Posts by taki

do not support dvb

I didnt tested full but

gui ok (some time frezing 1-4 second (old 4.20 kernel)

gui 1080p 60hz ok

remote dont work

Lan ok

wifi ok

not tested any video.

I will try tvheadend

I tested and tryed LibreELEC-S905.aarch64-9.1-devel-20190221092541-14a36dc.img (dvb version kernel 4.20) on my k1 pro

here is log

Booting Linux on physical CPU 0x0000000000 [0x410fd034]

[ 0.000000] Linux version 4.20.10 (user@user-VirtualBox) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Thu Feb 21 11:04:36 MSK 2019

[ 0.000000] Machine model: MeCool KI Pro (S905D)

[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000040000000, size 896 MiB

[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool

[ 0.000000] psci: probing for conduit method from DT.

[ 0.000000] psci: PSCIv0.2 detected in firmware.

[ 0.000000] psci: Using standard PSCI v0.2 function IDs

[ 0.000000] psci: Trusted OS migration not required

[ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x3e8 with crng_init=0

[ 0.000000] percpu: Embedded 22 pages/cpu @(____ptrval____) s52440 r8192 d29480 u90112

[ 0.000000] Detected VIPT I-cache on CPU0

[ 0.000000] CPU features: enabling workaround for ARM erratum 845719

[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)

[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 478528

[ 0.000000] Kernel command line: ddr_size= boot=LABEL=LIBREELEC disk=LABEL=STORAGE hdmitx=cecf console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 systemd.show_status=auto rootfstype=ramfs init=/init logo=osd1,loaded,0x3d800000,576cvbs vout=576cvbs,enable hdmimode=1080p60hz cvbsmode=576cvbs cvbsdrv=0

[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)

[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.000000] Memory: 969296K/1944576K available (12542K kernel code, 1006K rwdata, 4088K rodata, 2624K init, 780K bss, 57776K reserved, 917504K cma-reserved)

[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[ 0.000000] rcu: Preemptible hierarchical RCU implementation.

[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.

[ 0.000000] Tasks RCU enabled.

[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.

[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4

[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0

[ 0.000000] GIC: Using split EOI/Deactivate mode

[ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized

[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).

[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns

[ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns

[ 0.000351] Console: colour dummy device 80x25

[ 0.000647] printk: console [tty0] enabled

[ 0.000681] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)

[ 0.000702] pid_max: default: 32768 minimum: 301

[ 0.000779] LSM: Security Framework initializing

[ 0.000795] AppArmor: AppArmor disabled by boot time parameter

[ 0.000853] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)

[ 0.000873] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)

[ 0.024004] ASID allocator initialised with 32768 entries

[ 0.031991] rcu: Hierarchical SRCU implementation.

[ 0.048042] smp: Bringing up secondary CPUs ...

[ 0.080237] Detected VIPT I-cache on CPU1

[ 0.080284] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]

[ 0.112270] Detected VIPT I-cache on CPU2

[ 0.112305] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]

[ 0.144319] Detected VIPT I-cache on CPU3

[ 0.144352] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]

[ 0.144416] smp: Brought up 1 node, 4 CPUs

[ 0.144482] SMP: Total of 4 processors activated.

[ 0.144494] CPU features: detected: 32-bit EL0 Support

[ 0.144505] CPU features: detected: CRC32 instructions

[ 0.147093] CPU: All CPU(s) started at EL2

[ 0.147114] alternatives: patching kernel code

[ 0.147739] devtmpfs: initialized

[ 0.152093] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[ 0.152131] futex hash table entries: 1024 (order: 4, 65536 bytes)

[ 0.172789] xor: measuring software checksum speed

[ 0.212328] 8regs : 2375.000 MB/sec

[ 0.252353] 8regs_prefetch: 2052.000 MB/sec

[ 0.292382] 32regs : 2725.000 MB/sec

[ 0.332409] 32regs_prefetch: 2309.000 MB/sec

[ 0.332419] xor: using function: 32regs (2725.000 MB/sec)

[ 0.332487] pinctrl core: initialized pinctrl subsystem

[ 0.333556] NET: Registered protocol family 16

[ 0.334045] audit: initializing netlink subsys (disabled)

[ 0.334165] audit: type=2000 audit(0.332:1): state=initialized audit_enabled=0 res=1

[ 0.336561] cpuidle: using governor menu

[ 0.336921] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))

[ 0.336941] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.

