Posts by b_ignatov

  • LibreELEC 8.x images for additional dvb drivers

    Quote from CvH

    I have no knowledge if the drivers are broken or if they just don't work at some architectures.

    Alternatively get some Digibiot R1 or Xoro 8100 and just plug it into the network. There are no drivers needed and they "just work".

    I hope that someone has exactly the same working tuner with Amlogic device :)

    I was thinking about network tuner as Digibit R1, because I've seen your posts somewhere here in the forum that works flawlessly with Libreelec and TVHeadend.But the problem is that I need tuner mainly for Cable(DVB-C) and Antena(DVB-T/T2), because I have no dish yet.Just leaving an option for satellite, because after couple months I'll moving in new home with perfect "dish" view

    Thanks for your help again.

  • WebGrab+Plus

    Exactly the same one with Libreelec 7.0.3.12j.I also configured to start after 30 seconds, but It doesn't even create a log file to see the issue. As I said couple posts before.... with Libreelec 8.2 everything works great with v2.1.5 but I prefer Libreelec 7

  • Can't save Tvheadend recordings to NAS

    Quote from CvH



    Adding vers=1.0 might do the trick if you router (very likely) only support the EOL samba version that nobody should use today.


    Thanks to you and this topic, I've already done it and everything works perfectly.My .mount file looks like:

  • WebGrab+Plus

    Hello,

    I have updated my WG from 1,57 to 2,15!As I already knew...xmltv_time_correct.exe has been removed from this version.I really need this program to correct my local EPG.Can someone help me with after.sh scrip to call the program after WG finish the job?I have downloaded the program and copied all the files in webgrab' folder in LibreELEC.Now I have to create after.sh file and then.......??

    Thanks in advance :)

    I am done :)

    Just created after.sh without any rights and permissions, then put this one in it.

    Code
    mono xmltv_time_correct.exe guide.xml tvguide.xml

    Everything works great.

  • [8.2.2.3] LibreELEC 8.2 for S912

    Quote from b_ignatov

    Hello everyone,

    I have a issue with my friend's Beelink G1 (not ultimate) S912 box. The device is with 2GB of RAM, 16GB internal storage and 1Gigb Ethernet adapter. I run this build and everything works great except the Ethernet port. I've tried all devices tree, even and default one as I tried to delete it from the SD card with the same unsuccessful result. I saw that nobody has the same problem with this box. I'll be very happy if someone knows where the problem is.

    Thanks in advance and good day to you guys. :)

    Quote from kszaq

    No etehernet means that you should try q201 device trees.

    Everything is OK write now.I had a strange issue with my Mirco SD to SD adapter.After replacement my network connection is OK even with the default dtb fail.

    Thanks again kszaq........you are GREAT man.

  • [8.2.2.3] LibreELEC 8.2 for S912

    Hello everyone,

    I have a issue with my friend's Beelink G1 (not ultimate) S912 box. The device is with 2GB of RAM, 16GB internal storage and 1Gigb Ethernet adapter. I run this build and everything works great except the Ethernet port. I've tried all devices tree, even and default one as I tried to delete it from the SD card with the same unsuccessful result. I saw that nobody has the same problem with this box. I'll be very happy if someone knows where the problem is.

    Thanks in advance and good day to you guys. :)

  • remote.conf repository

    Quote from yaqwa


    can someone help me with this Remote?
    It has a stop, a kodi and a play/pause Button and i do not know how to get it working on libreelec.
    It is a x96 Android Box.

    On android the kodi button is the stop button and vice versa - so i need all 3 please.

    I've got the same one.Just use the remote.cnfg for X96 from the repository in post #4

  • s905 - hdmi handshake /color space problem with older TVs

    Thank you for the great solution!!

    I am so happy that I fixed my problem too, but I have a question.

    If I have 2 commands in my autostart.sh, how to separate them?I have a command to mount my NAS to my Android Box and another one to fix this issue.My autostar.sh looks like that, but I'am not sure that the second command is OK

    Bash
    #!/bin/sh
 ( mount -t cifs -o username=root,password=libreelec,rw //192.168.0.1/home /storage/recordings;
 echo 1 > /sys/class/amhdmitx/amhdmitx0/output_rgb
 ) &


    Thanks in advance.

  • WebGrab+Plus

    I think that if you edit your ini fail's time zone with an hour and use media portal.xml everything should be OK.
    If you don't have any trouble with your drivers in 4.2 just try it out.I think that the problem is that your TVHeadend version doesn't read the offset prefix in xml file. That's why you should use media portal.xml. In this file the prefix is added in start / stop programme time.
    Good Luck.

    Sent from my OnePlus 2 using Tapatalk

  • WebGrab+Plus

    Try to add another channels from the same source (ini fail).Some times the EPG is cached somewhere in your system. If you're using Kodi TVH Client, just clear data cache before testing. System => TV => Clear data and cache. Also after Webgrab is done with your xml file don't forget to restart TVHeadend.

    Try to check EIT Time offset as well.

    Sent from my OnePlus 2 using Tapatalk
    [hr]
    Another try!

    1.Use the ini fail with - 0500 time zone.
    2.Leave EIT time offset unchecked(as it was)
    3.Use mediaportal.xml file instead guide or guid_wgp
    May be TVHeadend doesn't read - 0500 correct.

    Sent from my OnePlus 2 using Tapatalk