Strange, i dont have any problems at all with my Pi 4's, one with 2x4TB, one with 2x2x6TB & one with atm 8x4TB, all 3 boots from ssd. One running LE11 nightly (latest) and 2 with LE12 aarch64 (latest).
Posts by MatteN
-
-
Did you set up Whitelist?
And is 25fps in that list?
Maybe your display wont support 25fps, my Sony LED tv dont.
-
Thread
ext HDs not mounted after 11.01 update
Well just a small issue. My 2 ext 4TB drives are missing. I get a message when I power them down that both were successfully removed. One drive showed offline using Win disk manager. I set it back to online and tried again but LE 11.01 does not seem to recognize them. Something in the update process is likely the cause as this happened with the 11.0 upgrade. Here's my log.
http://ix.io/4sie
ReddirtMarch 31, 2023 at 6:01 AM Threadusb hdds not mounting after restart
Hello everyone!
So I'm having this issue that started a few days ago and I'm unable to figure it out why both my usb hdds aren't mounting after restart.
What I'm running: LibreELEC nightly-20220426-d546803 on a RPi4 8gb with two self-powered WD MyBook 16Tb hdds, with one NTFS partition each, hooked to a self-powered Anker usb3 hub.
What happens: it started with just a delay in mounting the hdds at start but after a day or two they wouldn't get mounted at all.
What I do: first I tried just unhooking…madaloneApril 27, 2022 at 5:31 PM -
Check your CEC-settings.
-
At https://test.libreelec.tv/ changelogs are gone again.
-
Keep looking, there is no such thing as a "perfect" whatever when it comes to media devices, well, at least not more than like a month or six at the most.
-
Depending on what kind of SSD it is they can consume upp to 15W or more.
-
All my NTFS-disks still mounts and works flawless.
-
Which HDMI problems?
Video
Sound
CEC?
Video, i dont use CEC.
-
Problem is with HDMI.
-
3 out of my 4 Argon cases had problems and i have stopped using them, only one without problems is the one with my Pi3B in it. The others was bought for my Pi4's.
-
Out of pure curiosity I powered up my Rpi4-8gb running LE11.01 then powered up a USB connected 2TB external HD GPT /ntfs system and no issues to report. Could the drive size be a factor?
I have Pi4 with 4x6TB running without any issues, even one with atm 8x4TB that on occasions runs with 16x4TB, havent seen any problems with any of them yet.
-
I'm using NTFS-formatted HDD's (4-8 atm) on several Pi4 without any issues, but maybe i'm just lucky.
Most people use Windows at home & at work so a fix would probably be wanted (and needed) by those that do run into problems.
-
I have several Armor cases and have put on a 50 mm 12V fan connected to 5V GPIO, cant hear it but my overclocked Pi4's never gets over 40C.
-
-
Im running LE 12 aarch64 on one of my Pi4's, its working fine.
-
On my other Pi4 with 4x6TB i have occasional messages on boot as i boot from an ssd connected to one of the USB2-ports and LE probably assumes the bootdisk should be attached to a USB3-port but it just delays the boot for a few seconds, otherwise no problems.
-
My test have been up for just over 24 hrs now with several on/off & reboots, right now im deleting & moving files to & from the 8 drives from other windows pc's trying to provoke any failures, no luck so far...