[ 0.337923] DMA: preallocated 256 KiB pool for atomic allocations

[ 0.338046] Serial: AMBA PL011 UART driver

[ 0.352237] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages

[ 0.352793] cryptd: max_cpu_qlen set to 1000

[ 0.420770] raid6: int64x1 gen() 481 MB/s

[ 0.488710] raid6: int64x1 xor() 460 MB/s

[ 0.556745] raid6: int64x2 gen() 723 MB/s

[ 0.624781] raid6: int64x2 xor() 609 MB/s

[ 0.692831] raid6: int64x4 gen() 1025 MB/s

[ 0.760891] raid6: int64x4 xor() 749 MB/s

[ 0.828920] raid6: int64x8 gen() 1190 MB/s

[ 0.896994] raid6: int64x8 xor() 767 MB/s

[ 0.965062] raid6: neonx1 gen() 783 MB/s

[ 1.033072] raid6: neonx1 xor() 900 MB/s

[ 1.101129] raid6: neonx2 gen() 1194 MB/s

[ 1.169145] raid6: neonx2 xor() 1203 MB/s

[ 1.237182] raid6: neonx4 gen() 1561 MB/s

[ 1.305240] raid6: neonx4 xor() 1459 MB/s

[ 1.373295] raid6: neonx8 gen() 1628 MB/s

[ 1.441322] raid6: neonx8 xor() 1498 MB/s

[ 1.441332] raid6: using algorithm neonx8 gen() 1628 MB/s

[ 1.441342] raid6: .... xor() 1498 MB/s, rmw enabled

[ 1.441353] raid6: using neon recovery algorithm

[ 1.441687] fbcon: Taking over console

[ 1.443134] SCSI subsystem initialized

[ 1.443453] usbcore: registered new interface driver usbfs

[ 1.443509] usbcore: registered new interface driver hub

[ 1.443600] usbcore: registered new device driver usb

[ 1.444060] pps_core: LinuxPPS API ver. 1 registered

[ 1.444083] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>

[ 1.444116] PTP clock support registered

[ 1.444543] Advanced Linux Sound Architecture Driver Initialized.

[ 1.445007] NetLabel: Initializing

[ 1.445028] NetLabel: domain hash size = 128

[ 1.445037] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO

[ 1.445095] NetLabel: unlabeled traffic allowed by default

[ 1.445563] clocksource: Switched to clocksource arch_sys_counter

[ 1.445731] VFS: Disk quotas dquot_6.6.0

[ 1.445786] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 1.445902] FS-Cache: Loaded

[ 1.451227] NET: Registered protocol family 2

[ 1.451653] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)

[ 1.451698] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

[ 1.451817] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)

[ 1.452021] TCP: Hash tables configured (established 16384 bind 16384)

[ 1.452134] UDP hash table entries: 1024 (order: 3, 32768 bytes)

[ 1.452184] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)

[ 1.452360] NET: Registered protocol family 1

[ 1.452695] RPC: Registered named UNIX socket transport module.

[ 1.452711] RPC: Registered udp transport module.

[ 1.452721] RPC: Registered tcp transport module.

[ 1.452730] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 1.452743] NET: Registered protocol family 44

[ 1.529666] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available

[ 1.537743] Initialise system trusted keyrings

[ 1.537878] workingset: timestamp_bits=46 max_order=19 bucket_order=0

[ 1.543453] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[ 1.543824] FS-Cache: Netfs 'nfs' registered for caching

[ 1.544356] NFS: Registering the id_resolver key type

[ 1.544393] Key type id_resolver registered

[ 1.544402] Key type id_legacy registered

[ 1.544418] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[ 1.544431] Installing knfsd (copyright (C) 1996 [email protected]).

[ 1.545237] FS-Cache: Netfs 'cifs' registered for caching

[ 1.545516] Key type cifs.spnego registered

[ 1.545541] Key type cifs.idmap registered

[ 1.545594] ntfs: driver 2.1.32 [Flags: R/W].

