Posts by bubblegum57
-
-
-
I don't know if this will work, but I use Zomboided vpn manager, there is an option in that to use a specific vpn for addons
-
I would use Home plugs, wifi over ethernet. I think you need the devices connected to the internet to be able to scrape the artwork to the library.
-
As nobody else has replied
-
Hello all,
sorry for bothering.
I am user of TX3 Pro with spec below :
CPU: Amlogic S905X
GPU: Mali-450
Max. Extended Capacity: TF card up to 32GB (not included)
RAM: 1G RAM
ROM: 8G ROMCan i use TX3 Mini Dual Boot OS (Android & LibreELEC) for my device?
Yes, you install Libreelec to microsd or usb & leave Android on internal. (this is recommended)
you can then either remove the micrsd or usb & it will boot to android, or depending on the skin, there will be boot to internal in the kodi menu
-
Display More
Hello,
To begin I'm french, so please be indulgent
I have install Libreelec on my Odroid C2 and i should to make a video playlist who start on startup.
I succeeded to create my playlist but i can't play it "endlessly" (good word ?)
So, how i can play playlist endlessly
And how to start it on startup (with the last version of kodi) ?
Thank you for your response,
Romain
"endlessly" is ok, continuously ok, play video in a "loop"
There is a setting, for playing a video at startup in Coreelec settings. Not sure if it can be set to play endlessly.
Another option, if you really want to spend time on this is the addon Cinema Vision
-
If you had searched the forum, you might have found this
Choosing a S905 / S905X / S905D / S905W / S912 box guide
or from the Kodi forum
-
Yeah, it's right on top. Unless contrary to the usual forum etiquette there is another thread regarding same topic somewhere else.
This thread is about a feature request, his main problem is here
Billzilla, totally off the wall, how about dual booting your pc with freenas or nas4free?
Or, just buy a NAS.
-
1 - why on Earth won't you share your network setup? It's not LE box. If your hardware is not borked (did you check the cables?) it's an user thing.
3 - don't you think it would need the... network to work properly on the LE box to begin with?Have you been reading Billzilla's main post?
-
Perhaps you should read this Software for creating nfo files
Personally, I don't need nfo files, the scrapper usually get the correct info about the movies.
-
I have a Tanix TX92 box running LE 8.2.4.1 and occasionally I will receive a pink screen at boot. If I power cycle the Tanix box it will be fine. Anyone else experience this issue? This is with a Samsung JS8500 TV.
perhaps this should be asked in the LE 8.2.4.1 thread [8.2.4.1] LibreELEC Kodi Krypton - S912 devices
-
I never clear cache or data. I use Kcleaner every now & again. Any changes are written to the sd or usb.
-
The last stable builds are Krypton from [8.2.2.3] LibreELEC 8.2 for S912
There you will find the build & the device tree your device tree will be based on the ethernet
so probably gxm_q200_2g, but try them all if need be, don't forget to rename it dtb.img
if you want Leia alpha builds you are in the wrong place.
remote might need a remote conf added, which you can find by searching the forum.
as for dual boot, it is not recommended to install over android, just remove the usb to get android
-
After it says it has timed out, "do you want to add this anyway" say yes.
Then reboot,
Then browse to the network you have created.
-
Just to eliminate a drive problem, just format a usb stick, put a movie on it & plug it into each of the usb ports one at a time.
-
Have you tried to use NFS instead of smb?
although you might need to change settings on the pc.
I assume, that the Libreelec ip address is in the same range? 192.168.0.x one of your last pictures shows 192.168.0.8 but in previous posts there seemed to be network addresses with 192.168.1.x
Also check the pc address is not changing
I use a fixed ip address for all of my boxes. I then use nfs, but that is because the movies are on a nas.
-
I think that's what I just posted a heap of photos about.
yes, sorry, I can't quite see, but it looks like your username is librelec not libreelec
