Posts by jxt

sorry, I will not show HDR. You need a processor 905D, 905X, 912. And I have 905 ((((((

on the LG TV, only the bt2020 mode works, hdr does not work (((((

Quote from The Coolest

I managed to get my scripts to work. I added 2 buttons to the Movies sub menu, with 8-bit and 10-bit and now I can switch between the two modes almost on the fly.

Pls, share a script

how to transfer buttons on the remote control for FullscreenLiveTV and PVROSDChannels? On firmware 8.2.3.1 in the file keyboard.xml in the item FullscreenLiveTV assigned another function to the menu buttons, ok, left, right. and they worked only in FullscreenLiveTV and how to do it now?

I do not synchronize the time on firmware 8.2.3.1. How to make work synchronize time??

Quote from afl1

In version 8.0.2c kszaq has included internal dvb driver in his builds. There was little change, he replaced my tuner driver (r848) with cracycat69 media_build version. For testing I prepared version with old tuner driver.

LibreELEC-S905.arm-8.2-devel-201708241138-g8c1f5c4-I.img.gz

In this version submitting command lsmod you can can see r848a module.

Code

LibreELEC:~ # lsmod
Module                  Size  Used by
r848a                  34282  1
avl6862               252946  1
8189es               1149087  0
cfg80211              365310  1 8189es
fuse                   80171  2
8021q                  19119  0
aml_fe                  4946  0
aml                    89804  1 aml_fe
dvb_core              102114  2 aml,aml_fe
wifi_dummy               806  0
mali                  198592  5
amlvideodri            12594  0
videobuf_res            5402  1 amlvideodri
videobuf_core          16491  2 amlvideodri,videobuf_res
videodev              148837  1 amlvideodri
media                  25119  2 videodev,dvb_core
dwc_otg               232319  0
fbcon                  37495  0
bitblit                 4484  1 fbcon
softcursor              1184  1 bitblit
font                    7287  1 fbcon

Display More

Thank you very much!!!

With this firmware, all the channels work perfectly! The picture no longer freezes!

Can I do so that would kszaq include this driver in the following firmware ???

Hi afl1

I conducted an experiment.

I made a clean installation of the firmware LibreELEC-S905.arm-8.2-devel-201708221034-g8c1f5c4-I.img.gz on sdcard.

Installed service.tvheadend42-8.2.112e and scanned from scratch dvb-s.

The problem after switching on K1 plus did not dare, it shows 10-15 seconds and the picture freezes. If you reboot K1, then all the channels show excellent.

Then I started looking for a working firmware. Previously, there was no such problem.

Through the libreelec \ update folder, I installed the firmware LibreELEC-S905.arm-8.2-8.1.4.tar (8.1.3, 8.1.2, 8.1.1, 8.1.0 and LibreELEC-S905.arm-8.0-8.0 .2c- I.tar) on all firmware after power on K1 plus the picture freezes. And only after installing the firmware LibreELEC-S905.arm-8.0-8.0.2b-I.tar all the freezes have passed.

On firmware LibreELEC-S905.arm-8.0-8.0.2b-I.tar K1 plus works perfectly.

I think the bug started with the version of the firmware LibreELEC-S905.arm-8.0-8.0.2c-I and still is from the firmware to the firmware. But he was noticed only by me.

How to fix it I do not know

afl1

I did a clean install on the sd card. And I did a new scan of dvb-s

But it did not help.

Then I began to experiment with firmware versions. I managed to find out that this is not a bug tvheadend.

This is bug firmware.

I think that the error started with the firmware LibreELEC-S905.arm-8.0-8.0.2c-I

Tomorrow I can say more precisely

afl1

Has installed on sdcard your firmware LibreELEC-S905.arm-8.2-devel-201708221034-g8c1f5c4-I.img.rz and service.tvheadend42-8.2.112e.zip. Tuned tvneadend, all transoders. Sat channels all show off excellent. Turned out K1 plus. After 20 minutes, turned on and tvneadend no signal. I reboot K1 plus. And all the channels show perfectly. I scribbled two log files. One after switching on. The second after the reboot.

Thanks for your work!

afl1

I did a clean install on the sdcard, did not help.

I made a log. Please see, as it becomes time.

Thank you

Hi afl1

You will no longer collect firmware for s905?

On firmware from kzaq since version 8.1.0 on power-up, tvheadend shows satellite channels (dvb-s2) for 10-15 seconds and the picture freezes. Then there is no signal. If you reboot K1 plus, then all the channels work fine.

On your firmware this was not.

Thank you!

Hi kszaq

Thanks for 3D autoswtich!

Could make the reproduction of BD3D.iso in 3D???

kszaq

Is there any hope that you will fix it BD3D?

Thank you!

Hi friends! Please post on the file changer LibreELEC-Amlogic.aarch64-KI_Plus-7.0.2.004.3.img.gz
This firmware is very necessary! Thank you!

kszaq
Possible to transfer the patch BD3D from Jarvis to Krypton?
Thank you !!!

kszaq, planned to fix 3D and BD3D.iso ??? Thank you !!!

guys who worked standby mode without hanging?

Same problem K1 PLUS internal DVB-S tuner, but after 2017-01-10 build (with updated internal tuner driver) all transponder 36E failed