[ 1.546155] JFS: nTxBlock = 8192, nTxLock = 65536

[ 1.550295] SGI XFS with ACLs, security attributes, realtime, no debug enabled

[ 1.551884] ocfs2: Registered cluster interface o2cb

[ 1.552077] OCFS2 User DLM kernel interface loaded

[ 1.553393] gfs2: GFS2 installed

[ 1.563792] Key type asymmetric registered

[ 1.563817] Asymmetric key parser 'x509' registered

[ 1.563876] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)

[ 1.563996] io scheduler noop registered

[ 1.564010] io scheduler deadline registered

[ 1.564171] io scheduler cfq registered (default)

[ 1.564185] io scheduler mq-deadline registered

[ 1.564195] io scheduler kyber registered

[ 1.564302] io scheduler bfq registered

[ 1.578271] soc soc0: Amlogic Meson GXL (Unknown) Revision 21:b (2:2) Detected

[ 1.581722] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 1.583193] Serial: AMBA driver

[ 1.583497] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 13, base_baud = 1500000) is a meson_uart

[ 2.444607] printk: console [ttyAML0] enabled

[ 2.450487] lima d00c0000.gpu: bus rate = 166666667

[ 2.453753] lima d00c0000.gpu: mod rate = 744000000

[ 2.458726] [TTM] Zone kernel: Available graphics memory: 943400 kiB

[ 2.464951] [TTM] Initializing pool allocator

[ 2.469266] [TTM] Initializing DMA pool allocator

[ 2.475024] lima d00c0000.gpu: gp - mali450 version major 0 minor 0

[ 2.480163] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0

[ 2.486452] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0

[ 2.492748] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0

[ 2.499044] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus

[ 2.507125] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus

[ 2.516075] [drm] Initialized lima 1.0.0 20170325 for d00c0000.gpu on minor 0

[ 2.525426] brd: module loaded

[ 2.529940] loop: module loaded

[ 2.531239] libphy: Fixed MDIO Bus: probed

[ 2.533270] tun: Universal TUN/TAP device driver, 1.6

[ 2.539242] meson8b-dwmac c9410000.ethernet: PTP uses main clock

[ 2.543540] meson8b-dwmac c9410000.ethernet: no reset control found

[ 2.550285] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37

[ 2.556817] meson8b-dwmac c9410000.ethernet: DWMAC1000

[ 2.561980] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported

[ 2.569393] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported

[ 2.576811] meson8b-dwmac c9410000.ethernet: COE Type 2

[ 2.581989] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported

[ 2.588971] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported

[ 2.595381] meson8b-dwmac c9410000.ethernet: Normal descriptors

[ 2.601219] meson8b-dwmac c9410000.ethernet: Ring mode enabled

[ 2.607000] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer

[ 3.645593] libphy: stmmac: probed

[ 3.647222] dwc3 c9000000.dwc3: Failed to get clk 'ref': -2

[ 3.650334] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 3.655413] ehci-platform: EHCI generic platform driver

[ 3.660747] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 3.666691] ohci-platform: OHCI generic platform driver

