Posts by waschbaerbauch75

waschbaerbauch75 · Rpi4 ambilight hyperion waschbaerbauch75 November 30, 2019 at 11:07 PM

Mitch7391 i don't know - i only have WS2801 and WS2812b, so i can't test..

waschbaerbauch75 · Rpi4 ambilight hyperion waschbaerbauch75 November 28, 2019 at 2:26 PM

Hi folks!

Just take a look into this thread RPi4 1GB + LibreElec 9.1.002 + Hyperion Lights = no lights

In the first (edited) post you may find the solution for the initialize problem.

Thanks for the information to RPi + LibreELEC - RPI 4 Unable to initialize ws281x library. | Hyperion - Forum

I had to replace the binary hyperiond in location /storage/hyperion/bin

waschbaerbauch75

Da Flex sorry for the late reply, the solution is already in my first (edited) post. The binary hyperiond had to be replaced.

waschbaerbauch75

Thanks for the replies, but Da Flex that didn't work here with my RPi4, so i went the hyperion forum during my research with the binary which works like a charm.

HiassofT currently it's working perfectly, but thanks for the hint with the Hyperion addon from the LibreElec repository.

I'm very curious, so i will test your way too today

Thanks

Mario

PS: Ok i tried to figure it out here without success. I removed everything vom Hyperion (addon and Hyperion ssh install).

Installation from LibreElec repository was okay and i exchanged the configuration at the path:

Code

/storage/.kodi/userdata/addon_data/service.hyperion

with my configuration file 'hyperion.config.json'-

The result was/is: No function - no effect while startup - Hyperion remote on Android is unable to connect to the server. I think the service is not successfully started here. Maybe this is related to i'm using WS2812b (PWM at GPIO18 - Pin12) instead of WS2801.

waschbaerbauch75

Hello,

i have a problem to get my hyperion lights up and running:

Hardware setup is:

RPi4 1GB - Armor case with 40x40x20 cooler

WS2812B (5V white PCB)

Power supply 5V 30A

I'm able to connect with the HyperCon configuration program:

Code

ssh connected
ssh out:     cd /tmp && curl -# -k -L --output install_hyperion.sh --get https://raw.github.com/hyperion-project/hyperion/master/bin/install_hyperion.sh && sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
ssh out:     #=#=#                                                                         
ssh out:     ##O#- #                                                                       
ssh out:     ##O=#  #                                                                      
ssh out:     ######################################################################## 100.0%
ssh in:     *******************************************************************************
ssh in:     This script will install/update Hyperion Ambient Light
ssh in:     Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in:     *******************************************************************************
ssh in:     ---> Stop Hyperion, if necessary
ssh in:     ---> Downloading the appropriate Hyperion release
ssh in:     ---> Downloading Hyperion OpenELEC/LibreELEC release
ssh out:     #=#=#                                                                         
ssh out:     ##O#- #                                                                       
ssh out:     ##O=#  #                                                                      
ssh out:     #=#=-#  #                                                                     
ssh out:     ######################################################################## 100.0%
ssh out:     ######################################################################## 100.0%
ssh out:     ######################################################################## 100.0%-#O#- #   #                                                                   
ssh out:      -#O#-  #   #                                                                 
ssh out:      -=#=-#  #    #                                                               
ssh out:      -=O#- #   #   #                                                              
ssh out:      -=O=#  #    #   #                                                            
ssh out:     ######################################################################## 100.0% -=O=-#   #   #     #                                                         
ssh out:     #########################################################                 79.6%
ssh out:     ######################################################################## 100.0%
ssh in:     ---> Downloading Hyperion OpenELEC/LibreELEC dependencies
ssh out:     #=#=#                                                                         
ssh out:     ##O#- #                                                                       
ssh out:     ##O=#  #                                                                      
ssh out:     #=#=-#  #                                                                     
ssh out:     ######################################################################## 100.0%
ssh out:     ######################################################################## 100.0%
ssh out:     ######################################################################## 100.0%-#O#- #   #                                                                   
ssh out:      -#O#-  #   #                                                                 
ssh out:      -=#=-#  #    #                                                               
ssh out:      -=O#- #   #   #                                                              
ssh out:     ######################################################################## 100.0% -=O=#  #    #   #                                                            
ssh out:                                                                                0.2%
ssh out:     #                                                                          2.6%
ssh out:     ###########                                                               15.7%
ssh out:     ######################                                                    30.6%
ssh out:     #################################                                         45.9%
ssh out:     ##############################################                            64.2%
ssh out:     ############################################################              84.4%
ssh out:     ######################################################################## 100.0%
ssh in:     ---> Adding Hyperion to OpenELEC/LibreELEC autostart.sh
ssh in:     ---> Starting Hyperion
ssh in:     *******************************************************************************
ssh in:     Hyperion Installation/Update finished!
ssh in:     Please download the latest HyperCon version to benefit from new features!
ssh in:     To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
ssh in:     Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
ssh in:     *******************************************************************************
sftp Send Hyperion Config - Sourcepath: C:/Users/Mario/Documents/Hyperion_UE55F8590, Targetpath: /storage/.config/, Filename: hyperion.config.json

