I have synchronise (Audio/Video) and flicker of Video issues with this version on live TV.
Beta 1 is working.
Other stuff is currently not test/usable due to hardware issues of the file server.
I have synchronise (Audio/Video) and flicker of Video issues with this version on live TV.
Beta 1 is working.
Other stuff is currently not test/usable due to hardware issues of the file server.
No problem, just want to ask just in time.
Hi,
This is my first try for the ALPHA channel. On a Intel i3 box I see currently only one issue.
The video callibration is not stored. If users switches the profiles or the box is rebootet the large parts left and right are missing. Is this a known issue?
-- Tolotos
Thank you, I installed my HTPC from scratch and run the script immediately. Hoping now the issue is resolved.
Hi,
Today I get a second HTPC from a fried. His HTPC doesn't support 4k as my TV-Set and JTPC do. With his I have no troubles, my is not working for mounthes.
Is it possible to force LE to use only HD resolution over the console connection?
-- Tolotos
Today it occoured again.
I started the TV and wait until the "Aktive Input Message" vanished. Next I started the HTPC --> no screen visible.
The first logs are direct after the start log-2017-05-19-15.13.20.zip
The second ones are after a reboot over ssh log-2017-05-19-15.16.24.zip
Hi,
after the update to LE v8.x I have sometimes a black screen on my TV.
It's a Intel based HTPC connected vi HDMI to a Panasonic Viera TV.
There is no boot sequence visible on the TV.
After waiting some hours it works again.
The box is used in the living room - the family is not happy
Any ideas?
-- Tolotos
Thank you - it works like a charm!
Hi,
How can i use the creator behind a proxy/firewall?
There is no direct connection to the internet only http(s) over proxy.
-- Tolotos
josefelix
I'm using Amber as skin. Other skins (even touch enabled ones) are not working for me.
There is no additional hardware for the touchscreen only a SSD for SD-Card replacement.
-- Tolotos
Its working - see my post including images.
Hmm, in the posts above updates are the question - but I want to install a komplete new PC with empty drive.
So follow the posts above the only way is install OE with a IMG and crossgrade to LE using the TAR or using the Millhouse IMG of LE but no direct install?!
The official alpha is not available as IMG - how can I create a USB-Stick for installation of a new HTPC from the tar file?
Just format as FAT32 and extract the jar to the stick?
Read here: OpenELEC Mediacenter - OpenELEC Forum - Raspberry Pi USB boot/storage - THE RIGHT WAY! (1/5) it's the same for LE, or any other OS on the Raspy.
The openelec link is realy long.
In short what I did:
1) Connect the adpater board with the msata drive and the SDcard of the pi to a linux system (CuBox-I in my case)
2) Figure out which device they are (dmesg or simple try opening /dev/cd[a..z] with parted
3) Create one primary partition (type 0x83) on the msata drive
4) format the new partition as ext4 (mkfs.ext4 /dev/sd<your letter>1
5) mount the new partition and the data-partition (type 0x83) of the SDcard
6) copy all (including the hidden directories e.g. .cache) to the new drive
7) change cmdline.txt on the SDcard (first partition FAT32) from
boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 ssh quiet
to
boot=/dev/mmcblk0p1 disk=/dev/sda1 ssh quiet
connect the msata dapter board to the pi
9) insert the SDcard into the PIs slot
10) power on and check/enjoy
-- Tolotos
Thanks, the SSD is now running.
Here two pictures:
Dropbox - Kodi_Touch_Front.jpg
Dropbox - Kodi_Touch_Back.jpg
-- Tolotos
Thank you for the answer.
I got my msata SSD and connected it to the Pi today.
A /dev/sda device is shown up - unfortunately theres no fdisk available.
How can I partition and format the new drive from libre elec?
-- Tolotos
Hi,
is it possible to add an installation dialog like the generic builds to the Pi builds.
I plan to add small SSD to my Pi to hold the system and usd the SD-card only for boot.
Delock Products Delock Converter Raspberry Pi USB Micro-B female / USB pin header > mSATA 6 Gb/s
Kingston SMS200S3/30G
This can be done manually but an installer (and support on updates) would be nice.
-- Tolotos