[ 3.672415] usbcore: registered new interface driver usb-storage

[ 3.679160] mousedev: PS/2 mouse device common for all mice

[ 3.684039] i2c /dev entries driver

[ 3.688908] sdhci: Secure Digital Host Controller Interface driver

[ 3.692908] sdhci: Copyright(c) Pierre Ossman

[ 3.697244] Synopsys Designware Multimedia Card Interface Driver

[ 3.704043] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.3

[ 3.710058] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2

[ 3.716887] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2

[ 3.723381] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.3

[ 3.730198] meson-gx-mmc d0072000.mmc: Linked as a consumer to regulator.3

[ 3.736753] meson-gx-mmc d0072000.mmc: Linked as a consumer to regulator.2

[ 3.743612] meson-gx-mmc d0072000.mmc: Got CD GPIO

[ 3.775296] meson-gx-mmc d0074000.mmc: Linked as a consumer to regulator.4

[ 3.776652] meson-gx-mmc d0074000.mmc: Linked as a consumer to regulator.2

[ 3.783449] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq

[ 3.815194] sdhci-pltfm: SDHCI platform and OF driver helper

[ 3.816288] ledtrig-cpu: registered to indicate activity on CPUs

[ 3.821836] meson-sm: secure-monitor enabled

[ 3.825075] mmc0: new high speed SDHC card at address 1234

[ 3.825951] hidraw: raw HID events driver (C) Jiri Kosina

[ 3.831790] mmcblk0: mmc0:1234 SA08G 7.29 GiB

[ 3.836802] usbcore: registered new interface driver usbhid

[ 3.842826] mmcblk0: p1 p2

[ 3.846198] usbhid: USB HID core driver

[ 3.853039] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered

[ 3.860442] meson-saradc c1108680.adc: Linked as a consumer to regulator.1

[BL31]: tee size: 0

[ 3.870179] NET: Registered protocol family 17

[ 3.872654] Key type dns_resolver registered

[ 3.877496] registered taskstats version 1

[ 3.880806] Loading compiled-in X.509 certificates

[ 3.886500] Btrfs loaded, crc32c=crc32c-generic

[ 3.890894] Key type encrypted registered

[ 3.903160] meson-drm d0100000.vpu: Queued 3 outputs on vpu

[ 3.903474] libphy: mdio_mux: probed

[ 3.907361] libphy: mdio_mux: probed

[ 3.913252] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller

[ 3.915730] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1

[ 3.924143] mmc1: new HS200 MMC card at address 0001

[ 3.928989] mmcblk1: mmc1:0001 AJNB4R 14.6 GiB

[ 3.933279] mmcblk1boot0: mmc1:0001 AJNB4R partition 1 4.00 MiB

[ 3.939174] mmcblk1boot1: mmc1:0001 AJNB4R partition 2 4.00 MiB

[ 3.944653] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010

[ 3.953724] mmcblk1rpmb: mmc1:0001 AJNB4R partition 3 4.00 MiB, chardev (245:0)

[ 3.961127] xhci-hcd xhci-hcd.0.auto: irq 39, io mem 0xc9000000

[ 3.967004] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20

[ 3.974967] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 3.982494] usb usb1: Product: xHCI Host Controller

[ 3.987031] usb usb1: Manufacturer: Linux 4.20.10 xhci-hcd

[ 3.992816] usb usb1: SerialNumber: xhci-hcd.0.auto

[ 3.998162] hub 1-0:1.0: USB hub found

[ 4.000942] hub 1-0:1.0: 2 ports detected

[ 4.005170] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller

[ 4.010344] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2

[ 4.017931] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed

[ 4.024518] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.

[ 4.032562] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20

[ 4.040684] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 4.047841] usb usb2: Product: xHCI Host Controller

[ 4.052670] usb usb2: Manufacturer: Linux 4.20.10 xhci-hcd

[ 4.058104] usb usb2: SerialNumber: xhci-hcd.0.auto

[ 4.063354] hub 2-0:1.0: USB hub found

[ 4.066680] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)

[ 4.074777] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.3

[ 4.080581] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2

[ 4.087439] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2

[ 4.093931] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.3

[ 4.100992] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware

domain-0 init dvfs: 4

[ 4.117820] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.3

[ 4.119088] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2

[ 4.125985] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2

[ 4.132463] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.3

[ 4.140061] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.3

[ 4.145882] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2

[ 4.152700] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2

[ 4.159202] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.3

[ 4.166043] hctosys: unable to open rtc device (rtc0)

[ 4.170963] ALSA device list:

[ 4.173668] No soundcards found.

[ 4.178356] Freeing unused kernel memory: 2624K

[ 4.206071] Run /init as init process

LibreELEC:~ # uname -a

Linux LibreELEC 4.20.10 #1 SMP PREEMPT Thu Feb 21 11:04:36 MSK 2019 aarch64 GNU/Linux

LibreELEC:~ # cat /dev/dvb

cat: read error: Is a directory

LibreELEC:~ # lspci

/bin/sh: lspci: not found

LibreELEC:~ # lsusb

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

LibreELEC:~ # dmesg | grep dvb

[ 38.254317] dvb_meson c1108c40.dvb: Found i2c-0 adapter: Meson I2C adapter

[ 38.254328] dvb_meson c1108c40.dvb: ts0: parallel

[ 38.254509] dvb_meson c1108c40.dvb: ts0_control: 0x0

[ 38.254663] dvb_meson c1108c40.dvb: dev_name=avl6862

[ 39.485662] dvb_meson c1108c40.dvb: DVB demod detection for i2c-0 (Meson I2C adapter)...

