Posts by bubblegum57

Quote from atreidBrano

Hi, wow,

i run pure libreelec and pure Kodi 17,6 (LE-s905_8.2.8.2.3.1+ glx_p212_1g_tx3mini.dtb :-))))

Fhd 1080p worksfine and smooth , lcd display show only time (its OK) but doesn't work remote controller ....

I try other image - 8.2.8.1.9- with gxl_p212_1g.dtb - lcd display show only boot and RC doesn't work .....

Do you have any suggest/idea - how can I fix remote control.

thsx

Display More

read this remote.conf repository also, search the forum for the correct device tree, & also search create remote from scratch

Perhaps if you get no further help, you should buy a blue tooth remote or wireless remote

Quote from erbas

Remote.conf method does not work on kodi 18

the second option I tried,

unsuccessfully

I was just about to edit my reply, I see you are using the Leia nightlies.

Have you tried any of the remote files from the coreelec forum?

LibreELEC 9.0.x Remote files - Remote Controllers - CoreELEC Forums

You never know, one of the other Mecool files might work.

OK, does the version you are using, use the remote.conf method or the

/storage/.config/rc_keymaps

rc_maps.cfg to /storage/.config method?

You could always try Coreelec using a separate usb. The remote is configured differently.

This is the latest stable build [8.2.3.1] LibreELEC 8.2 for S905/S905X

Please read & try before posting back. Install to sd card

try looking at the freaktab forums. For firmware try chinavision

Quote from wilspeak

Hello, I have a Mecool M8s Pro L, and the Rom that I may install says in the beginning description

• This firmware is designed for earlier models of the M8S Pro L with the QCA9377 wireless chipset. If you install it on later (non-LQ) hardware, WiFi and Bluetooth won't work.

How does one find out what kind of wireless chipset is installed on a box? Thank You

I found this [ROM] Mecool M8S Pro LB Stock & Nano Nexus ROM (Android 7.1) - FreakTab

I installed an android app, to reboot-update. Terminal Emulator

details?id=jackpal.androidterm

Quote from gregeeh

Hi all,

Let's just say from the onset I'm really confused about this and I'm very new to Kodi/LE so please be kind with the comments.

I needed to replace my dying PVR so thought I would build myself an HTPC and Kodi looked like a good option. Did some research on a few forums and asked about which hardware I should use. Got the following reply from one:

Plus I've seen S9xx devices recommended on this forum too, so it seemed like a fair enough option.

So I purchased a TX92, installed LE (LibreELEC-S912.arm-8.2.4.1.force.444.10bit.img.gz) and TvH and all seemed fine. I then started to get intermittent reboots after 5-6 hours of streaming live TV plus the occasional random freeze and the logs always ending with "CVideoPlayerAudio::Process - stream stalled". So I hit google and found this.

If you read the thread it is exactly the same problem that I'm getting and on AML hardware. So I asked a couple of noob questions and it seems it's an AML known issue with comments like:

So, if this is an AML issue why would AML products be recommended at all and why don't I see heaps of posts with the same problem?

Is this issue fixable and if so how?

Have I got it all wrong, and if so please tell me?

Sorry about the long post, and TIA,

Greg

Display More

You could always try Coreelec. If you install to a different usb stick, it won't affect what you already have.

Quote from debleblu

Hi bublegum!

Now I realise that I can't get right factory code.

I get different replies depending on button I press:

I'm holding a key on remote and enter dmesg-c in putty and press enter.

Am I doing something wrong?

Display More

It's been a long time since I did this. Did you say you are holding the key? Just press & release, & see what code is produced

& read this again

Create remote.conf from scratch

Quote from debleblu

Hi!

I have use USB keyboard to switch SSH ON.

Then I follow instructions from the beginning of the tread.

Got factory code and codes for all keys.

I made new remote.confg from sample, copy it to configfiles, but still not working.

Getting frustrated....remote.zip

Display More

I can't help anymore.

There is a remote setup for your device using Coreelec LibreELEC 9.0.x Remote files - Remote Controllers - CoreELEC Forums

But, the set up is not the same, remote conf is not used. So you could install coreelec to a different usb, then by reading the instructions there, get your remote working. Post further questions about it, there

Read this HOW TO - Configure a Logitech Harmony Remote for Kodi

also, there was a post on this forum about using the Xios/Pivos config from the Harmony database

Minix u9-H Remote setup for Logitech Harmony

I can't remember if ssh is on by default, & if you are using wifi, that needs setting up.

you have to run this initial config, let it reboot, then put the remote.conf file on the device/usb

My suggestion, is you buy a wireless remote.

when you first installed libreelec, did you turn ssh on? using a keyboard during the initial setup?

Quote from debleblu

I download Putty, but I cant connect to Llibreelec. How to do that?

Thank you for your patience.

open putty, put the ip address in, terminal window should open, log on as root password is libreelec or coreelec depending on what you have installed

I have a NUC running as tvh server, I have created a folder on my device in storage, called TV Logos, I then copied the logos there & in settings PVR/Live tv pointed it to that location.

Quote from debleblu

Hi bubblegu,

I have check creating remote from scratch, but I think it's too complicated for me. I'm more a user, don't know nothing about SSH and similar.

I don't but I had a go.

I turned on my device, I had my laptop next to it, opened putty log in as root, password libreelec. I then typed in the instructions, to stop kodi, then pressed buttons on the remote, & made a note of the codes.

If its too difficult, get a bluetooth remote