Posts by schrackin

    Hi,


    i'm using the 8.2.1 version of Libreelec and the latest version of the librespot addon on an Intel NUC. After sleep wakeup, or restart of the NUC the spotify connect client doesn't show up in Spotify clients. if i would like to disable the addon in the addon manager the whole interface freezes, i have to restart the nuc from ssh. The i can enable it , and it is working fine until i sleep-week, sthutdown-wakeup the LE.


    I've attached the librespot addon's log.

    Files

    • ls2.txt

      (7.42 kB, downloaded 142 times, last: )
    • ls.txt

      (14.6 kB, downloaded 148 times, last: )

    Hi,


    in the last couple of days openvpn manager can't connect to my Synology's openvpn server, altough i can connect with the same config from several different devices.


    Could you please give me some advice, what should i check. You can see my log below:


    20:06:32.660 T:140513526241024 NOTICE: Tue Sep 19 20:05:15 2017 WARNING: file '/storage/.kodi/addons/service.vpn.manager/UserDefined/pass.txt' is group or others accessible

    20:06:32.660 T:140513526241024 NOTICE: Tue Sep 19 20:05:15 2017 OpenVPN 2.4.0 x86_64-libreelec-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [AEAD] built on Aug 29 2017

    20:06:32.660 T:140513526241024 NOTICE: Tue Sep 19 20:05:15 2017 library versions: OpenSSL 1.0.2l 25 May 2017, LZO 2.09

    20:06:32.660 T:140513526241024 NOTICE: Tue Sep 19 20:05:15 2017 WARNING: No server certificate verification method has been enabled. See howto.html#mitm for more info.

    20:06:32.660 T:140513526241024 NOTICE: Tue Sep 19 20:05:15 2017 TCP/UDP: Preserving recently used remote address: [AF_INET]xxx.xxx.xxx.xxx:xxx

    20:06:32.660 T:140513526241024 NOTICE: Tue Sep 19 20:05:15 2017 Socket Buffers: R=[212992->212992] S=[212992->212992]

    20:06:32.660 T:140513526241024 NOTICE: Tue Sep 19 20:05:15 2017 UDP link local (bound): [AF_INET][undef]:1194

    20:06:32.660 T:140513526241024 NOTICE: Tue Sep 19 20:05:15 2017 UDP link remote: [AF_INET]xxx.xxx.xxx.xxx:xxx

    20:06:32.660 T:140513526241024 NOTICE: Tue Sep 19 20:05:45 2017 [UNDEF] Inactivity timeout (--ping-exit), exiting

    20:06:32.660 T:140513526241024 NOTICE: Tue Sep 19 20:05:45 2017 SIGTERM[soft,ping-exit] received, process exiting

    20:06:32.660 T:140513526241024 NOTICE: VPN Mgr : (platform.py) <<< VPN log file end

    Hi,


    i'm using the 8.0.2 version of LE on my Intel NUC for media playback. The source for movies and TV series is a Synology NAS on a different location which is accessible via openVPN. I configured my database a long time ago, before i had to move to different from my NAS, i used the hostname of my NAS to setup the smb access for movies and tv series and it worked fine on local network, but not anymore through vpn.

    I thought it would be a simple solution to add the host name and ip address of my NAS to the hosts file but unfortunately Kodi isn't access the SMB share which is added with hostname. If i logon to libreelec and i try to ping the 'NAS' on it's host name it is working fine.


    Could you please tell me what should i do, to solve the problem?