[ 40.701594] dvb_meson c1108c40.dvb: Checking for Availink AVL6862 DVB-S2/T2/C demod ...

[ 40.702131] i2c i2c-0: dvb_meson: found AVL6862 family_id=0x68624955

[ 42.264496] i2c i2c-0: dvb_meson: Rafael R912 successfully attached!

[ 42.264509] dvb_meson c1108c40.dvb: Total DVB modules found: 0

[ 42.274475] dvbdev: DVB: registering new adapter (dvb_meson)

[ 42.284595] dvb_meson c1108c40.dvb: DVB: registering adapter 0 frontend 0 (Availink avl6862)...

LibreELEC:~ # dmesg | grep -i dvb

[ 38.254317] dvb_meson c1108c40.dvb: Found i2c-0 adapter: Meson I2C adapter

[ 38.254328] dvb_meson c1108c40.dvb: ts0: parallel

[ 38.254509] dvb_meson c1108c40.dvb: ts0_control: 0x0

[ 38.254663] dvb_meson c1108c40.dvb: dev_name=avl6862

[ 39.485662] dvb_meson c1108c40.dvb: DVB demod detection for i2c-0 (Meson I2C adapter)...

[ 40.701594] dvb_meson c1108c40.dvb: Checking for Availink AVL6862 DVB-S2/T2/C demod ...

[ 40.702131] i2c i2c-0: dvb_meson: found AVL6862 family_id=0x68624955

[ 40.702138] i2c i2c-0: Load avl6862 firmware patch for DVB-S/S2 size=44108

[ 42.264496] i2c i2c-0: dvb_meson: Rafael R912 successfully attached!

[ 42.264509] dvb_meson c1108c40.dvb: Total DVB modules found: 0

[ 42.274475] dvbdev: DVB: registering new adapter (dvb_meson)

[ 42.284595] dvb_meson c1108c40.dvb: DVB: registering adapter 0 frontend 0 (Availink avl6862)...

[ 42.284820] Meson DVB frontend(s) registered successfully.

LibreELEC:~ #

k1pro#printenv

1080p60hz_deepcolor=rgb,8bit

EnableSelinux=enforcing

active_slot=_a

aml_dt=gxl_q20x_2g

baudrate=115200

bcb_cmd=get_valid_slot;

boot_part=misc

bootargs=rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=enforcing logo=osd1,loaded,0x3d800000,576cvbs maxcpus=4 vout=576cvbs,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 pq= androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic mac=55:55:555:55:55:55 androidboot.mac=55:55:555:55:55:55 androidboot.slot_suffix=_a

bootcmd=if test ${bootfromnand} = 1; then setenv bootfromnand 0; saveenv; else run libreelec; fi; run storeboot

bootdelay=1

bootfromnand=0

bootup_offset=0x10d8120

bootup_size=0x3f4c8

cmdline_keys=if keyman init 0x1234; then if keyman read usid ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.serialno=${usid};setenv serial ${usid};fi;if keyman read mac ${loadaddr} str; then setenv bootargs ${bootargs} mac=${mac} androidboot.mac=${mac};fi;if keyman read deviceid ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.deviceid=${deviceid};fi;fi;

colorattribute=rgb,8bit

cvbs_drv=0

cvbsmode=576cvbs

display_bpp=16

display_color_bg=0

display_color_fg=0xffff

display_color_index=16

display_height=576

display_layer=osd1

display_width=720

dtb_mem_addr=0x1000000

ethact=dwmac.c9410000

ethaddr=55:55:555:55:55:55

factory_reset_poweroff_protect=echo wipe_data=${wipe_data}; echo wipe_cache=${wipe_cache};if test ${wipe_data} = failed; then run init_display; run storeargs;if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;fi; if test ${wipe_cache} = failed; then run init_display; run storeargs;if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;fi;

