'check for updates' in the add-on manager?

**thoradia** · Thoradia Add-ons **thoradia** June 9, 2019 at 8:39 AM

Quote from Madbaires

Ah ok, thanks for info! mmm how can I update a bazarr version? or is not possible?

In interface bazarr Settings / General at end page not see the option to enable/disable updates (In wiki bazarr see the option)... by putty in /.kodi/userdata/addon_data/service.bazarr/config # nano config.ini see the line auto_update = True but nothing happens

Thanks!

The Bazarr add-on does not support auto-update

I will try to update the add-on in the coming days

**thoradia** · Thoradia Add-ons **thoradia** June 8, 2019 at 10:34 PM

Quote from TNS

https://yadi.sk/d/dhepyyrcterlf/leia-18/kernel_5.x/20190608/amlg12_x96_max_s905x2 . The arm version.

These are images, not sources

I need sources to build add-ons

**thoradia** · Thoradia Add-ons **thoradia** June 8, 2019 at 3:15 PM

Quote from TNS

Just installed for testing balbes150 image for x96 Amlogic s905x2 with the new 5.0 kernel. Still in its infancy but just wondering if thoradia addons will be supported on the new kernel.

If you tell me where to find the source of that image, I can try to build add-ons for it

**thoradia** · Thoradia Add-ons **thoradia** June 8, 2019 at 3:13 PM

Quote from Madbaires

Hi!

I have LE 9.0.2 Generic/x86_64 and Thoradia repo ver.9.0, how can install last version 9.1 to upgrade sonarr/bazarr/etc

Thanks!

Thoradia Add-ons version 9.0 are for LibreELEC version 9.0.x

Thoradia Add-ons version 9.1 are for LibreELEC version 9.1, eg Milhouse

The versions of the add-ons (Bazaar, Sonarr, etc) are the same in 9.0 and 9.1

In other words: with LibreELEC 9.0x use Thoradia add-ons 9.0

**thoradia** · Thoradia Add-ons **thoradia** May 22, 2019 at 6:37 PM

~~Jackett is now standalone, except for RPi 0 and 1 where Jackett still runs with Mono~~

I have reverted this because of this issue

**thoradia** · Thoradia Add-ons **thoradia** May 22, 2019 at 8:51 AM

Quote from Aciel

Is this what you are asking for?

vl3vwny.jpg

smi8qpi.jpg

No

Go in the settings of the Thoradia add-on, where LibreELEC and Thoradia versions are displayed

Report these versions here, so that I can understand the issue

By the way, Thoradia add-ons for Rockchip are availble here

**thoradia** · Thoradia Add-ons **thoradia** May 21, 2019 at 9:17 PM

Quote from excalibur

I think the Thoradia rtorrent addon breaks the gnu screen (terminal multiplexer) program provided by the official System Tools addon.

rtorrent addon embed its own screen binary in conflict with the system tools binary.

See here.

Thank you for the information

I am rebuilding the rtorrent addon for LibreELEC 9.0 to ship an appropriate screen binary

In the meantime, just remove screen shipped with rtorrent, so that only screen from system-tools is used

**thoradia** · Thoradia Add-ons **thoradia** May 21, 2019 at 7:37 PM

Quote from Aciel

thoradia

Does your Repo and Add-ons works on RK3399? I have installed the Repo 0.0.19 from zip, restarted the device, but when I try to "install from repository " it keep saying "Could not connect to repository". Where on my RPi3, it is working all fine.

SBC = NanoPC-T4 (RK3399)

What versions are reported in the settings of the Thoradia add-on?

**thoradia** · Thoradia Add-ons **thoradia** May 10, 2019 at 5:16 PM

Quote from excalibur

I see that rtorrent has no configuration at all. We have to set it up from scratch.

Maybe you could set it up like it was in OpenElec in old times. That was a great piece of code.

See here.

Improvements are welcome here