any news for support "HLG" for DVB Addon?
i have issue when play HLG from DVB
any news for support "HLG" for DVB Addon?
i have issue when play HLG from DVB
You should read the LE11 release notes. These clearly state the AMLGX image is not perfect; although it works well with most normal media and codecs but some users have odd content and it might not suit them. They also tell you there is no support for internal DVB cards. I'd need to see debug logs to make any further comment on playback issues. Run "pastekodi" after clean boot and enabling debug logging and demonstrating problems.
what about for S905D ?
is LE11 ok with it?
Hello All,
I'm trying to follow this thread but I'm not able to retrieve the GTC display driver from MEGA.
Files are no more present on this site (probably becaus it passed at least 3 year from last comment )
Anyone could help me to retrieve the drivers ?
Thank you!
Why don't you try Coreelec via tree:
- gxl_p230_k1_pro.dtb
- gxl_p231_2g_dvb.dtb
- gxl_p231_2g_dvb_ser.dtb
- gxl_p231_c300
I think the Driver DVB is in one of them
Hi dtech
i try your build "Mecool KI Pro (S905D)" for my box "Dune HD Sky 4k Plus" (S905D - 2GB - 1GEthernet - DVB: AVL6211LAX) and work fine for all.
Despite the different version DVB tuner (AVL6862 / AVL6211LAX), recognizes the DVB, but does not find channels after searching
log tvheadend (i2c i2c-1: dvb_meson: failed to enter DVBSx mode)
here full dmesg: http://ix.io/3SBO
and here dmesg dvb:
LibreELEC:~ # dmesg|grep dvb
[ 4.317619@2] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.dvb-latest.conf
[ 4.367554@2] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.dvb-latest/lib/modules/3.14.29
[ 9.309251@1] dvb_meson dvb.49: Found i2c-2 adapter: aml_i2c_adap2
[ 9.309264@1] dvb_meson dvb.49: ts0: parallel
[ 9.309379@1] dvb_meson dvb.49: ts0_control: 0x0
[ 9.309408@1] dvb_meson dvb.49: GPIO fec_reset0: 217
[ 9.309418@1] dvb_meson dvb.49: GPIO power_ctrl0: 215
[ 9.309442@1] dvb_meson dvb.49: dev_name=dvb
[ 10.519651@1] dvb_meson dvb.49: DVB demod detection for i2c-2 (aml_i2c_adap2)...dvb
[ 11.739613@1] dvb_meson dvb.49: Checking for Availink AVL6862 DVB-S2/T2/C demod ...
[ 12.160309@1] i2c i2c-2: dvb_meson: found AVL6862 family_id=0x68624955
[ 23.274292@3] i2c i2c-2: dvb_meson: Rafael R912 successfully attached!
[ 23.274313@3] dvb_meson dvb.49: Total DVB modules found: 1
[ 23.276702@3] dvbdev: DVB: registering new adapter (dvb_meson)
[ 23.282017@3] dvb_meson dvb.49: DVB: registering adapter 0 frontend 0 (Availink avl6862)...
[ 23.378811@3] dvb_meson dvb.49: DVB: adapter 0 frontend 0 frequency 0 out of range (47000000..2150000000)
any help?
after last update driver intel on windows i can do YCbCr 4:2:0 10-bit
what about for driver linux ?
LibreELEC-Generic.x86_64-11.0-devel-20211020222733-d3745e7.img.gz
This is from Oct. 20 master branch (Kodi 20) with the Atmos patch included.
can use YCbCr 4:2:0 instead of RGB for intel gpu?
as amlogic:
echo '422,12bit' > /sys/class/amhdmitx/amhdmitx0/attr
In fact, I did not notice a big difference in colors when playing the video in terms of colors
The only difference in Kodi interface is that it looks like it's not as deep color as the build LE10.0.1
Is there hope in the future to support HDR for 4K 50/60Hz ?
LibreELEC-Generic.x86_64-11.0-devel-20211020222733-d3745e7.img.gz
This is from Oct. 20 master branch (Kodi 20) with the Atmos patch included.
Hi
my hardware is:
Z390 Phantom Gaming-ITX/ac
CPU 8700K
intel UHD 630
LG OLD C7
Pioneer SC-LX704 | AV Receivers
...
my bord Supports HDMI 2.0 with max. resolution up to 4K x 2K (4096x2160) @ 60Hz & Supports HDR with HDMI 2.0
i use build "smp" for HDR , and HDR working via 4K & 23Hz & or 1080p & 60Hz and color: 36bit OK
but color set 24bit if i use 4K & 60/50Hz
and no HDR for PVR DVB Addon
my questions:
1- Is the limitation from hardware or software?
2- Is there a way to change RGB color to YCbCr?
3- Why is the Kodi-20 interface is 24 colors and not 36 colors as in Kodi-19?
my issue from battery motherboard
fixed
ok
after reboot
working fine
LibreELEC:~ # lspci
00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation 6th-9th Gen Core Processor PCIe Controller (x16) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 630 (Desktop)
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
00:14.3 Network controller: Intel Corporation Wireless-AC 9560 [Jefferson Peak] (rev 10)
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
00:17.0 SATA controller: Intel Corporation Cannon Lake PCH SATA AHCI Controller (rev 10)
00:1b.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port (rev f0)
00:1f.0 ISA bridge: Intel Corporation Z390 Chipset LPC/eSPI Controller (rev 10)
00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-V (rev 10)
Display More
LE10.0.1
Hi
How add support driver for Ethernet (Giga PHY Intel® I219V ) in Z390 Phantom Gaming-ITX/ac ?
Hi
i have some issue after try on KIII pro :
Sound 7.1 & No Network & No wifi & No BT
what's wrong?
i set dtb in txt file:
meson-gxm-mecool-kiii-pro.dtb
I just want to report that LibreELEC-ARMv7.arm-9.80-devel-20210117165740-d174eba-rk3188.img.gz is partially working on minix neo x7. There are problems with network connections (no wifi and no ethernet interface) and other little things to adjust ( eg. reboot is not working properly), but audio and video are working fine (I couldn't test everything properly because of the size of my sd card, but I plan to connect an hard disk this weekend and make more tests). Let me know if I can be of any help in this project.
Thank you
Hi
i have minix neo x7 & Wasser rom
Can you explain the steps to run the LibreELEC on the minix neo x7 ?
is there bootloader for libreelec to boot from sd ?
as here:
Linuxium's Bootloader software to dual boot Android and Linux - Linuxium
It will not work with USB, only with an SD card (but there is no guarantee that your model is supported).
i try it via sd card , but not boot
i use on android "Lollipop - wasser firmware 3.0.6 for Minix Neo X7"
what can i do?
Good news.
Working version of Libreelec for rk3188 (thanks to knaerzche for providing the source code). I tested it on my UT2 (rk3188). I wrote the image to the SD card, connected it to UT2, and the system automatically started. Works with HDMI audio and HW acceleration for video (not all formats are supported yet). My LAN hasn't worked yet. Important - now there is a working version of the kernel and u-boot for rk3188, I hope to build a version of Armbian with these sources in the near future.
Thank you to knaerzche for the work done to add support for rk3188 with a modern kernel and u-boot.
Great!
i have Minix Neo X7
how install in usb ?