fb_addr=0x3d800000

fb_height=1080

fb_width=1920

fdt_high=0x20000000

filesize=1a9

firstboot=0

gatewayip=10.18.9.1

hdmimode=1080p60hz

hostname=arm_gxbb

init_display=osd open;osd clear;imgread pic logo bootup $loadaddr;bmp display $bootup_offset;bmp scale

initargs=rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000

ipaddr=10.18.9.97

jtag=apao

libreelec=run librefromsd; run librefromusb

librefromsd=mmcinfo; if fatload mmc 0 ${loadaddr} kernel.img; then run sddtb; setenv bootargs ${bootargs} bootfromsd; bootm; fi

librefromusb=usb start 0; if fatload usb 0 ${loadaddr} kernel.img; then run usbdtb; setenv bootargs ${bootargs} bootfromusb; bootm; fi

linux_start_mmc=if fatload mmc 0 1080000 kernel.itb;then echo E2 mmc ;; bootm 1080000;fi;

loadaddr=1080000

mac=55:55:555:55:55:55

maxcpus=4

netmask=255.255.255.0

outputmode=576cvbs

preboot=run factory_reset_poweroff_protect;run upgrade_check;run bootmode_check;run init_display;run storeargs;run upgrade_key;run user_start;run switch_bootmode;

reboot_mode=cold_boot

recovery_from_flash=setenv bootargs ${bootargs} aml_dt=${aml_dt} recovery_part={recovery_part} recovery_offset={recovery_offset};if itest ${upgrade_step} == 3; then if ext4load mmc 1:2 ${dtb_mem_addr} /recovery/dtb.img; then echo cache dtb.img loaded; fi;if ext4load mmc 1:2 ${loadaddr} /recovery/recovery.img; then echo cache recovery.img loaded; wipeisb; bootm ${loadaddr}; fi;else fi;if imgread kernel ${recovery_part} ${loadaddr} ${recovery_offset}; then wipeisb; bootm ${loadaddr}; fi;

recovery_from_sdcard=setenv bootargs ${bootargs} aml_dt=${aml_dt} recovery_part={recovery_part} recovery_offset={recovery_offset};if fatload mmc 0 ${loadaddr} aml_autoscript; then autoscr ${loadaddr}; fi;if fatload mmc 0 ${loadaddr} recovery.img; then if fatload mmc 0 ${dtb_mem_addr} dtb.img; then echo sd dtb.img loaded; fi;wipeisb; bootm ${loadaddr};fi;

recovery_from_udisk=setenv bootargs ${bootargs} aml_dt=${aml_dt} recovery_part={recovery_part} recovery_offset={recovery_offset};if fatload usb 0 ${loadaddr} aml_autoscript; then autoscr ${loadaddr}; fi;if fatload usb 0 ${loadaddr} recovery.img; then if fatload usb 0 ${dtb_mem_addr} dtb.img; then echo udisk dtb.img loaded; fi;wipeisb; bootm ${loadaddr};fi;

recovery_offset=0

recovery_part=recovery

sdc_burning=sdc_burn ${sdcburncfg}

sdcburncfg=aml_sdc_burn.ini

sddtb=if fatload mmc 0 ${dtb_mem_addr} dtb.img; then else store dtb read $dtb_mem_addr; fi

serverip=10.18.9.113

stderr=serial

stdin=serial

stdout=serial

storeargs=setenv bootargs ${initargs} androidboot.selinux=${EnableSelinux} logo=${display_layer},loaded,${fb_addr},${outputmode} maxcpus=${maxcpus} vout=${outputmode},enable hdmimode=${hdmimode} cvbsmode=${cvbsmode} hdmitx=${cecconfig} cvbsdrv=${cvbs_drv} pq=${pq} androidboot.firstboot=${firstboot} jtag=${jtag}; setenv bootargs ${bootargs} androidboot.hardware=amlogic;run cmdline_keys;setenv bootargs ${bootargs} androidboot.slot_suffix=${active_slot};

storeboot=if imgread kernel ${boot_part} ${loadaddr}; then bootm ${loadaddr}; fi;run update;

switch_bootmode=get_rebootmode;if test ${reboot_mode} = factory_reset; then run recovery_from_flash;else if test ${reboot_mode} = update; then run update;else if test ${reboot_mode} = cold_boot; then else if test ${reboot_mode} = fastboot; then fastboot;fi;fi;fi;fi;

