Likely itcould be done with docker, but no experience with Jeedom if this works or not.
Posts by CvH
-
-
can you grep an dmesg output ?
-
there is none in Kodi itself, so currently no
you can ofc run an LIbreELEC fork with included Emualtorstation and whatnot
-
be aware that auto update to 9.2.1 was hold back due an bug we found and finally fixed at 9.2.2
-
not yet, lack of my time prevented it
-
I'm testing a H3 Nightly test build but still no working addon.
pls share a kodi log, not sure what you mean if you say "don't work"
are there no addons or are there addons and they don't install or do they not start etc ??
we have dedicated h3 addons for the latest version and it should work, maybe an addon repo forced update may help too
-
have installed LibreElec in Pine64 RockPro64 board.
The wiki ( Raspberry Pi Config.txt [LibreELEC.wiki] ) is clear but in /flash I can't find config.txt:
the config.txt is just for the RPi, nothing else supports it
-
Pls wait till 9.2.2 has arrived (around tomorrow), this includes a fix for the Intel Nuc or you may have no audio without manual interactions.
Available versions should show 9.2.1.
Due the bug I mentioned we have not yet activated autoupdate for 9.2.1 so this can't work at the moment.
The easy and simple solution is to download the file manually from our site and put it into the update folder like described Update LibreELEC [LibreELEC.wiki] here (Samba Share). After a reboot you should have an updated LE.
-
If the SD is to blame, the wear has to be terrible considering my set up was mostly read only
Depends at the SD card, we have here (company I work for) a lot cheapo SD cards (at real RO mode) and they are dying absolute randomly.
1 Day or 3 Years, everything is possible including very strange behaviors.
-
I could find this emulator in Kodi: "Sega - Saturn (Beetle Saturn)", but not in Libreelec.
Kodi retroplayer doesn not support it yet, it requires OpenGL that is not working at retroplayer yet, same for N64 etc.
-
That sounds VERY strange in general.
Btw you won't get "latest" firmware via LE Settings just what we have bundled.
You can boot up an Raspbian and update there. Not sure this will help.
I tried to use yesterday 9.2.1 and didn't get tvheadend client working at all. on 9.2.0. it was.
this is working in general
Maybe worth a look is also SD card and power supply. If you have the opportunity switch both.
Maybe, maybe not.
Little puzzled for this one: `temps` = temp folders?
temperatures
-
so I've left it at that.
just saying, that also mean that you likely could never update again without loosing your remote
Unfixed problems usually don't fix itself.
-
I already saw that >30m cables are much more likely to fail at different hardware.
So I would at least for test purposes switch back to your old cable and see what happens.
Also we are talking here about an RPi 0-3 that is known for it not optimal network connection. Even if it works with a laptop etc it might not work with an RPi.
-
If you ask me it looks like there is no reception. Now starts the fun part, why is there no reception.
1. check connections to antenna
2. If the signal drops out do a quick reboot and check if it works again, if not we can rule out software problems
3. look at the temps and do the firmware upgrades for the RPi if not done already
-
Why do you tar backup at all and don't use rsync for the whole folder? Rsync just works and is much faster.
-
I just deployed this version and struggled for quite a while trying to install a specific game emulator.
we have all emulators bundled for every hardware platform we support, so likely you want to install an emulator that is not supported at Kodi/LE ?
-
could you share the log from Tvheadend ? (at the userdata folder of Tvh)
-
tx for the hint, we have a look
