t trying a different HDMI cable
I have to buy it first, as I have only one cable, as I use my Raspis headless
Posts by PackElend
-
-
PSU is ksa-15e-051300he
3A 15.3 W
OSMC and RaspiOS boot well and are usable
I got another sdcard and will flash that one
I ll try to get the other logs and do the checks
I have 8gb raspi 4, will check it
Problem with only hdmi is that is stops at kernel time sync, see OP no chance to interact with
Thx so far for all the help
-
pastekodi -c >my.log
no chance but
"journalctl | paste"
worked.
I don't know if it makes a difference if the TV is off during boot but as I switched it on, no image was coming up, so I booted it again with the TV on for a short while.
- ix.io/4izB TV was off
- ix.io/4izI TV was on until roundabout 09:56:45
if there is nothing in the logs that tells something I continue with #12
-
Did you have any success with that.
have not tried yet, was not at home yesterday, will try today
-
Also make sure your RPI4 has the latest firmware.
so I shall run rpi-eeprom-update from Raspberry Pi 4 Firmware Update: All You Need to Know | All3DP (Raspberry Pi Documentation - Raspberry Pi hardware)?
Or only
Codesudo apt full-upgrade -
that was done a few days ago, have check the OP, point 3 and 4
-
-
-
LibreELEC.USB-SD.Creator.Win32.exe downloaded LibreELEC-RPi4.arm-10.0.3.img.gz so you want me to install version 10.0.4?
Where di I find it?
There is nothing in
- Releases · LibreELEC/LibreELEC.tv (github.com)
- LibreELEC Raspberry - LibreELEC
- LibreELEC official nightly builds
and could you share how to retrieve the logs?
-
-
Hello,
I'm very new to LibreELEC and Raspi.
I tried to install LibreELEC on a Raspberry 4 4 GB with an SD Card but it fails to boot.
- Raspberry Pi OS using the same type of SD Card
- Boot fails on SD Card and USB
- Only Mouse, Keyboard, Ethernet and HDMI are connected, it get stuck at:
Reached target system time synchronized
similar to boot - Debian 10 stopped on reboot after "Reached target system time synchronized" - Super User - Booting with HDMI only, it get stuck at:
A start job is running for Wait Until Kernel Time Synchronization - Hardware: Raspberry 4 Model B Rev. 1.4
- Original RPi HDMI Adapter and Power Supply
- OSMC runs on it
I do have problems debugging as I have difficulties how to generate or read the (right) logs
It begins with the change of config.txt and cmdline.txt.
Thx to LibreElec boot from USB – Error after upgrading | coeleveld.com and Übersicht für config.txt und cmdline.txt? - Raspberry Pi 3 - Deutsches Raspberry Pi Forum (forum-raspberrypi.de) I was able to get the log shown on the screen and ssh access.
Config.txt - LibreELEC.wiki is not much of help and pastekodi as mentioned in Log Files - LibreELEC.wiki does not runHow shall I proceed here to find the reason?
Doing anything as mentioned (even if not directly related) in:
Problems after update 10.0.2 > 10.0.3: Image on boot, CEC, GPIO DAC - Bug Reports - LibreELEC Forum
[RPi4] [LE 9.2.6] Stuck at boot - General Support - LibreELEC Forum
RPi 4B LibreELEC stuck on splash screen - General Support - LibreELEC Forum
is not improving the situation
-
Logs are below.
can you share how you generated the logs as I got stuck as well
-
does anyone runs it on a ROCKPro64?
-
If I go through
Early mainline images for RK3288, RK3328 and RK3399
feedback for test build LibreELEC-RK3328
some of the issues are resolved, aren't they?
-
does LibreELEC-RK3328 also improve LibreELEC-RK3399 as there isn't a dedicated LibreELEC-RK3399 thread comparable to this one here.
