RTL8188EUS

Hi,

I have the TL-WN725N that was the RTL8188EUS chipset and when i connect to a network my RPI2 frezes on configuration step!
I'm using the version 7.0.1 of LibreELEC.

Manufactor:
TL-WN725N

LSUSB:
Bus 001 Device 004: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter

DMESG:
dmesg rpi2 - Pastebin.com

Quote from lrusak

Please pastebin the output of

Code

lsusb -vvv

and

Code

lsmod

lsusb -vvv
Lsusb -vvv - Pastebin.com

lsmod
Module Size Used by
8021q 16074 0
cfg80211 229385 0
8188eu 688743 0
bcm2835_wdt 2777 0
bcm2835_gpiomem 2652 0

Some Extra Info:
LibreElect 7.9 problem persists.
OpenElect 5.95+ have the same problem.
Xbian and Raspbian latest version works fine.

This problem first appear when i instaled the version 5.95 of OpenElect, 5.0.8 works just fine.

Regards

Quote from chewitt

Code

echo "0bda 8179" > /sys/bus/usb/drivers/8188eu/new_id

do that. Working?

Same problem happens using the 8179 driver.

Quote from lrusak

try disabling power management

Code

echo "options 8188eu rtw_power_mgnt=0" > /storage/.config/modprobe.d/8188eu.conf

then reboot and see if that helps

Tried and no changes. Same problem.

Quote from bluenote

This is the only adapter on sale right now, but without a return policy, so I'd like to know if this eventually got supported?

thanks

It works fine on the latest version of LibreELEC.

Although it works fine on the 7.95 versions it has the same problem on 8.00+