Posts by Iridium

Please provide URL from

dmesg | paste

cat /storage/.kodi/temp/kodi.log | paste

lsusb | paste

You may need to revert to you pre-upgrade backup if the saa716x is no longer supported.

I have a feeling that connman AP mode was made as simple as possible and be available for most devices i.e 2.4MHz.

As a test, can you turn off 2.4GHz on your router and see if tethering still works on 5GHz.

If you can find out which gpio pin is not used by hifiberry then it *might* be possible to change service.py in the addon to use that free pin.

jane_t might be able to confirm if that is possible. (Might be a future release - config - choose pin used)

Otherwise you'll probably need to use a script : probably using Kodi built in fucntions.

I've just tried an old Edimax wifi adapter and it works fine on RPi4

lsusb

Bus 001 Device 003: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter

So if you get something similar, then it is probably something else.

Yes: A wifi bridge converts wifi to ethernet

Your box is NOT officially supported. However there are community builds. Try searching Here

What exactly are you trying to achieve?

Do you have auto update enabled? If so, it looks like your unit has automatically upgraded to the latest release. Your Edimax wifi is using a realtek chip which *might* be no longer supported.

Because of the driver issues with realtek chips support has been limited and the preferred option is to use a Wifi bridge to ethernet.

If you can remember the previous release, it might be possible to downgrade (Make a backup first)

More Info

If you use a remote: then use the Kodi addon commands

Try reading the link I suggested.

C:\Series\Band of Brothers (2001)\Season 1\Band of Brothers (2001) S01E01.mp4

Have you named your folders/files correctly? Kodi

movieDB is split between movies and TV. When you choose your scraper, you will see "TV Show scraper" and "Movie scraper".

You can still download The TVDB from the addons to see if that works better for you.

I'm not an expert but it looks like the RPi4 handles the GPU memory differently from RPi1/2/3. According to a hardware engineer in this Post "

Quote

Therefore, allocating lots of "GPU memory" is normally a waste of memory and will hurt system performance. 128MB is probably plenty for dual 4K HDMI + camera + h.264 decode"

So *maybe* 320MB is not required.

... and yes I have the 4G version, so loads of RAM.

I've tried on my RPi and it works fine. Can you try gpu_mem=128 and see if that improves things.

Your hardbin logs are unreachable (Gateway timeout).

Can you provide URL of cat /storage/.kodi/temp/kodi.log | paste instead

Hmm. Just tried on my S905x (LibreELEC (wrxtasy-kszaq): 8.2.4.2-S905Test-1529136339 (S912.arm)
) and it doesn't work.

My guess is that swapping was NOT enabled in the kernel - for these devices it was not necessary (oodles of RAM).

If you *really* need swap then you are doing something beyond the concept of LE or just doing too much for your box.

Can you try again: If still an issue:

The TVDB seems to find the series as "Alfie Atkins" so you *may* need to rename your files.

I'm not aware of a Kodi Swedish scraper but you can search. Who knows what might appear.

The *ideal* solution is a Wifi bridge that converts Wifi to ethernet. The "bridge" can be moved around to get the best reception and the ethernet cable, plugged into your LE device, can be hidden as required, Also NO drivers are required and is future proof.

Hmmm What's your RPi4 memory? Can you provide a copy of an offending jpg? (Nothing nasty, personal or illegal)

Firstly - adhere to the Kodi naming convention

Also see if there is a specific Swedish scrapper for Kodi.

By the looks of it, it's a TV program NOT a movie. Have you set the source as TV and not movie?