Posts by JohnWayne111
-
-
I don't know how long i've been playing with the whitelist without any progress.
On thing i noticed is that on the PI 3 i can choose 23.98 Hz and 24.00 Hz.
On the PI 4 there is only 24.00Hz.
Actually I think the PI 4 doesn't support 23.98 Hz properly yet.
No, Pi 4 support 23,98.
Did you connect via Receiver or directly to your TV ?
-
Hi,
thanks for the fast replay!
I force an update ob LE Addons today at the evening and hope
-
Hi all,
yesterday a new version of inputstream.adaptive was released (2.4.4)
This version is required to play the new Disney+ Addon.
The current version in LE Repo is 2.4.3.1
It is forseeable when 2.4.4 is available ?
Thanks in advance !
-
-
-
HAHA NICE !!!! It works in my case !
Set the settings from 64 (default) to 512 all netflix videos working finde with internal grabber.
try also 4k 60 Hz videos - this will not work.
I also try 1024, 2038, 4096 settings. Still buggy with 4k 60 Hz.
But - more important - that now netflix works with 1080p
THX A LOT!
-
In my opinion all 1080p with SW Decoding and a framerate over 24 Hz will end in frame drops.
In addition to that ... i try a local file H265 with 60 Hz and internal grabber - same signal drops! If i change to external grabber - no problems!
Crazy!
But let me pls know if you have a workaround! I will test it too
-
-
Thanks! Yes, was 2 Ghz overclocked.
Diable and iupdate was fine
Edit1:
wit this it works fine (after update 18.6)
# Ambilight Modul aktivieren
dtparam=spi=on
# mehr USB-Power
max_usb_current=1
# Overclock
# over_voltage=4
# arm_freq=2000
# 4k Ausgabe
hdmi_enable_4kp60=1
Edit2:
Overclocking is working with 190 Mhz - LOL !
With LE 9.2.0 - 2000 Mhz OK
With LE 9.2.1 - 2000 Mhz Kernel error
With 1950 it works ok now.
-
-
-
-
-
-
Hi all,
will there be another LE Version based on Kodi ?18.6?
Or ist Kodi 18.5 final release and netxt version absed up on Kodi 19 ?
Thanks in advance
-
I've just watched Disenchantment S02E01 from netflix at 1080p24 with hyperion active on a RPi4 4GB and didn't notice and screen dropouts or other issues. So not quite sure what might be going wrong on your setup.
A rather common cause for screen blackouts, especially with CPU demanding content like software decoded video or power demanding peripherals like USB HDDs or DVD drives are marginal power supplies - if you're not using the official RPi power supply (I use that here and it's fine) or if you have one or more bus-powered USB HDDs you might look into that.
So far I'm only aware (and can reproduce) 2 major issues with Hyperion (more specifically the dispmanx grabber):
4k playback with the dispmanx grabber / Hyperion active results in no signal on the HDMI output. There's currently no workaround or solution available, reason for that seems to be that the RAM bandwidth is just too high. This is a known issue and it will be fixed eventually (but seems to be a bit low priority - it needs to be fixed in the RPi firmware so not much we can do about it).
The other issue I frequently see here is no HDMI signal at all after a cold boot (on my 4kp60 screen) if Hyperion is active. A simple workaround for that is to start Hyperion after Kodi has started, I'm using a simple systemd drop-in here to do that:
.config/system.d/service.hyperion.service.d/delay.conf
Not exactly sure what causes the no-signal issue (could be something in the firmware), but with the drop-in workaround everything's been fine here in the last weeks.
so long,
Hias
In which folder must the dely.conf?
I dont have .config/system.d/service.hyperion.service.d/
Maybe that?
/storage/.kodi/addons/service.hyperion/system.d
-