try_auto_burn=update 700 750;

update=run usb_burning; run sdc_burning; if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;

upgrade_check=echo upgrade_step=${upgrade_step}; if itest ${upgrade_step} == 3; then run init_display; run storeargs; run update;else fi;

upgrade_key=if gpio input GPIOAO_2; then echo detect upgrade key; sleep 3;if gpio input GPIOAO_2; then run update; fi;fi;

upgrade_step=2

usb_burning=update 1000

usbdtb=if fatload usb 0 ${dtb_mem_addr} dtb.img; then else store dtb read $dtb_mem_addr; fi

user_start=if mmcinfo; then run linux_start_mmc;fi;

wipe_cache=successful

wipe_data=successful

Environment size: 6174/65532 bytes

k1pro#help

? - alias for 'help'

aml_sysrecovery- Burning with amlogic format package from partition sysrecovery

amlmmc - AMLMMC sub system

autoscr - run script from memory

base - print or set address offset

bcb - bcb

bmp - manipulate BMP image data

booti - boot arm64 Linux Image image from memory

bootm - boot application image from memory

bootp - boot image via network using BOOTP/TFTP protocol

cbusreg - cbus register read/write

chipid - Print Chip ID

clkmsr - Amlogic measure clock

cmp - memory compare

cp - memory copy

crc32 - checksum calculation

cvbs - CVBS sub-system

dcache - enable or disable data cache

defenv_reserv- reserve some specified envs after defaulting env

dhcp - boot image via network using DHCP/TFTP protocol

echo - echo args to console

efuse - efuse commands

efuse_user- efuse user space read write ops

emmc - EMMC sub system

env - environment handling commands

exit - exit script

ext4load- load binary file from a Ext4 filesystem

ext4ls - list files in a directory (default /)

ext4size- determine a file's size

false - do nothing, unsuccessfully

fastboot- use USB Fastboot protocol

fatinfo - print information about filesystem

fatload - load binary file from a dos filesystem

fatls - list files in a directory (default /)

fatsize - determine a file's size

fdt - flattened device tree utility commands

forceupdate- forceupdate

get_rebootmode- get reboot mode

get_valid_slot- get_valid_slot

go - start application at address 'addr'

gpio - query and control gpio pins

hdmitx - HDMITX sub-system

help - print command description/usage

i2c - I2C sub-system

icache - enable or disable instruction cache

imgread - Read the image from internal flash with actual size

irkey - irkey <timeout> <key1> ...<keyN> - maximum value of N: 10

itest - return true/false on integer compare

jtagoff - disable jtag

jtagon - enable jtag

keyman - Unify key ops interfaces based dts cfg

keyunify- key unify sub-system

loop - infinite loop on address range

macreg - ethernet mac register read/write/dump

md - memory display

mm - memory modify (auto-incrementing address)

mmc - MMC sub system

mmcinfo - display MMC info

mw - memory write (fill)

mwm - mw mask function

nm - memory modify (constant address)

