quitroot !
I have managed by using method of afl1
I installed dbt via TWRP using android update and now LE is fully running from NAND.
Unpack following archive to empty SD card.
KI_PRO_twrp3.zip
Put card in box and restart it. If TWRP3 is not starting use toothpick method.In TWRP install from SD card KI_PRO_dtb.zip. Use USB mouse to control TWRP.
I just used "reboot update" from SSH LE
Original remote works !
I will try KI_PRO_AVL6862-NMF26Q-20170519.183520.V0321.img
Stop - it Android 7.1.1
It's came with Android 7, And I don't have the older firmware files for this procedure.
I also had Android 7,
I will try KI_PRO_AVL6862-NMF26Q-20170519.183520.V0321.img (software)
Like the oldest
We'll wait patiently. Thank you very much.
What was your original version Android ? (6 or 7)
I here read on the forums:
"... To work the remote control, you need to use the old version of the firmware (with Android 6). The new version of the firmware (with Android 7) changed the format of the processing codes for the remote control and this format is not compatible with existing images LE. Therefore, the remote LE will not work if you attempt to run LE on a version 7 Android. So for those who wanted to install the LE in the internal memory (eMMC), you need to have the firmware in eMMC with the previous version of Android 6. Only then, after the install LE in the eMMC, will operate the remote control.""
Can write old version of the firmware (with Android 6) and repeat everything ?
Display Moreki pro [s905d]
done fresh install:1. back to androd.
2. boot librelec (8.0.2b & gxl_p230_k1_pro.dtb) from sdcard - working well.
2. install it to nand (by installtointernal command).
3. reboot from nand - remote controll isn't working.
I have the same problem!
I followed all the recommendations kszaq
