Wetek Play 2 - Only SD, nand not working

ThomasP · July 15, 2017 at 6:17 PM

Hello LibreELEC-Friends,

a few days ago I bought a Wetek Play 2. Android and Libreelec from SD work fine. But i want to have Libreelec in the nand. Booting into recovery and the installation itself were no problem. But if i want to reboot there comes only a message "sh: can't access tty; job control turned off". I tried several sd cards, same result. Reflashing the original android is no problem, too. I took the right image from the original LibrELEC site. What can i do? Thank you in advance!

**lrusak** · July 15, 2017 at 6:47 PM Official Post

Try updating the android OS first then flash LibreELEC

ThomasP · July 15, 2017 at 7:05 PM

The newest WeOS 3.1is installed.

**chewitt** · July 16, 2017 at 7:30 AM Official Post

Make sure you follow instructions correctly. You do not copy the contents of the zip file to the SD card. You copy the contents of the folder within the zip. It's subtly different, but one results in a working "recovery" SD card that will install to eMMC (WP2 has no NAND) and the other does not.

ThomasP · July 16, 2017 at 9:46 AM

To be sure, you mean tht four files

db.img

factory_update:param.aml

LibreELEC-WeTek_Play_2.aarch64-8.0.2-update.zip

recover.img

or the content of

LibreELEC-WeTek_Play_2.aarch64-8.0.2-update.zip ?