Posts by Olivastro

As I kept looking for a solution, I found this thread

Thread

[SOLVED] - LibreELEC on Minix NEO U9-H (could not mount LABEL=LIBREELEC_DISK)

WRXTASY EDIT:

Marked as Solved see Post:

[S912] LibreELEC on Minix NEO U9-H (could not mount LABEL=LIBREELEC_DISK)



Hi,

I have been using LE on Minix NEO U1 [S905] for a long time. Everything works great.

Now I bought Minix NEO U9-H [S912] and I have a problem installing LE on SD card.

I found a description of the problem at the Minix Forum. I have the same problem.


dortmunder wrote:

[…]

Minix Forum

I tried 3 different SD cards:

32GB Samsung EVO plus

32GB ADATA

8GB Kingston

Same error for all.

Could you help…

bit4freak

October 26, 2017 at 2:27 PM

There is talk of another hardware, but certainly also of the same problem and perhaps a possible solution. I don't know anything about programming so I have no idea how to do it ... Maybe here in the forum some expert reading that is able to solve the problem I posed. I hope...

In the meantime I tried OSCM on an old very slow micro sd (2Gb), but ... it works! I was also able to configure some addons that I use with LE. But above all the adapter that allows the two microsd one for LE and the other for Volumio works very well.

I am afraid that the "problem" lies with LE.

If no one can fix it, at least I'll have a good alternative.

In the meantime I tried OSCM on an old very slow micro sd (2Gb), but ... it works! I was also able to configure some addons that I use with LE. But above all the adapter that allows the two microsd one for LE and the other for Volumio works very well. I am afraid that the "problem" lies with LE. If no one can fix it, at least I'll have a good alternative.

I tried with BerryBoot, but I ran into two problems. The former does not allow you to load the original software and still has problems with updates. In any case, I completely lose the ability to use the remote control so if I don't have to put in and remove the card I have to use my mobile phone as a remote control and it's worse. Meanwhile, a second adapter has arrived sent to me in case it was a failure of the first one, but it behaves exactly like the other one. I keep wondering what the message that appears means and how you could solve the failure to load the card (I repeat that if I remove it from the adapter it works fine!

Help me!

Hi, on a Raspberry pi4, 2MbRam, I use Kodi from LibreElec and Volumio.

I got tired of taking out and putting in the two microSD cards every time.

I tried to do a multiboot, but it is inconvenient for a variety of reasons (the remote control no longer works , the versions of the respective ones have updating problems ...

I thought about buying an adapter that mounts both cards by inserting it into the Rasperry. Convenient because with a microswitch it allows before turning it on to select which OS to start. Volumio works very well, but the card with Kodi does not load it, the splashscreen appears and then complains about the inability to mount the card ...

Does anyone have the same adapter? How are you? Have you had problems?

Thanks

Quote from Olivastro

LibreElec starts the splashscreen and then returns:

"error in mount storage: mount_common".

Quote from chewitt

If you use cards on their own, they both work. If you use the adapter, one of the cards does not work. The non-working card changes when you swap them around (i.e. the slot is bad, not the card). Thus .. either the adapter is bad (as one of the slots will always be non-working) or that kind of adapter simply isn't supported. In either case, I'm not seeing an LE problem here. You could use PINN or NOOBS if you want to have multiple OS booting from the same card.

I didn't explain myself well: if I swap the cards on the adapter, only the one where Volumio is installed always works. In this way, in fact, it turns out that always and only the 32Gb card does not work. I deduce (am I wrong?) That the adapter works. After all, the splash screen of LE appears, so the card is read! Only, once the splashscreen appears, it does not continue loading and the error appears at the top right of the screen as already explained. Sorry if I insisted, but it seems to me that I have not explained myself well.

I just arrived in this forum, greetings to everyone

I have a problem after buying a card that allows me to mount two micro SD cards on the raspberry: one with Volumio and the other with LibreElec ver. 10.01

Volumio booting works fine, LibreElec booting does not.

Volumio fits on an 8Gb card, LibreElec on a 32Gb.

If I invert the two micro SD cards in the adapter card, the same thing happens!

LibreElec starts the splashscreen and then returns:

"error in mount storage: mount_common".

The same microSd with LibreElec works great if I insert it directly into the Rasperry

I think the adapter card has no problems because swapping the two cards one always works! I think the problem is not the card where LibreElec is because without an adapter it works!

I ask you for help. Maybe I should start over with LibreElec copied to the 32Gb card as now to make it expand already inserted in the adapter card I bought?