Posts by Da Flex

Quote from Jusic

However this issue is definitly not addon related so it sounds like a lame excuse to me.

It's not an excuse, it's a condition. Forum rules say that you will not get any support, if you use banned add-ons.

"When the TV is switched off" should be set to "Ignore".

If this doesn't work, you can set a fixed HDMI mode at cmdline.txt. Examples here and here.

Thanks for checking the cable. The default whitelist seems to be complete, but the TV is sending wrong refresh capabilities after being re-enabled.

I suggest to go into the "CEC Adapter" menu at LE's input settings. There is a setting, which keeps HDMI signal always on, even if the TV gets switched off. If you activate this setting, then hopefully no HDMI negotiation happens when TV comes back.

busfahrer303 Seems like the 60Hz mode isn't part of the whitelist:

2022-03-13 22:12:23.193 T:975      INFO <general>: [WHITELIST] Searching the whitelist for: width: 1280, height: 720, fps: 25.000, 3D: false
2022-03-13 22:12:23.195 T:975      INFO <general>: Display resolution ADJUST : 3840x2160 @ 25.000000 Hz (29) (wei-CENSORED-WORD-ght: -726778399819647164797157376.000)
2022-03-13 22:12:37.505 T:975      INFO <general>: [WHITELIST] Searching the whitelist for: width: 1280, height: 720, fps: 25.000, 3D: false
2022-03-13 22:12:37.507 T:975      INFO <general>: Display resolution ADJUST : 3840x2160 @ 25.000000 Hz (29) (wei-CENSORED-WORD-ght: 0.000)
2022-03-13 22:12:40.983 T:975      INFO <general>: Loading skin file: VideoOSD.xml, load type: KEEP_IN_MEMORY
2022-03-13 22:12:42.663 T:975      INFO <general>: CVideoPlayer::CloseFile()
2022-03-13 22:12:42.664 T:975      INFO <general>: VideoPlayer: waiting for threads to exit
2022-03-13 22:12:42.668 T:1126     INFO <general>: CVideoPlayer::OnExit()
2022-03-13 22:12:42.668 T:1126     INFO <general>: Closing stream player 1
2022-03-13 22:12:42.668 T:1126     INFO <general>: Waiting for audio thread to exit
2022-03-13 22:12:42.669 T:1134    ERROR <general>: Got MSGQ_ABORT or MSGO_IS_ERROR return true

Do you use an HDMI 2.0 or 2.1 cable? If you are using a lower HDMI version cable, it's possible that the whitelist is incomplete.

PS: Whitelist AFTER re-enabled TV is wrong:

Feb 02 16:29:47.632820 LibreELEC kernel: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1]
Feb 02 16:29:47.632865 LibreELEC kernel: [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

Quote from GORBULAN

I can SSH into it. I wonder if there are commands I can use so I can figure out where it is erroring.

PS: Activate debug logging (level 2) on advancedsettings.xml (file has to be manually created), if you can't access the GUI.

Quote from libreelekuer

Rpi 4 not handeling vp9, specially when Goolag and others favor it, seems like a bit let down.

Goolag? Which service has VP9, but not H.264 or HEVC?

Hmm, I don't see any Samba errors. It has some server errors from "IPTV Simple" add-on, but I don't think that slows Samba down (you can deactivate that add-on for another test to be sure).

You can post smb.conf, but I'm not familiar with Samba, so that's just for other users.

Quote from Jmla

Currently with LE11, the picture is too light, with no real blacks or contrast.

Can you have a look at LE's video settings? I heard some users have the same resolution / refresh rate multiple times, and just one version has the right contrast.

Did you also read this thread?

pastekodi can take some time when the log is large. Instead you can also copy & paste into the Pastebin website.

Quote from FUEL4EP

Here the kodi.log:

kodi.log

2022-03-09 19:33:20.747 T:1084     INFO <general>: Disabled debug logging due to GUI setting. Level 0.

• remove the typo (<cache> as last line)
• set readfactor to 20
• reboot

config.txt looks fine. I think you have to increase the buffer size at advancedsettings.xml.

Quote from chewitt

You shouldn't need to fiddle with GPU memory defaults; they are set correctly by default.

It's very rare, but sometimes higher GPU memory seems to fix things: RE: File where Video does not play, Audio does.

libreelekuer Get the 4GB version of RPi 4B. Then you can increase GPU memory at config.txt, if needed for codecs, buffering etc.

Try gpu_mem=128 at config_txt. Because you have the 4GB RAM version, this shouldn't cause any trouble.

We should dig deeper then. Activate debug logging and reproduce the issue by copying a file: