NUC Cold Boot Prolbem

Hi

I have a Apollo Lake NUC and have installed latest beta of LE on a USB drive.
First boot after install was fine.
However next day after a cold boot it boots and I see "Error in mount_flash mount common cannot mount LABEL=System"
Only way to boot is to reboot 2-3 times and then it boots.
This has happened for past 3 days.
BIOS set to both EFI and Legacy.

Any suggestions?

Quote from vitorp07

Try disabling Fast boot in Bios and switch to "Legacy" or "UEFI" only.

Fast boot already disabled.
Switching to Leagacy or UEFI only dont make any difference.
Is there known issue with USB 3 sticks for installing it on?

Quote from vitorp07

In my case for LibreELEC i prefer using a USB2.0 port from the motherboard, i get less problem.
As for the USB drive, USB2 or 3.0 don't make any difference now.

Try messing around with "xhci/ehci hand-off" in Bios

Will try that thanks.
I dont really want to mess about and change the ports to usb 2 via motherboard.
Might break it as small boards and me dont mix well ha ha

Just ordered a SD card instead so will install on there to try to see if it helps and will check xhci too.
Thanks

Quote from Trend

Try a cold boot whit a usb keyboard in the nuc v7.95.1 BETA

Works for me  

Its fine now. Was using USB3 stick and switched to 2.0 and its booting every time now. Thanks