I guess you enabled the setting?
LibreELEC Krypton/Leia/Agile build for Odroid C2, Rock64, WeTek Hub, WeTek Play2
-
GDPR-1 -
January 27, 2017 at 8:28 AM -
Closed -
Thread is Unresolved
-
which setting do you mean
I guess you enabled the setting?
which setting do you mean
-
yes i enabled Start stop and always. No chance . at first start up it wont switch to correct frame rate.
-
android firmware is updated. any orther ideas? issue still there
-
android firmware is updated. any orther ideas? issue still there
What version are you using? Please provide debug logs.
-
i tryed both jarvis and krypton. same Problem raybuntu. i need to restart the device to get correct frame rate.
-
i tryed both jarvis and krypton. same Problem raybuntu. i need to restart the device to get correct frame rate.
I do not provide jarvis builds. Are you sure you are using my builds?
-
i think it is a major problem on all wetek hubs.
-
i think it is a major problem on all wetek hubs.
I'm sorry for you but I can't reproduce it on my Wetek Hub using my build. This Topic is mainly about my community builds.
-
Recently I've contributed with an update to lcdproc together with another user to support a different type of OLED display and a VFD display.
I saw that it's not yet in the new builds.
The build toolchain Isn't supposed to get the latest sources from the github from this repo ?
GitHub - lcdproc/lcdproc: Client/server suite for controlling a wide variety of LCD devices
?
-
Recently I've contributed with an update to lcdproc together with another user to support a different type of OLED display and a VFD display.
I saw that it's not yet in the new builds.
The build toolchain Isn't supposed to get the latest sources from the github from this repo ?
GitHub - lcdproc/lcdproc: Client/server suite for controlling a wide variety of LCD devices
?
The last package bump was in March 2017: History for packages/addons/service/lcdd/package.mk - LibreELEC/LibreELEC.tv · GitHub
You can contribute a package bump. There is nothing happening automatically here. Package is still at git 466edd3
-
I'm not very familiar with git. I just use it the dumb way:
pull, push, merge, rebase, commit
:))
So what's a package bump and how should I create it ?
-
Thanks.
-
-
Hi guys,
After a bit of troubleshooting for my Wetek Hub Bluetooth.
I installed to NAND using the latest build from here - WeTek Hub – LibreELEC
I then SHH's in did a
Codetouch /storage/.update/.nocompatfollowed by a
Codewget https://github.com/Raybuntu/LibreELEC.tv/releases/download/rb-leia14/LibreELEC-WeTek_Hub.arm-9.0-rb-leia14.tarAfter reboot - I turned on Bluetooth in the LibreElec settings but when I go to the Bluetooth settings I get a No adapter present message.
lsmod over ssh outputs
Code
Display MoreLibreELEC:~ # lsmod Module Size Used by 8021q 17367 0 btsdio 2962 0 bluetooth 238085 6 btsdio 6lowpan_iphc 5871 1 bluetooth ir_lirc_codec 4025 0 lirc_dev 6771 1 ir_lirc_codec meson_ir 3657 0 rc_core 21779 4 lirc_dev,meson_ir,ir_lirc_codec mali 183319 5 dhd 694992 0 cfg80211 230552 1 dhd amlvideodri 10458 0 videobuf_res 5082 1 amlvideodri videobuf_core 16059 2 amlvideodri,videobuf_res videodev 131290 1 amlvideodri LibreELEC:~ # service bluetooth status -sh: service: not foundany thoughts?
