Hello,
I do have the same thing. when upgrading to everything higher than 9.0.2 ( incl. Betas) some Remote Buttons (Hama MCE and X10) are not working anymore.
Kaymap editor is useless the buttons are getting not recognized anymore. I don't know what was changed from that point on.
If I downgrade to 9.0.2 every button works again.
Maybe someone can explain what was changed after 9.0.2?
Regards
Nicolas
Use LE 9.2.2 or use the Code in LE 9.2.1... both ways Work.
Regards
Nicolas
Hello!
Right, there is no samba.conf from the beginning. You can create your own Samba.conf. That's why there is a samba.conf Sample To See how to. If you create a samba.conf within configfiles this samba.conf ist getting used.
Regards
Nicolas
Hello!
Since Kodi 18.4 or 18.5 I also had a loud "popp" sound by starting anything music, videos, radio...
To avoid this, I switched: settings>system>audio>keep audiodevice active to "always"
Bay Trails still has problems with CState C6 and/or speedstep.
(Bugzilla.Kernel.org Bug:10951)
If your mainboard has "CPU C State Report" option it is enough to disable CState6
GPU frequency is also affected, since Kernel 5.x (an intel driver bug AFAIK), which sometimes stays low and the video stutters.
You can drop a line into Autostart.sh to keep GPU min freq up if your GPU is affected.
Max. gpu frequency (xxx) eg 750mhz for HD500 700mhz for N3000 etc
echo xxx > /sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt_min_freq_mhzRegards
Nicolas
Hello!
Why not using fixed IP's?
As a temp. fix?
( I had this ones with a faulty Ethernet port/cable)
Regards
Nicolas
I have 4 nuc`s one 3050, one i5 and 2 J3455. Witt the j3455 there are no succés.
I thank you for your help, but we leave it here. I can live With 9.2.0.
kind regards
Rlinsweden
J3455 Nuc does not have the HD Audio DSP option in the Bios.
You have to run the comand via SSH
Take a look at this Link (incl. video tutorial) from the wiki LE WIKI accessing LibreElec
You can use Putty on windows
MacOS and Linux Distros can connect directly
Also an Android device can do this, by using JuiceSSH etc.
Connect via ssh and run this line once, restart, done.
echo "blacklist snd_soc_skl" > /storage/.config/modprobe.d/blacklist-snd-soc-skl.confAFAIK It is a bug in the linux kernel itself, so maybe any new version will have this behavior.
Regards
Nicolas
Nice work!
I notice the kernel version has remained at 5.1.16...
I had been secretly hoping a future version would bring this up to 5.3.0 or higher, as my J1900-based system is occasionally liable to crash as per 109051 – cstates: intel_idle.max_cstate=1 required to prevent crashes - Baytrail
I suppose this won't happen now until a Kodi-19 based release?
Thanks very much again for the great release!
There is a workaround for this if i remember well I used it on my ASRock j1900 and N3700 Boards.
I disabled High Precision timer and Steedstep (some mainboards don't have the "CPU C State Report" option for disabling only CStates), then, later I used a little script that disabled C6 and C7 state.
Regards
Nicolas
Hello Milhouse!
I don't have the "HD Audio DSP" option in the BIOS of the NUC's nor in the BIOS of a Dell and an ASRock Mainboard.
But...
To Blacklist the device worked...
Thank you Milhouse!
Regards
Nicolas
Hello Joe!
I don't have the "HD Audio DSP" option in my NUC's nor in my PC's BIOS.
So I think to blacklist a device I don't have will not solve things here.... WRONG...
To Blacklist the device worked for me as Well!
If you have a NUC or an other device with that behavior you can
1. Disable "HD Audio DSP" in the BIOS
or, if you don't have that option...
2. Blacklist the DSP by using SSH via Putty etc
echo "blacklist snd_soc_skl" > /storage/.config/modprobe.d/blacklist-snd-soc-skl.confThank you Milhouse!
Regards
Nicolas
Hello!
I just updated from LE 9.2.0 to 9.2.1 (x86) on 2 NUC's and one PC.
The Default Audio Device is set to Pulse Audio Bluetooth and is not changeable (grayed out).
1. Is there no ALSA anymore?
2. Is there a way to change the audio device via ssh?
BTW some updated audio visualizers also don't work Spectrum 3.0.3.1 ProjectM 2.3.5.1 all older versions are working nur that's a Kodi thing i guess.
Regards
Nicolas
Hello!
You should provide more informations and a log file I guess.
Regards
Nicolas
You don't seem to understand how NTP works - NTP servers don't know about local time. The whole point is that they provide a standard time (UTC) and can be accessed from anywhere. Local time offset for timezones and optional daylight savings are added by the client.
That said... And why does it change the time if I add a UK, US etc ntp instead of a german one?
Regards
Nicolas
Hello!
You can set a ntp server which offers the right time zone:
serves:
0.uk.pool.ntp.org
1.uk.pool.ntp.org
2.uk.pool.ntp.org
3.uk.pool.ntp.org
Btw that way you never have to care about time changes anymore.
Regards
Nicolas
Hello!
I am using a 1>2 switch (with PSU) since two years and it doesn't power off, so it is on the last two years without problems. It doesn't power off even if the PC is off. I don' t think this is something dedicated to LE... More to the specific switch.
Regards
Nicolas
Hello!
Virus, Maleware.... Etc. Anything could be in a ZIP...
Here is a howto to provide a deglbug log.
Regards
Nicolas
If you want to keep it anyway try to get a NV gforce 610 or 730 gt than it should play anything to HD fine with good quality and Libreelec. But it definatly takes alot power compared to an Intel/Asrock n3700 or q1900 mainboard.
(For both Mainboards you should use two Dimms (Dual channel))
Regards
Nicolas
And set everthing in ACPI to enable (power on by mouse, keyboard, lan, timer by OS, pci, etc).
Regards
Nicolas