sabotendar_kun I don't provide retroarch addon, you have to ask addon author.
Posts by kszaq
-
-
I used the device tree
which I believe is correct for my box Mecool KI pro that has S905D, but I also tried with gxl_p230_k1_pro.dtb and gxbb_p201_2G.dtb in LE 8.1.7 and LE 8.1.8 and did not find the wired network, only found wireless network
One more detail, the first time I installed connected on a 10/100 Mbits router, then I connected to another Gigabit router and reinstalled again and still did not find the wired network
For KI Pro you should use "gxl_p230_k1_pro.dtb". Why do you post Kodi log if this is a hardware issue?
-
Greetings,
Dear Kszaq; The sound keys work like they used to be, so why did you turn off the autorepeat?
It was very good.
Best regards...
The autorepeat patch caused issues with some remotes (unwanted repeats), I had to revert it.
-
kszaq I attached oficial dtb files that I has from videostrong.
KIII Pro device tree is already available for 8.0.x and 8.1.x builds.
-
nie było mnie trochę, potrzebuje oprogramowania pod mój 905X, jakieś namiary, proszę
Please use English. Everything you need is in the first post.
But yesterday I noticed an issue:
I plugged in my Sony Wireless Headset 2.0 and got only audio out of the left channel. The same issue has been posted a while ago here, but I could not find a solution yet.
Do you have a clue?No, I don't because nobody created a bug report.
-
KEgg Perhaps the LE blog post will give you some hints? LibreELEC (Krypton) v8.1.1 BETA – LibreELEC
-
I'd like to ask the developers if it would be possible to make the .dff .dfs files (SACD) reproduction work on the s905x devices.
On Kodi that runs on x86 those files work perfectly.Any chance?
Separate thread, log, samples - any chance?
-
-
DS-1 Yes, it can be set in Kodi settings - don't remember where exactly from the top of my head.
-
DS-1 Yes, this is correct. This makes suspend available in Kodi shutdown menu but not necessarily makes it work.
-
8.1.8 uploaded with BlueBorne vulnerability fix.
-
8.1.8 uploaded with BlueBorne vulnerability fix.
-
8.1.8 uploaded with BlueBorne vulnerability fix.
-
Hey wait.. so is it an overclock? Mali-820 is supposed to works at 600Mhz.
It's not an overclock. According to datasheet Mali-T820MP3 in S912 goes up to 750MHz (although it's not supported by kernel).
What is the difference between gxm_q200_k3_pro.dtb and the dtb videostrong/acemax/mecool file that has on new firmwares? Are both compatible to install Libreelec? I said it because gxm_q200_k3_pro.dtb looks a little bit outdated (19-Jul-2017 20:05)
Do the vendors provide device tree for LibreELEC? I don't think so.
-
So is this still current not to buy an S912? What is the disadvantage of an 905X? I like a gigbit an USB 3.0 if possible.
What is the problem with the S912??Why don't you read the first post carefully?
No Amlogic SoC offers USB 3.0.
Can someone please answer my question please?
I saw on s905x thread someone asked similar question and he needed to switch to 8/10bit and re-enter the resolution.
I was wondering if the same can be done for s912.RGB mode does not work on 8.1.x versions.
-
Greetings,
Dear kszaq; In 8.1.7 the zap speed is very good.
What is the reason for this?Best regards...
Magic.
Because I did nothing to improve it.
-
You have to post a sample for us to precisely identify "this type of files". Personally I doubt it's a 10-bit H.264 encode as these are already blacklisted for hardware decoding.
This link may help you cutting the video in Linux: linux - Cutting the videos based on start and end time using ffmpeg - Stack Overflow
-
You're in the wrong forum. Please read this post carefully: [HOWTO + FAQ] Install community builds on S905/S905X/S912 device
Also carefully read the first post: [8.1.7] LibreELEC 8.2 for S905/S905X
Where did you get the download link from if you did not see these before?
