Hi chewitt
Thx for support
That is working, now running 11.0.4 again . Now i can see teh status of kodi again
But strange is i could always see the status of the kodi box On,Off, Playing, idle, etc also at 11.0.4. But at 11.0.6 i could not see it anymore . At 11.0.6 i have to enable Remote control (but i only want to see its status) and read it new in Home assist. But than i can only see status Idle or Playing( i want to see also OFF). What is changed in this case?
Or is it possible to install 11.0.4 again?
I installed an older backup, where 11.0.4 was used.But the version 11.0.6 still present
I installed complete new one 11.0.4 but it is standard auto update . So directly after install, setup language,etc the update is already installed. I cannot switch is to manual directly.
Also try to unplug Internet connection, during install, but then I cannot setup languag. I can unselected auto update . After, plug in Internet cable, I cannot select skin etc nothing , strange
How to over overcome this issue?
I actually need the status when it device is OFF
i installed libreelec 11.0.6 now and found out there is no communication anymore with Home assistent.
I have a HTPC installed for years now working ok.
So i try to import libreelec into HA. And during installation it is telling me that i must enable some settings at libreelec (system/settings/service)
So enables remote control. Then i could made a connection ( this setting was not activated before and was running ok at 11.0.4). Then i can read the status in Home assist , it is working. But i do not want to control the device, only see it status like playing,idle, off, etc
But i found that thes status of the librelec mediaplayer is "Idle" or "playing ". even if the player is turned off, it is still idle
there is no Off status anymore ???
for the record i have a HTPC
Libreelec 11.0.6/kodi20.3 now ( generic version)
ok thx for help
a RPI5 is for me maybe a good solution
but this PC works for me still ok, except this issue( a work around is used)
but using a S/PDIF is not done . My sonos has Atmos function , which is not supported by S/PDIF
So the only solution is using a CEC splitter like
thx chewitt i will copy that
Checked Bios , there is no setting which i could change ( DP> HDMI, or something like that)
Also at kodi . when i choose a other connection like HDMI 1 or HDMI2 ( which is also at the settings), i get no sound.
(using optical is not done in my situation)
The setting which i use, kodi detects also which brand the TV is . So i have no choice in this case
about the level 1
/storage/.kodi/userdata/advancedsettings.xml is the right location., see photo
maybe i upload the incoorect file then ?
i used
Settings>libreelec>system
send new kodi.log file and configuration( it sends startconfig file from /flash, kodi.log,kernel.log and samba-config to a URL)
or do i have to send the other option ( send crash file)?
still level 0???
i added this file
<advancedsettings version="1.0">
<loglevel>1</loglevel>
</advancedsettings>
Yes DisplayPort, i think this is the only port which works at libreelec, in my case.
The MB has only a HDMI port , maybe it is a combi port (HMDI/DP) i do not know if i can change it at bios )
Other audio settings, i do not get an audio signal ( ATMOS etc)
https://paste.libreelec.tv/profound-wren.log
Issue was at this log , ARV(SONOS) was not triggered
which file must be posted at pastekodi.
i think usiing kodi who will post it and will give a URL
added the file advancedsettings.xml with level 1
disables setting "component specific log"
now wating for bug...
about using 4k at kodi
when i check the load at system information the load is
16% CPU and 3 %MEM, so i see no issue reason to set it to 1K. I im running on 4k for serveral years now with this hardware
mmh i cannot find the directory \Kodi\userdata
must be debug log be on at?
setting> system> logging > activate specific component logging
Sorry im not familiar with with log level 1
i active logging in kodi
but to do this i have to make a advancedsettings.xml file and add this in %appdata%\Kodi\userdata\. ?
running kodi at 4K , could be an issue . mmhh i never had issues with the video content . so you advise set it in 1k?
Could it be possible that 4k was automatically selected during installation, that i think so
https://paste.libreelec.tv/mint-piglet.log
Issue was at this log , that the ARV(SONOS) was not started
I checked the molthboard j4205 manuals, but i could not find anything about CEC at HDMI. So this port is not CEC compliant
Setup the log ad kodi , now waiting for the audio issue
Ok i will make a log, when it happonds
Using SPDIF, no my Sonos does not support
SPDIF. So i have to install a CEC splitter then?
But i thought when first switch on TV. The TV will trigger the Sonos (AVR).But this is sometime not the case. Every device else like Google tv , ziggo box and ps5, will trigger the AVR. So now I always switch on ziggo box first before HTPC
