Posts by b_ignatov

Quote from SirRob24

I tried the newer versions and it's the same thing. I hold the reset button with a toothpick and plug in the power and it doesn't boot up anything, only takes me to the Android System Recovery screen where you can reboot system, apply update, or factory reset the box.

The same thing with my MX Pro S805 box......just take me to the same Recovery mode.

I can't even boot the stock Android now.My next step is to try booting AlexELEC or Armbian's balbes150 builds

Hi there.

I also dug up a box that has been collecting dust for three years and I'm trying to give it life. Mine is an MX Pro with Amlogic S805. It also can't boot from mSD card but I use newer images. Why don't you try them?

[8.2.3.1] LibreELEC 8.0 for S805

Read the instructions carefully, how to boot by toothpick method.

I am also wondering.

What about this release for Wetek Hub? Is it with the new kernel or still 3.14?

Quote from chewitt

You need to change the path to the ffmpegx location. Just (re)read this thread.

Quote from CvH

this just works if your playlist is manual created, the majority is just some url that get updated

a "proper" (in terms of workaround) fix ffmpeg: add compatibility script by CvH · Pull Request #3163 · LibreELEC/LibreELEC.tv · GitHub to add the possibility to use standard linux paths

I solved my issue with the following steps :

First I installed ffmpeg-tools. Then just wrapped and insert my url streams in tvheadend like this

pipe://ffmpeg -v fatal -i http://my/stream -vcodec copy -acodec copy -f mpegts pipe:1

Everything works flawlessly.

Hi,

I would like to ask how can I use ffmpeg in TVHeadend with PIPE?

I need to insert my URL stream like this one, but does not work for me.Do I have to change the path for ffmpeg or something else?

pipe:///usr/bin/ffmpeg -loglevel fatal -i http://my_stream -vcodec copy -acodec copy -f mpegts -tune zerolatency pipe:1

Regarding your Mini M8S box!

Did you try to flash your Android back using USB Burning Tools program?

For this task you need the following staff :

1.Male2Male USB Cable.

2.The stock Android image for your Mini M8S box.

3.USB Burning Tools installed.

Just create this folder and everything will be OK.

Quote from crazycat

Hauppauge WinTv HD dual tuner support same as mainline media_tree

I don't understand what actually you mean, but the tuner does not work properly when you use both tuners. It shows continuity errors, which is not the same when I use the tuner on my laptop with Ubuntu 16.

Quote from crazycat

Look like need recompile drivers addon

Dear crazycat

If you are going to recompile the drivers addon, can we expect any improvements in Hauppauge's drivers in old kernel 3.14?

I ask especially for Hauppauge WinTv HD dual tuner.

How are you trying to scan your channels? You mentioned over DVB-C with coaxial cable inside you tunner. If so....do you know the frequencys of your cable TV provider?You should insert them when you create you muxes.

I don't need to backup my data. I just need install to internal.

Hi

I also want to update from old kszaq build v 7.0.3.012j to official one Libreelec v8.95.3. on my Wetek Hub

Can I perform this as I put official LibreELEC image in .Update folder? I would like to do it this way because the old Libreelec is installed to internal and just want to update it with the official one and run from internal again. If I prepare the official image to mSD card, then "installtointernal" script is missing, and I'm not able to install on internal. That's why I think that the only way is to update the old libreelec internal version with the new one without perform installtointernal command.

Am I correct

Dear Hauke

Finally my Hauppauge Dual tuner arrived.

I tested it on my Wetek Hub with the final official release 8.95.3. Strange for me that is still with kernel 3.14

Unfortunately I have the same issue like yours. When I watch a channel from first tuner there is no continuity errors and everything works flawlessly. When I start to watch 2 different channels from 2 different frequencies, tvheadend shows continuity errors on both tuners.

The good news is that these errors do not affect my watching with drop frames and pixelization.

I prefer to stay on official LibreELEC and hope that this little issue will be fix very soon.

Thanks for your quick info.

Could you please explain which kszaq's build version exactly you run? My Hauppauge Dual tuner arriving today and I would like to try it with proper drivers.

Thanks in advance.

Quote from Hauke

Sorry to say, but I was a bit too fast with my assessment. It is *nearly* flawless. The continuity errors on receiver 2 are gone, but funny as it is, now receiver 1 has occasional continuity errors, but very few. Changed the receiver priority in tvheadend so that receiver 2 is default - fine for the moment. Seems I have to wait for mainline kernel after all

Did you try the newest LibreELEC (Leia) v8.95.2 BETA?

I am going to generate another file for this remote when I have a free time. And then I'll post it here.

Black and orange.