    LibreELEC-NUC:~ # ping nas

    PING nas (192.168.1.5): 56 data bytes

    64 bytes from 192.168.1.5: seq=0 ttl=64 time=3.411 ms


    Content of the hosts file:

    # hosts.conf


    # This configuration file allows you to manually map hostnames to

    # IP addresses


    # Format: <ipaddress> <hostname1> <hostname2>

    # Example: 192.168.0.3 libreelec libreelec.mynetwork


    # NOTE: do not edit /etc/hosts directly

    # edit /storage/.config/hosts.conf then reboot

    192.168.1.5 NAS nas

    10.8.0.1 NAS


    LibreELEC-NUC:~ # ifconfig

    eth0 Link encap:Ethernet HWaddr

    inet addr:192.168.0.22 Bcast:192.168.0.255 Mask:255.255.255.0

    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

    RX packets:45821 errors:0 dropped:0 overruns:0 frame:0

    TX packets:55508 errors:0 dropped:0 overruns:0 carrier:0

    collisions:0 txqueuelen:1000

    RX bytes:8347672 (7.9 MiB) TX bytes:69208818 (66.0 MiB)


    lo Link encap:Local Loopback

    inet addr:127.0.0.1 Mask:255.0.0.0

    inet6 addr: ::1/128 Scope:Host

    UP LOOPBACK RUNNING MTU:65536 Metric:1

    RX packets:0 errors:0 dropped:0 overruns:0 frame:0

    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

    collisions:0 txqueuelen:1

    RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)


    tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00

    inet addr:10.8.0.6 P-t-P:10.8.0.5 Mask:255.255.255.255

    inet6 addr: fe80::b58f:f78c:fb1b:e1cc/64 Scope:Link

    UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1

    RX packets:19414 errors:0 dropped:0 overruns:0 frame:0

    TX packets:22064 errors:0 dropped:0 overruns:0 carrier:0

    collisions:0 txqueuelen:100

    RX bytes:6215094 (5.9 MiB) TX bytes:27670099 (26.3 MiB)

    Hi,


    i would like to setup the Spotify webconnect addon, but i've faced with some "problems", i hope someone can help me. I've had reqested App key from spotify, now i have the following thingy, is this what i need to use the addon?


    spotify appkey


    i would have liked to add the spotify_appkey.key to my addons folder, but i don't know what "format" should i use? Should i just copy the client id and client secret into a text file, name it to spotify_appkey.key and copy it to /storage/.kodi/addons/service.spotify-connect-web folder?

    Hi zomboided2,


    i would like to setup a "UserDefined VPN" in the vpn manager app for Kodi but unfortunatelly i'm facing with a problem during the setup process. I'm using the latest 8.0.1 version of LE on a RPI3.
    I had copied the ovpn and ca.crt files to the /storage/.kodi/addons/service.vpn.manager/UserDefined directory than i started the User defined import wizard. Unfortunately i only saw the following source option when i have to pickup a folder or open the files which are needed for the vpn setup. Could you please tell me how can provide the files which are needed to setup the VPN connection.


    Picture


    Regards, Daniel

    Hey,


    i have a different problem, but it is samba related too. :)
    I would like to mount a samba share permanently, but i couldn't make it happen automatically at system startup.


    I made a config file in "/storage/.config/system.d/", with the following content:
    file name: cifs-nas.mount


    [Unit]
    Description=cifs mount script
    Requires=network-online.service
    After=network-online.service
    Before=kodi.service


    [Mount]
    What=//192.168.1.5/video/TV_Recordings
    Where=/storage/recordings/nas
    Options=username=xxx,password=xxx,rw
    Type=cifs


    [Install]
    WantedBy=multi-user.target


    Than i set to it with the following command:
    systemctl enable cifs-nas.mount


    But unfortunately the pi doesn't mount it at startup. It works with the manula mount:
    mount -t cifs -o username=xxx,password=xxx //192.168.1.5/video/TV_Recordings /storage/recordings/nas


    Could you please help me out, what can be the problem?


    Thanks, it is working.


    Have you tried using it yet?


    You can use VDR or TVheadend as the backend which are available as add-ons in our LibreELEC add-ons repo


    Yes. Should it work like a plug and play device, or do i have to install some kind of driver?


    I have installed both backend plugin, i enabled them, but the chanel search/edit menus aren't pop up in the Settings/TV section if i try to open them. An error message pops up when i hit the epg button that PVR manager hasn't started yet. How can i start it?


    You can find my log on the following link, it may shows some info get further.


    kodi_dvb.txt