open_scp_log- print SCP messgage

osd - osd sub-system

phyreg - ethernet phy register read/write/dump

ping - send ICMP ECHO_REQUEST to network host

printenv- print environment variables

query - SoC query commands

rarpboot- boot image via network using RARP/TFTP protocol

read_temp- cpu temp-system

reboot - set reboot mode and reboot system

reset - Perform RESET of the CPU

rsvmem - reserve memory

run - run commands in an environment variable

saradc - saradc sub-system

saradc_12bit- saradc sub-system

saveenv - save environment variables to persistent storage

sdc_burn- Burning with amlogic format package in sdmmc

sdc_update- Burning a partition with image file in sdmmc card

set_active_slot- set_active_slot

set_trim_base- cpu temp-system

set_usb_boot- set usb boot mode

setenv - set environment variables

showvar - print local hushshell variables

silent - silent

sleep - delay execution for some time

store - STORE sub-system

systemoff- system off

temp_triming- cpu temp-system

test - minimal test like /bin/sh

tftpboot- boot image via network using TFTP protocol

true - do nothing, successfully

unpackimg- un pack logo image into pictures

update - Enter v2 usbburning mode

usb - USB sub-system

usb_burn- Burning with amlogic format package in usb

usb_update- Burning a partition with image file in usb host

usbboot - boot from USB device

version - print monitor, compiler and linker version

vout - VOUT sub-system

vpp - vpp sub-system

vpu - vpu sub-system

wipeisb - wipeisb

write_trim- cpu temp-system

write_version- cpu temp-system

k1pro#

mainline kernel not support ts interface. thus no good options for me. afl1 add pinctrl tsin driver and add dvb driver. I think only problem k1 pro correct dts for 5.xx kernel. need to modification old dts to 5xx

which log that you needed. uboot or kernel. I have uart and k1pro. which would log in.

linux/amlogic/osd/osd_dev.h was removed from Kernel 3.14.29

it is possible amlogic box work with usb tuner under enigma2 (hw Demuxer and e2procfs) May be work all s805 s905 like dvb receicer with usb tuner?

Big thanks. I am not devoloper but I always follow your threads. Big idea and project. openatv and vdr addon work simultaneously under with libreelec.

pls add write e2procfs for k1pro csylvian

Quote from McGregor San

Hello good night, sorry my poor English. In KII Pro can you use the DVB T turner? I can only use DVB S.

Any ideas?

Thanks

PD: Sorry i read another topic for the DVB now

you can use only one tuner. not use simultaneously dvbs/dvbt or dvbc Because it has one tuner. But you can use usb dvb tuner

Quote from 2ami

oscam conf? here is mine

i believe the channel encrypt using powervu des, current tvheadend has trouble decrypt it

Code

[global]
logfile                       = /var/log/oscam.log
pidfile                       = /var/log/pid.log
nice                          = -1
maxlogsize                    = 50
preferlocalcards              = 2
usrfile                       = /var/log/oscamusr.log
cwlogdir                      = /var/log/cw.log
emmlogdir                     = /var/log/emm.log
ecmfmt                        = /var/log/ecmformat.log

[streamrelay]
stream_relay_enabled          = 0
stream_emm_enabled            = 0

[dvbapi]
enabled                       = 1
au                            = 1
pmt_mode                      = 4
delayer                       = 60
ecminfo_type                  = 1
user                          = tvh
read_sdt                      = 1
write_sdt_prov                = 1
extended_cw_api               = 1
boxtype                       = pc

[webif]
httpport                      = 8888
httptpl                       = /etc/tuxbox/config/tpl/
httprefresh                   = 30
httppollrefresh               = 3
httpshowuserinfo              = 1
httpshowcacheexinfo           = 1
httpshowecminfo               = 1
httpshowloadinfo              = 1
httpallowed                   = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log               = 1

Display More

can you share server.conf with reader for powervu

Quote from 2ami

@afl i was watching channels from Measat C 91.5E, here's the result with powervu channel

using version service.tvheadend42-8.2.112h

AXN runs perfect

BBC Earth runs smooth but no sound

Setanta HD blank

using service.tvheadend42-8.2.200a.zip

AXN stuttering with sound

BBC Earth stuttering with sound

Setanta HD blank

i'm using latest 11391 oscam emu

do you have any clue?

Display More

I try 4.8 est powervu channels and oscam found key 2ms but no picture channels. Pls share your oscam config for powervu. Official tvheadend dont support extended cw Oe 2.0 and 2.1.

the tuner work with turkey cable (DVB-C) operator Teledunya and that is better signal quality than KII pro. find all tp. I can watch everthing

Only problem Continuity counter error like KII pro. but that is not important for me.

Quote from 2ami

@afl i was watching channels from Measat C 91.5E, here's the result with powervu channel

using version 8.2.11

AXN runs perfect

BBC Earth runs smooth but no sound

Setanta HD blank

using 8.2.20

AXN stuttering with sound

BBC Earth stuttering with sound

Setanta HD blank

i'm using latest 3.91 oscam emu

do you have any clue

Display More

where I can find 3.91 oscam add on for libreelec

thanks kszaq

Quote from kszaq

taki It's already included in my builds.

Kszaq where is kernel patch for 3.14 or source. I tryed rpi patch

Tda18250.c dont compile with

linux/regmap.h