Are there any Intel versions? I have moonlight running with sound and full controller support but can't stream 1080p without any lag. If there isn't any compiled version can anyone tell me how to add hardware acceleration for Intel to moonlight.
update moonlight-embedded to 2.4.3
-
hdkiller -
September 9, 2017 at 9:02 PM -
Thread is Unresolved
-
-
Hope the coding goes on and we get the defect status away!
-
Still might be worth testing on latest 8.X build to confirm its not a problem with 9.X!!
I have tested moonlight script (8.2.107) on LE 8.2.5 and doesnt work either. I m not on LE alpha as i always stay on stable releases so i dont know if newer scripts will work on alpha builds. My GFE is 3.14.1.48 and my driver 399.07
-
-
The problem is rather on GFE updates which always (?) "breaks" smth on the moonlight-embedded add-on. Developers should always check if newer GFE updates break this addon or not and work for a solution. It's time spending procedure i know..:(
For now, i guess we need GFE 3.9.0.97 and a way to stop GFE from auto-updating - which is smth that most of the times work - but not always. I used to have GFE 3.9.0.97 for a long time but suddenly it auto updated to a newer version (dont remember what this version was). I m using a win7 machine.
-
I know prevent GFE from updating is painful!
I'm using firwalling on Windows and edit the host file.
So login in GFE works, streaming to Kodi/Moonlight works and nothing more
What i do is to start GFE 3.9.0.97 and lets GFE specifying the graphics card for enabling shield options.
When its done i kill the GFE process immediately with Process Explorer to prevent updating.
Then a little firewalling with Windows Firewall Conttrol and editing the host file!
-
How do y do the firewalling thing in win?
-
-
Hmm.. In allowed programs i see that there are several nvidia's features enabled (look at the photo below). Should i disable some of them or all?
-
Works on x64 and Rpi. Sound fix is only needed for x64 version. Been using g it for weeks without a problem. Also block auto update on LibreELEC device. Keep at 105 version
-
Here my from WFC. I know these rules can be optimized but works for me:
-
Thanks Cris_ will check it out. Thanks davidsilva too but y use a rather old gfe version (even older that 3.9.0.97 which seems to be the latest gfe version that works with this addon) and there is too much fiddling with windows permission settings. Will have it in mind though, but first of all let's see if @devs could somehow update the addon to make it work with latest gfe.. Dont know if this project is dead but back in the days when this addon worked it was amazing
-
Hello! If I install the latest Geforce Experience version I have the shield tab but when I install
NVIDIA GeForce Experience 3.9.0.97 the shield tab dissapears. My gpu is a 1070ti.
-
First of all completely remove the GFE 3.9.0.97 with DDU (Display Driver Uninstaller) and install it again.
You should now see a share tab (under settings) like this:
-
First of all completely remove the GFE 3.9.0.97 with DDU (Display Driver Uninstaller) and install it again.
You should now see a share tab (under settings) like this:
Thanks for the reply! I tried many times but still the same result...
-
Which driver version do y have? If you use the latest (416.34 - at least for my card -as we speak) uninstall it and use a previous one e.g 399.07 or even 388.XXX to see if this works for you.
-
I have this working just fine. I'm on here just to vent that updating to version 9.0.110 essentially disables the plugin then I have to manually roll back to 109. I say just put a note when you go into settings stating the newest version doesn't work with the latest GFE.
And to make this post not useless garbage here is what I did to make it work (going from memory a bit).
On Windows:
- use DDU to completely uninstall nvidia.
- reinstall the latest drivers but no GFE (in my case 416.64-desktop-notebook-win8-win7-64bit-international-whql.hf.exe)
- installed NVIDIA_GeForce_Experience_v3.12.0.84.exe (possibly v3.14.1.48, will have to check later)
- enable shield, do PIN etc
- disabled GFE auto-updating on boot by adding to the hosts file
On Libreelec (RPI3B+ wired)
- running "Moonlight Embedded 2.4.6" (don't remember if I manually updated it)
- FPS : 60
- bitrate : 20000
- packet size : 1024
- remote opt. : on
- don't allow gfe : on
- play audio locally : on
- stream 5.1 : off
- audio device : sysdefault
- had to manually change some files so my wireless ps3 controllers would work
- probably made other changes I forgot about
-
The Kodi Add-on in this thread that installs in my configuration only has moonlight.embedded 2.2.2. How does one update to 2.4.7? or is it even possible?
I'm running LibreELEC 9 Generic (Intel NUC) and I can't get the proper GFE and Moonlight version configuration to get the talking.
TIA!