Display More

After sending the configuration i get the message:

Code

ssh in:     Hyperion Ambilight Deamon (630)
ssh in:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
ssh in:         Build Time: Aug 25 2019 10:39:29
ssh in:     ERROR: No valid config found 
ssh out:     /storage/.config/autostart.sh > /dev/null 2>&1 &
ssh out:     cat /storage/logfiles/hyperion.log
ssh in:     Hyperion Ambilight Deamon (648)
ssh in:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
ssh in:         Build Time: Aug 25 2019 10:39:29
ssh in:     INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in:     HYPERION INFO: ColorTransform 'default' => [0; 227]
ssh in:     HYPERION INFO: ColorCorrection 'default' => [0; 227]
ssh in:     HYPERION INFO: ColorAdjustment 'default' => [0; 227]
ssh in:     LEDDEVICE INFO: configuration: 
ssh in:     {
ssh in:         "colorOrder" : "rgb",
ssh in:         "leds" : 228,
ssh in:         "name" : "UE55F8590_WS2812B",
ssh in:         "type" : "ws281x"
ssh in:     }
ssh in:     whiteAlgorithm ::
ssh in:     Unable to initialize ws281x library.
ssh in:     terminate called after throwing an instance of 'int'
ssh in:     Aborted

Display More

Is this problem LibreElec alpha related on RPi4 or is there a problem with the hyperion sources?

Thanks in advance for help

Mario

PS: Okay it seems this is a problem which is hyperion related.

Here you can find a binary which at least initializes

waschbaerbauch75 · LibreELEC (Leia) 9.1.002 ALPHA waschbaerbauch75 August 28, 2019 at 11:25 PM

Quote from milhouse

advancedsettings.xml is working fine (41,000 users can't all be wrong!) and if it's not working for your then you've probably made a mistake somewhere, or something else isn't working as expected, in which case please post your kodi.log as this typically reveals the underlying issue.

If you're not able to connect to a MariaDB server from LibreELEC then enable "Wait for network before starting Kodi" in Settings > LibreELEC > Network > Advanced Network Settings - this is a common issue as Kodi frequently starts before the network has been brought up.

Thank you very much - this did the trick for me

waschbaerbauch75 · LibreELEC (Leia) 9.1.002 ALPHA waschbaerbauch75 August 27, 2019 at 11:32 PM

Good evening, is there a cause/reason the advancedsettings.xml will not work?

Tried with a raspex version/image (kodi 18.3 Git:20190718-b0e4133d0f) and my mariadb is able to connect.

For the w0man acceptance factor i would prefer the libreelc image instead

regards

Mario